This is a Front & Rear Suspension Pin Set for the Traxxas Jato 2.5 and 3.3 trucks.

This is a set of two (2) Traxxas Jato 2.5 and 3.3 Rear GTR Shock Springs with the 1.4 Pink Weight Rating.

This is a set of two (2) Traxxas Jato 2.5 and 3.3 Front GTR Shock Springs with the 0.7 Yellow Weight Rating.

This is a set of Cylinder Head Gaskets for the Traxxas TRX 2.5 engine. FEATURES:Copper construction.Three different thickness allow you to taylor your compression. INCLUDES:One each of the following thickness of gaskets: 0.15", 0.25" & 0.35"...

This is the Clutch Bell with Washer and E-Clip for the Revo. FEATURES:Metal constructionFive cooling holes on the face of bell (bellow the teeth) INCLUDES:One clutch bellTwo teflon washerTwo e-clip REQUIRES:This clutch bell uses different bearings than...

This is a set of four Aluminum Front Wheel Spacers for the Traxxas Jato 2.5 and 3.3 trucks. Set of four steel wheel spacers for Jato Twin-Spoke wheels. Replacement Part ForJatoNitro Rustler

These are the Stock Replacement Rear Turnbuckles for the Traxxas T-Maxx 2.5. These are the adjustable connecting rods. FEATURES:Thicker steel construction. INCLUDES:Two turnbuckles with pre-installed rod ends and balls. REQUIRES:Nothing.  These are...

These are the Optional Transmission Output Yokes for Traxxas vehicles. FEATURES:Features strengthened plastic for long life and durability.These diff yokes are more rigid than the stock yokes.Black in color. INCLUDES:Two heavy duty diff yokesTwo diff...

This is a set of six Traxxas 3mm x 10mm Shoulder Screws for the Jato 2.5 and 3.3 trucks.

This is a set of six Traxxas 4mm x 18mm Countersunk Machine Screws for the Jato 2.5 and 3.3 trucks. 4x18 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for these modelsJatoXRT  

This is a set of six Traxxas 2.5mm x 8mm Countersunk Machine Screws for the Jato 2.5 and 3.3 trucks.

This is the Replacement Set of Turnbuckles for the Traxxas T-Maxx 4WD Radio Control Monster Truck.These turnbuckles link the rear bulkheads to the axle carriers and provide toe-in adjustment for the rear wheels. FEATURES:Replaces damaged or worn...

This is the RDLogics Blue Aluminum Dual Exhaust System with Twin Stingers for the Traxxas Revo 2.5 and 3.3 monster trucks.  Not only will you see an increase in power and performance, but these look great...

This is the RDLogics Polished Aluminum Dual Exhaust System with Twin Stingers for the Traxxas T-Maxx 2.5, 2.5R, and T-Maxx 3.3 monster trucks. Not only will you see an increase in power and performance, but these look great too! The sound of this is MUCH...

This is the RDLogics Blue Aluminum Dual Exhaust System with Twin Stingers for the Traxxas T-Maxx 2.5, 2.5R, and T-Maxx 3.3 monster trucks. Not only will you see an increase in power and performance, but these look great too! The sound of this is MUCH...

This is the Team Integy Silver Aluminum Wheelie Bar for the Traxxas Jato 2.5 and 3.3 trucks.  This looks awesome, and it helps prevent your high-performance Jato truck from flipping over backwards onto its lid.  This prevents...

This is a Team Integy 38-Tooth Steel Spur Gear for the Traxxas Revo 2.5 and 3.3 trucks. A higher number of teeth on the spur gear will give you more acceleration, while a lower number of teeth will give you more top-end speed. FEATURESTwo-piece...

This is a pair of Team Integy Blue Aluminum 90T Progressive 1 Rear Rocker Arms for the Traxxas Revo 2.5, 3.3, E-Revo, E-Revo Brushless, Summit, and Slayer trucks.  These look awesome, and they are very strong.  They look excellent on...

This is the Team Integy MSR6 Silver Aluminum Piggyback Shocks with Aluminum Shock Mounts for the Traxxas Revo 2.5 and 3.3 trucks. These look awesome. The included shock mounts are much stronger than the stock plastic parts. These are a must on show...

This is an Integy 0.05" Replacement Tip for the Team Integy Ti-Nitride Hex Wrench Set.  This is an inexpensive way to get your tools back in perfect condition again. FEATURES Hex wrench tips have a high degree of tolerance to lock screws into...

This is the Hitec HS-225BB Mighty Mini Universal Ball-Bearing Servo.  This servo has a universal connector, which means it will work with Futaba, JR, Hitec, and Airtronics Z style radios.  The servo lead on this servo is about 10" long. The...

This is a 2 oz bottle of Great Planes Thick/Slow Cure Pro CA.  The Pro CA Glues are clog-resistant with extra-long applicator tips to easily reach into tight spots.  Easy to squeeze bottles aid in applying just the right amount of glue-for...

This is a 2 oz bottle of Great Planes Medium Pro CA glue.  Medium CA is for normal construction, and will work with small gaps.  The Pro CA Glues are clog-resistant with extra-long applicator tips to easily reach into tight spots. ...

This is a 2 oz bottle of Great Planes Thin Pro CA.  Thin CA is instant setting.  The Pro CA Glues are clog-resistant with extra-long applicator tips to easily reach into tight spots.  Easy to squeeze bottles aid in applying just the...

This is a pair of Traxxas Assembled GTR Shocks with Shock Oil for the Revo 2.5, 3.3, Slayer, Slayer Pro, Jato, and XO-1 vehicles. Springs are not included.  These come fully assembled as shown, and you just need to put your stock springs on these,...

This is a pair of 3.8 rate (gold) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small gold square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the Revo SPECS:Length:...

This is a Green Tension Shock Spring Set for the Revo GTR Shocks. These springs are installed on the shock bodies. FEATURES:Red in colorGreen band on spring indicates 3.5 tension rating INCLUDES:Two 3.5 rear shock springs REQUIRES:Nothing.  These...

This is a Green Tension Shock Spring Set for the Revo GTR Shocks. These springs are installed on the shock bodies. FEATURES:Red in colorOrange band on spring indicates 3.2 tension rating INCLUDES:Two 3.2 rear shock springs REQUIRES:Nothing.  These...

This is the White Tension Shock Spring Set for the Revo GTR Shocks These springs are installed on the shock bodies. FEATURES:Red in colorWhite band on spring indicates 2.9 tension rating INCLUDES:Two 2.9 rear shock springs REQUIRES:Nothing.  These...

This is a Two-Speed Standard Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 39T 2nd speed gearOne 13T/17T input gearOne screw...

This is a Two-Speed Wide Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 38T 2nd speed gearOne 13T/18T input gearOne screw pin REQUIRES:Installation...

This is replacement Traxxas Revo Differential Housing for the front or rear of the Revo 2.5 or 3.3 truck.  These are made of durable black nylon.

This is the Engine Mount for the Traxxas Revo, TRAC71**.This mount attaches engine to chassis. FEATURES:Constructed of aluminum INCLUDES:One middle and two outer mount sections and all mounting hardware REQUIRES:Fastening sections to chassis and engine2...

This is a Traxxas Progressive 2 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5319 and TRA5319X pushrods.  If you need the pushrods too, search our store for the listed part numbers.

This is a Traxxas Servo Horn Set for the Revo 2.5 and 3.3 trucks that works with non-Traxxas servos.  Included are steering and throttle servo horns to fit JR, KO, Hitec, and Airtronics servos.  You must use these when upgrading to...

This is a Traxxas Revo 2.5 and 3.3 Replacement Rear Bumper and Mount.  This is a stock replacement for a commonly broken part.  Mounting screws are included.

This is a Traxxas Revo 2.5 and 3.3 Replacement Front Bumper and Mount.  This is a stock replacement for a commonly broken part.  Mounting screws are included.

This is a set of Traxxas Rear Bulkheads with Rocker Shafts for the Revo 3.3, E-Revo, E-Revo Brushless, and Slayer Pro trucks. These are stock replacements.FEATURES:Black plastic constructionRocker shafts preinstalledINCLUDES:Rear bulkhead halves(2)...

This is the Traxxas Air Filter Housing for the T-Maxx 2.5. This attaches to the throat of the carburetor. FEATURES:Black plastic air filter housing with cover screen and changeable elementRubber angled neck for filterRubber adapter for filterZip tie...

This is the Carburetor Body, Fuel Inlet Plug, and three O-Rings for the Traxxas 2.5 and 3.3 engines. FEATURES:Carb body constructed of composite material, inlet plug is aluminum, and O-rings are rubber INCLUDES:One Carburetor Body, Fuel Inlet Plug, and...