This is the Traxxas TRX-4 Roof Basket for use with the #8011 Series Bodies and #8216 ExoCage.FitsTRX-4

This is the Hot Racing Traxxas X-Maxx Aluminum Front/Rear Anti-Sway Bar Kit (also known as anti-roll bar, sway-bar, or sway bar). This can only be used with Hot Racing XMX55X01 suspension arms.FEATURES:- Designed for quick response, this system keeps...

This is the Hot Racing Red Aluminum Steering Arm Post for Traxxas 1/16 E-Revo, Slash, Summit, and Rally vehicles. This will fit brushed and VXL brushless versions of these 1/16 cars and trucks. This is a direct replacement for Traxxas part 7043...

This is the Hot Racing Silver Aluminum Rear Skid Plate for the Traxxas Slash 2WD trucks. This works on XL-5 brushed and VXL brushless trucks.FEATURES:Made of silver machined 3mm thick 6061-T6 aluminum.The mounting holes are pre-drilled and are...

This is the Hot Racing Blue Aluminum Adjustable 5mm Bearing Stinger Drive for Traxxas Spartan and Spartan SR boats.FEATURES:- CNC machined billet aluminum construction- Allows fully adjustable prop angle of attack for optimization of acceleration, speed,...

This is the Hot Racing Black 6061-T6 Aluminum Rear Shock Tower for Slash 4x4, Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks. Replaces: Stock TRA6839 front shock towerFEATURES:6061-T6 Aluminum constructionBlack anodized colorMuch stronger than stock...

This is the Hot Racing Black 6061-T6 Aluminum Front Shock Tower for the Slash 4x4, Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks. Replaces: Stock TRA6839 front shock towerFEATURES:6061-T6 Aluminum CNC construction.Black anodizedMuch stronger than stock...

These are Traxxas 12x18x4mm Black Rubber Sealed Ball Bearings (2). Each package contains two bearings. Includes: a Pair of 12x18x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for...

This is the Traxxas X-Maxx 8S Dual Cooling Fan Kit for Velineon 1200XL Motor. This is for the 1200XL motor only. Replacement dual cooling fans and shroud fit over the 3362 aluminum heat sink for Velineon 1200XL and 1600XL motors. Replacement Part...

This is the RC4WD 1/10 Scale KC HiLiTES High Performance 100mm / 4" LED Light Bar. These have been Officially Licensed by the KC HiLiTES Company. This will make any scale project look better and add much needed lighting. Detail like no other lights out...

This is the Traxxas Aton Motor LED Lens (Red) - Left & Right. This is Traxxas part number 7961Part Number: 7961 / TRA7961FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas Aton Rear Left & Right LED Lens (Red). This is Traxxas part number 7956Part Number: 7956 / TRA7956FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas Aton 2.6x5mm Button-Head Machine Screws (Hex Drive) (6). This is Traxxas part number 7944Part Number: 7944 / TRA7944FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us...

This is the Traxxas X-Maxx Rear Shock Tower. This includes both the left and right halves.FeaturesTwo-piece molded composite plastic construction, dark gray in colorIncludes: Left and Right Rear Shock Tower Halves

This is the Traxxas Driveshaft, steel constant-velocity, 1/16 E-Revo (shaft only, 68mm)/ drive cup pin (1). This is Traxxas part number 7153Part Number: 7153 / TRA7153Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave DiggerMore detail coming...

This is the Traxxas Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2). This is Traxxas part number 6846Part Number: 6846 / TRA6846FitsSlash 2WD VXLSlash 2WD VXL (low CG)Slash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4...

These Traxxas (225mm) Battery StrapsIncludes: 4 battery strapsSpecificationsLength: 9" (228mm)Width: .62" (16mm)Replacement Part ForDCB M41 WidebodyDisruptorSpartan

This is the Traxxas Finned Aluminum Motor Mount for 1/10 E-Revo and Summit trucks.SpecificationsLength: 58.2mm (2.29")Width: 41mm (1.61")Height: 22.8mm (0.90")Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Summit

This is the Traxxas Transmission Input Slipper Shaft for the Revo 3.3, T-Maxx 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

These are the Traxxas 3x10mm Roundhead Self-Tapping Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashSkullyStampede XL-5 2WD

These are the Traxxas 4x22mm Button-Head Hex Drive Machine Screws (6). 3x10 mm cap-head machine screws with hex drive heads. Set of six.Includes: Six 4x22mm Button Head Machine Screws Replacement part for these models4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

This is the Robinson Racing Extra Hard 17-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...

This is the RPM Blue Nerf Bar Set for 1/10 Rally & Slash 4x4 Ultimate and Low-CG Chassis Trucks. This will only fit vehicles running the low-CG chassis.RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces...

This is a pair of Traxxas GTR Shock Springs (Long .767 Black) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

This is the RC4WD Warn 9.5cti Winch for 1/10 Scale Rock Crawlers and Trail Trucks. Warn is one of the most iconic names in off-road. This winch offers ultra scale looks, and superior quality and craftsmanship. It is officially licensed by Warn...

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry SystemSpecifications5mm x 2mm round magnet Replacement Part...

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit vehicles.FEATURESNylon constructionBlack in colorINCLUDESTwo YokesTwo 3x10mm Screw PinsREQUIRESInstallation on the vehicle

These are the Integy 12mm Silver Aluminum Wheel Hubs for the Traxxas Stampede, Rustler and Slash FEATURES Silver anodized aluminum INCLUDESFour Aluminum Hex Wheel Hubs REQUIRESAssembly onto the truck SPECSInner Diameter: 0.19"  (5mm)

This is a set of Integy Titanium Turnbuckles for the Traxxas 1/10 Rustler and Slash XL-5 and VXL trucks. These feature blue anodizing on the rod ends. FEATURES Titanium Construction Blue and Silver in Color Assembled w/Rod Ends INCLUDESTwo 90mm...

This is a pair of the Traxxas Chrome Rear All Star Wheels with pre-mounted Anaconda Tires. These are perfect for the rear of the Stampede, Rustler, and other electric vehicles. FEATURES:Chrome plated plastic, five spoke designSplit X-Pattern tread...

This is the Brake Cam Lever for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Brake Came LeverOne Linkage Brake BellcrankOne Brake Bellcrank Rod REQUIRES:Assembly onto Vehicle

This is the Integy 40-Piece Progressive Spring Set for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, and E-Maxx trucks.  There are 40 springs included for a total of 5 complete spring sets.  These spring sets will allow you to better tune...

This is a set of Traxxas Revo Assembled GTR Anodized Shocks (4).  The GTR shocks work well with all versions of the Revo, including the 2.5, 3.3, E-Revo brushed & brushless, and the Slayer trucks.  These are an excellent way to upgrade your...

This is a full set of eight Integy MSR4 Red Aluminum Shocks with Piggybacks for all Maxx trucks, including the T-Maxx 3.3.  As you can see in the picture, these shocks look awesome, and the performance is the same.  This set of 8 heavy...

This is Traxxas Dirt Oval Gray Front Wheels with Hoosier Tires (2) Designed for ultimate oval track performance these Licensed Hoosier Angle Block tires deliver race-winning performance for Slash Modified and Late Model race cars. The premium molded foam...

This is Traxxas Dirt Oval Gray Rear Wheels with Hoosier Tires (2) Designed for ultimate oval track performance these Licensed Hoosier Angle Block tires deliver race-winning performance for Slash Modified and Late Model race cars. The premium molded foam...

This is the Traxxas Blue Aluminum 12mm Wheel Hubs - OPEN ITEM *The factory packaging has been opened/torn but the parts have not been used.  The part will be secured properly for shipping.   This set of four 12 mm blue-anodized hex wheel hubs...

This is the Traxxas WideMaxx Steel CV Driveshaft Assembly Single replacement steel CV driveshaft for the TRA10790 WideMaxx steel cv driveshaft set

This is the Traxxas 25-Tooth Pinion Gear (32-pitch) 3 mm Bore 25-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help...

This is the GPM Mini Slash Red 7075-T6 Alloy Rear Upper Suspension Arms Made of aviation-grade aluminum alloy 7075-T6, it combines high strength and light weight while being wear-resistant and impact-resistant. Requirements: All packaging accessories are...