XRT

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Traxxas Transmitter TQi Traxxas Link Enabled 2.4GHz High Output 4-Channel (Transmitter Only) The 4-channel TQi transmitter combines a full complement of tuning features with the...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower...

This is the Traxxas 20-Tooth Machined Pinion Gear (1.0 Mod) 5 mm Bore The 20-tooth pinion gear (1.0 metric pitch) is machined from hardened steel for extra durability and fits 5 mm motor shafts...

This is the Traxxas 20-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 20-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...

This is the Traxxas 20M Weight Differential Oil. Super-thick 20 million weight differential oil has the consistency of thick putty and is most often used in center differentials. It may also be used...

This is the Traxxas Differential Gear Set with Output and Spider Gears. These can be used in the front or rear diff of the truck. Differential gear set includes output gears (2), spider gears (4),...

This is the Traxxas 17mm Splined Wheel Nut Wrench. This is a must-have for vehicles equipped with 17mm wheel nuts. Use this splined wheel wrench for extra leverage on 17 mm hex nuts. Replacement Part...

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shie

This is the Traxxas Premium Shock Oil Set with Spinning Carousel Rack FeaturesSeven precise viscosities ranging from 20wt to 80wt100% silicone oil for maximum consistencyPrecision-pour, twist-nozzle...

This is the Traxxas X-Maxx Suspension Pin Set for 1 corner. The X-Maxx requires 4 packs of these for complete set of hinge pins.Features Steel construction Fastens suspension arms to chassis and to...

This is the Traxxas Premium High-Performance Grease (20cc) for use with X-Maxx trucks. This is a must-have item for X-Maxx truck owners. 20 cc tube of high performance premium grease

This is the Traxxas 20-Weight Silicone Shock Oil (60cc). Traxxas premium 20 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silicone oil allows precise vehicle...

This is the Traxxas Steel 54-Tooth Wide-Face 1.0M Spur Gear 54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you...

This is the Traxxas Steel 50-Tooth Wide-Face 1.0M Spur Gear 50-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you...

This is the Traxxas Steel 46-Tooth Wide-Face 1.0M Spur Gear 46-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you...

This is the Traxxas Digital High-Torque/High-Speed Metal Gear (Ball Bearing) Waterproof Servo Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof Replaces Servo...

These are the GPM Racing Chrome Steel Machined Rear Spiral Cut Differential Ring and Pinion Gears for the Traxxas X-Maxx 8S trucks. This set is a 42T ring gear and 13T pinion gear. Made of chrome...

This is the Traxxas 22-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 22-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...

This is the Traxxas 20-Tooth Transmission Input Gear and 2.5x12mm Pin. 20-tooth transmission input gear. Includes 2.5x12 mm dowel pin.Replacement Part ForX-MaxxXRT

This is the Traxxas TQi 2.4GHz 2-Channel Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver included. Traxxas Stability ManagementTraxxas Stability Management...

This is the Castle Creations Cobra 6 33.6V, 8A Peak BEC ESC w/ 1717-1650KV Sensored Motor COBRA 6 Racer Tested - Basher ApprovedThe COBRA 6, 33.6V ESC W/1717-1650KV SENSORED COMBO is ready to take on...

This is the Castle Creations Cobra 6, 33.6V, 8A Peak BEC ESC w/ 2028-800KV Sensored Motor COBRA 6 Racer Tested - Basher ApprovedThe COBRA 6, 33.6V ESC W/2028-800KV SENSORED COMBO is ready to take on...

This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander. The auto-detectable temperature sensor plugs into...

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged,...

This is the Traxxas 5000mAh 14.8v 4-Cell 25C LiPo Battery (155mm). These can be used in the Maxx 4S, Unlimited Desert Racer (UDR) and X-Maxx 8S trucks.FitsMaxx 4SUnlimited Desert Racer (UDR)X-Maxx...

This is the GPM Racing Hardened Steel 54-Tooth 1.0 Mod Machined Spur Gear. Made with #45 hardened steel, this gear is built for bashing!This can be used as an upgrade to the Traxxas 6449 and 6449X...

This is a pair of Traxxas X-Maxx Paddle Tires on Black Wheels. Add these to your X-Maxx or XRT for ripping through the sand dunes, snow, mud or water! X-Maxx paddle tires offer unbeatable traction in...

This is the Traxxas replacement ESC cooling fan for the VXL-8s speed control. Fits VXL-4s, VXL-6s & VXL-8s Replacement Part ForE-Revo VXL BrushlessMaxxUnlimited Desert RacerX-MaxxXRT Accessory Part...

These are the Traxxas X-Maxx and XRT Suspension Pin Retainers. This includes four pin retainers.Features Molded composite plastic construction Installs with inner suspension pins on upper suspension...

These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color

This is the Traxxas Cush Drive Key, Pin, and Elastomer Damper.FitsX-Maxx 8SXRT

This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws. Set of twelve 3 mm hardened steel grub screwsReplacement part for these models1/16...

These are the Traxxas Cush Drive Housing Front and Rear Halves for the X-Maxx 8S and E-Revo 2.0 brushless trucks.FitsE-Revo 2.0X-Maxx 8SXRT

This is a set of four Traxxas 17mm Splined Serrated red-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel...

This is the Traxxas Differential Housing for the front or rear of the truck.Features Molded composite plastic construction Fastens to front or rear bulkhead Protects differential assembly from...

This is the Traxxas Extreme Heavy-Duty Steel Drive Cups Give your X-Maxx or XRT the toughest driveline possible with these extreme heavy-duty drive cups. The drive cups are machined out of high-grade...

This is the Traxxas Front Lower Bulkhead Replacement front lower bulkhead Replacement Part ForXRT

This is the Traxxas Front Upper Bulkhead Replacement front upper bulkhead. One-piece molded composite plastic construction. Fastens to lower front bulkhead and houses output gear Replacement Part...

This is the Traxxas 24-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 24-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...