Traxxas T-Maxx 2.5 & 3.3
Whether you prefer something that runs off a battery or real live fuel, you’ll love the Traxxas T-Maxx line. There’s more than enough here to keep you going for years no matter what your particular modeling interests might look like. Enough aftermarket components have been made by Traxxas for this line that you could continue to tinker with the same model for years to come. Chances are that you’d be able to seriously dominate many types of tracks with them too, which makes them a great option for hardcore racers.
T Maxx 3.3
Over time, Traxxas has been able to collect a lot of information about the various performance figures of their own vehicles. They’ve put this information to good use by taking it and redesigning countless vehicles. Modern Traxxas T-Maxx 3.3 models offer a 4WD powertrain and a TSM stability management system coupled with TQi telemetry and a number of other high-tech features that might make you feel like you’re driving a miniaturized computer as well as a truck.
In many ways, you actually are! These sophisticated pieces of equipment incorporate advanced computer technology that ensures a level of stability and drivability even when conditions start to suffer for whatever reason.
Traxxas T Maxx 2.5
You don’t want to count out the classic T Maxx 2.5 vehicle either, however, especially if you’re in the mood to drive something that features nitro power. A strong 2.4 GHz transmitter means that you’ll be able to stay in constant communication with your vehicle even if it happens to be on the other side of the track at any given time. Perhaps most importantly, these trucks are compatible with a selection of special fuels from Traxxas. consider 20 percent Nitro car and truck fuel, for instance.
This has the same name as the top fuel materials that real-world hot rods might run on and for a good reason. It’s not all that different from any other kind of nitro-based fuel, so you can expect some strong performance out of it.
Eventually, you might even want to start investing in a selection of replacement parts that can help you out in a pinch.
Traxxas T Maxx Parts
From something as simple as a set of body washers to an extremely complex part like a Bluetooth wireless module, Traxxas T Maxx cars have a wide-ranging catalog of parts that go with them. Whether you’re looking for spares to repair racing accidents or you want to be able to tinker with a vehicle until you can truly call it your own, there are plenty of options available on the market. You may want to start putting together quite a collection, which would ensure that you’d always have something on hand if a part failed on you or if you needed to do some kind of work under your model’s hood.
For more information about what kinds of vehicles and parts are currently being offered, make sure to contact RC Superstore online.
-
TRA2743Traxxas 3mm Hardened Set / Grub Screws (12)
This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws. Set of twelve 3 mm hardened steel grub screwsReplacement part for these models1/16...$3 -
TRA6520Traxxas RPM Sensor (Long) 3x4mm BCS
This is the Long RPM Sensor from Traxxas. The RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry...$12 -
TRA5134Traxxas Caster Spacers & Shims: T-Maxx & E-Maxx
This is a Package of Replacement Caster Spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels. FEATURES:Black nylon construction.$3 -
TRA3182Traxxas Collars with Set Screws (2)
These are the Traxxas Collars with Set Screws. These come in packages of two.Includes:(2) screw collars(2) 3mm set screws Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxNitro...$250 -
TRA3762ATraxxas 3762A XX-Long Grey Ultra Shocks (2)
This is a pair of the Traxxas XX-Long Ultra Shocks (part 3762A) for use on a wide variety of Traxxas vehicles, including the Bandit, Rustler, Stampede 2WD & 4x4, Slash, Hoss, T-Maxx, and more...$18 -
TRA3028Traxxas Molex/Tamiya to Receiver Pack Charging Adapter
This is the Traxxas Molex/Tamiya to Receiver Pack Charging Adapter. This adapter allows you to use a charger equipped with a standard Tamiya-style plug to charge receiver batteries.$3 -
TRA5039Traxxas Oil, Differential (500K Weight)
This is the 500K Weight Differential Oil from Traxxas FEATURES Lubricates differential$8 -
TRA4124Traxxas 24-Tooth Clutch Bell for Jato & T-Maxx
This is the Traxxas 24-Tooth Clutch Bell with Fiber Washers and E-Clips. This can be used on Traxxas 1/10 nitro vehicles.Features:Fits Traxxas 1/10 scale nitro vehiclesConstructed of hardened...$12 -
TRA5246Traxxas T-Maxx 2.5/3.3 Pipe Coupler
This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5 This goes between the tuned pipe and the header FEATURES:Blue silicone constructionFor use with pipes #5152 and #4452$175 -
TRA5267Traxxas Air Filter Body & Filter for T-Maxx 2.5 & 3.3
This is the Traxxas High-Volume Air Filter Body and Filter for the T-Maxx 2.5 and 3.3 nitro trucks. This comes with the filter support, cap, foam filter, T-Maxx filter base (angled), wire mount and...$14 -
TRA5153Traxxas Inner Drive Cups & Screw Pins for Revo/Maxx Steel CVDs
This is a pair of Traxxas Steel Inner Drive Cups with Screw Pins for the Revo 3.3, 1/10 E-Revo, and T-Maxx 3.3 trucks. These are replacements for the drive cups included with the Traxxas 5451R steel...$8 -
TRA5161Traxxas Suspension Screw Pin Set: T-Maxx 3.3 & E-Maxx
This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3. FEATURES Steel construction$9 -
TRA5365Traxxas Brake Pad Set: Revo 2.5, 3.3, T-Maxx 3.3, Slayer
This is a Traxxas Brake Pad Set for the Revo 2.5, 3.3, and T-Maxx 3.3 trucks. These outer calipers come with a bonded friction material. Inner and outer brake calipers with bonded friction material...$750 -
TRA412222T Clutch Bell: NST, TMX .15 and 2.5
This is a Traxxas 22-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec. The higher the number of teeth on your clutch bell, the...$12 -
TRA411818T Clutch Bell: NST, TMX .15 and 2.5
This is a Traxxas 18-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec. The higher the number of teeth on your clutch bell, the...$12 -
HRATRX15EPL06Hot Racing Power Up Slipper Eliminator for Slash 4x4, Stampede 4x4, Revo, E-Revo, Summit, E-Maxx, T-Maxx
This is the Hot Racing Power Up Slipper Eliminator for Traxxas E-Maxx, E-Revo, Rally VXL, Revo 3.3, Slash 4X4, Slayer Pro 4X4, Stampede 4X4, 1/10 Summit, and T-Maxx 3.3.FEATURES:- Eliminates the...$1649 -
TRA2053Traxxas Servo Gear Set for 2055 & 2056 Servos
This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.$4 -
TRA5145Traxxas Screw Pins 4x15mm (6)
This is the Traxxas 4x15mm Screw Pin Set for the Revo and other vehicles. This includes six screw pins. Features: Metal Construction$350 -
TRA2662Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear)
This is the Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear) Set of two XX-long Big Bore shocks provide ultimate dampening control. They’re formed from hard-anodized, PTFE-coated, aluminum...$2695 -
TRA5353RTraxxas 17mm Splined Red Aluminum Wheel Hubs, Nuts & Screw Pins (4)
These are the Traxxas 17mm Splined Red Aluminum Wheel Hubs, Nuts, & Screw Pins for the 1/10 E-Revo, E-Maxx, Summit, T-Maxx, and Revo 3.3 trucks. These allow you to run wheels with a 17mm hex size...$2195 -
TRA5167Traxxas Slide Carb Linkage Bellcrank Post & Hardware for T-Maxx & S-Maxx
This is a Traxxas Slide Carb Linkage, Bellcrank Post, and Hardware for the Traxxas T-Maxx 2.5 and 3.3 trucks with slide carbs.IncludesOne bellcrank postOne bellcrank armTwo 5x8x2.5mm plastic...$275 -
TRA4933Traxxas Pivot Balls & Pivot Ball Cap Bushings (4)
This is a set of 4 Traxxas Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!FeaturesReplaces stock pivot balls and pivot...$6 -
TRA4935Traxxas Satin Finish Bumper: T-Maxx & E-Maxx Trucks
This is a Traxxas Front and Rear Bumper Set for use with all versions of the Traxxas T-Maxx and E-Maxx trucks. These are stock replacements. Fits Traxxas T-Maxx .15, 2.5, 2.5R, 3.3 (both model 4908...$6 -
TRA4933XTraxxas Hard-Anodized 7075-T6 Aluminum Pivot Balls & Ball Cap Bushings (4)
This is a set of 4 Traxxas 7075-T6 Hard-Anodized Aluminum Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!These trick,...$20 -
RPM81065RPM Blue Front Bulkheads for T-Maxx & E-Maxx
This is the RPM Blue Front Bulkhead Set for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.Until now,...$1099 -
TRA2055Traxxas 2055 High-Torque 80 oz/in Steering Servo
This is the Traxxas 2055 High-Torque Servo. This has 80 oz/in of torque, making it an excellent steering servo. This works well in the Traxxas T-Maxx, E-Maxx, Revo or any other vehicle that you...$2495 -
TRA5353ATraxxas 17mm Splined Green Aluminum Wheel Nuts (4)
Traxxas Splined 17mm Wheel Nuts (green-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Traxxas-tough durability. Replacement part...$10 -
TRA5131RTraxxas Upper Suspension Arms (2): T-Maxx 2.5, 2.5R, 3.3, E-Maxx
These are the Upper Suspension Arms for the T-Maxx 3.3. FEATURES:Fastens to bulkhead and helps to support axle carriersBlack in color, constructed of hardened plastic$750 -
TRA3957Traxxas 56T Spur Gear: Jato, T-Maxx 3.3
This is a Traxxas 56-Tooth Spur Gear for the Jato 2.5, 3.3, and the T-Maxx 3.3. The lower number of teeth on the spur gear, the faster the vehicle will be. The higher the number of teeth, the more...$3 -
TRA4983XTraxxas Pro-Built Complete T-Maxx 3.3 Transmission
This is the Traxxas Pro-Built Complete T-Maxx 3.3 Transmission The Pro-Built transmission arrives ready-to-install and precisely assembled to Traxxas’ exacting standards. Pro-BUILT components save...$12995 -
RPM80332RPM Black Snap-Tite RC Car & Truck Body Savers
This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to...$229 -
TRA5256Traxxas O-Ring Exhaust Header for TRX 2.5, 2.5R, 3.3
This is the Traxxas Replacement O-ring Header Gasket for the Traxxas 2.5, 2.5R, and 3.3 Engines. This is located on the header of the engine. Features: Red silicone construction.$120 -
TRA5117Traxxas Ball Bearings, 6x12x4mm (2)
This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance,...$4 -
TRA5407Traxxas TRX 3.3 Engine w/Pull-Start (IPS Shaft)
This is the Traxxas TRX 3.3 Racing Engine with Pull Start. This will give your Revo, T-Maxx 2.5, or Jato an unbelievable boost in performance. This is a must have upgrade. You can also use this...$21995 -
TRA3762Traxxas 3762 Rear XX-Long Ultra Shocks (Black) Complete with Springs and Spacers (2)
This is the Traxxas Rear XX-Long Ultra Shocks (Black) Complete with Springs and Spacers (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. The...$18 -
TRA2041Traxxas Servo case for 2018 Servo
This is a Traxxas Servo Case for 2018 servos.FeaturesReplaces top, center and bottom sections of damaged servo casesConstructed of black plasticIncludesOne Servo Case Set for the Traxxas #2018 Servo...$3 -
TRA4976Traxxas Wheelie Bar Wheels & Axles: T-Maxx 3.3
These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel$4 -
TRA5189Traxxas 4x13mm Screw Pins with Threadlock (4)
This is a set of four Traxxas 4x13mm Screw Pins with Threadlock. These are used on many vehicles, such as the E-Maxx, T-Maxx, Revo 3.3, Slayer, and XO-1.FeaturesMetal ConstructionBlack in ColorHex...$350 -
TRA2553Traxxas 3x15mm Countersunk Hex Head Machine Screws (6)
This is a pack of Traxxas 3x15mm Countersunk Hex Head Machine Screws. Each package includes six screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx BrushlessFunny CarJato 2...$250 -
TRA6542Traxxas 35mm Flywheel with Magnet for Telemetry (RPM)
This is the Traxxas 35mm Flywheel with Magnet for use with the TQi Radio System.FeaturesFor use with Traxxas glow powered vehiclesEquipped with a magnet that enables an RPM sensor to read RPM data ...$8