Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
GPM-SLA055-G
GPM Green Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Green Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
PRO1017410
Pro-Line Badlands MX28 HP 2.8" Belted Tires on Raid 6x30 Adjustable Wheels 12mm Hex
This is a pair of Pro-Line Badlands MX28 HP 2.8" Belted Tires Pre-Mounted on Raid 6x30 Adjustable Offset Wheels with 12mm Hexes. These are the perfect option for vehicles like the Traxxas Stampede 2WD & 4x4, Rustler 2WD & 4x4, and Slash 2WD &...$5399 -
GPM-SLA2W028-BK
GPM Black Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
G3R-T1001-GREEN
Gen3 RC Green Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Green Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$5399 -
GPM-SLA055-B
GPM Blue Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Blue Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
GPM-CRA030-B
GPM Blue Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Blue Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
RPM70835
RPM Blue Rear Bumper for Traxxas Stampede 2WD
This is the RPM Blue Rear Bumper for the Traxxas Stampede 2WD electric trucks. This fits XL-5 and VXL versions, as well as the Bigfoot and Skully versions. Bigfoot #1 may require removal of stock bumper on body.Finally, a rear bumper for the Traxxas...$949 -
TKR1951X
Tekno M6 Driveshafts and Hub Carriers: Slash 2WD, Nitro Rustler, Nitro Stampede & (Rear) Stampede 2WD
These are the Tekno M6 Driveshafts and Hub Carriers for Traxxas Slash 2WD XL-5 & VXL, Nitro Rustler, Nitro Stampede and Stampede 2WD (Rear) trucks. This set will give your truck the ultimate in performance and durability. Features: Custom 6mm...$3999 -
TRA3656
Traxxas Bigfoot #1 Chrome Grill Set
This is the Traxxas Bigfoot #1 Chrome Grill Set with decals. Whether your grill is damaged, or you're painting a new body to restore your monster to its original glory, this is the set you need for a perfect match and fit. Replacement chrome BIGFOOT No...$10 -
TRA3621X
Traxxas Blue Front Bumper, Mount, and Hardware for Stampede 2WD Series
This is the Traxxas Blue Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD$5 -
TRA1664
Traxxas Long Steel Shock Shafts w/Chrome Finish (2)
This is a pair of Traxxas Long Steel Shock Shafts with Chrome Finish. These are used in a large number of Traxxas vehicles. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part ForBandit VXLBanditBIGFOOT No...$3 -
TRA3691A
Traxxas Gearbox Halves, Grey: Rustler, Stampede, Slash
This is a Traxxas Left and Right Gearbox half with Idler Shaft for the Stampede, Rustler, and Slash vehicles. Features: Gray plastic construction Steel idler shaft Includes:One gearboxOne idler shaft$8 -
TRA3623X
Traxxas Blue Front & Rear Skid Plates for Stampede/Skully
These are the Traxxas Blue Front and Rear Skid Plates for the Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede VXL 2WDStampede XL-5 2WD$7 -
TRA2053
Traxxas Servo Gear Set for 2055 & 2056 Servos
This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.$4 -
TRA2575
Traxxas Buttonhead Screws 3x6mm (6)
This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...$250 -
TRA2662
Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear)
This is the Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear) Set of two XX-long Big Bore shocks provide ultimate dampening control. They’re formed from hard-anodized, PTFE-coated, aluminum with titanium-nitride (TiN) coated shafts for...$2695 -
GPM-RUS021-G
GPM Green Aluminum Steering Blocks fits 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Green Aluminum Steering Blocks for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, Bandit, and Nitro Slash vehicles. Made from 6061-T6 aluminum and anodized with a color finish, these are durable and look great.These are...$1590 -
TRA6850X
Traxxas Internal & External Splined Half Shafts & U-Joints
This is the Traxxas Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4). This is Traxxas part number 6850XPart Number: 6850X / TRA6850XFits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler...$8 -
TRA2530A
Traxxas Front Bulkhead (Grey): Nitro & Electric Rustler & Stampede, Slash
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES:Gray nylon construction INCLUDES:One front bulkhead REQUIRES:Nothing. This is a direct replacement...$6 -
GPM-RUS030-B
GPM Blue Aluminum Rear Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Blue Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, and Bandit vehicles. These are machined from 6061-T6 aluminum and anodized with a beautiful finish. Mounting hardware is also included.This...$1699 -
G3R-T1001-BLACK
Gen3 RC Black Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Black Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$5399 -
GPM-CRA030-R
GPM Red Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
HRASTE886
Hot Racing Hardened Steel 86T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Hardened Steel 86-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined and lightened hardened steel construction-...$1988 -
G3R-T3040
Gen3 RC Axle Wheel Bearing Kit for Traxxas 2WD Slash Rustler Stampede XL-5 & VXL
This is the Gen3 RC 8-Piece Rubber-Sealed Bearing Kit for Traxxas 1/10 Slash 2WD, Rustler 2WD, Stampede 2WD and Bandit VXL Axles.Features Super durable black rubber seals offer excellent protection against the harshest elements Pre-lubricated with...$829 -
GPM-CRA332F-OR
GPM Orange Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
GPM-CRA021-R
GPM Red Aluminum Steering Blocks for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Red Aluminum Steering Blocks for the Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Slash trucks.This is a direct replacement for Traxxas part 3736 steering blocks.Accessory Part ForTraxxas 1/10...$1399 -
TRA2753X
Traxxas Rear Stub Axles (2): Bandit, Stampede, Rustler, Slash
These are the Traxxas Rear Stub Axles for the Bandit, Stampede, Rustler, and Slash. Features: Metal construction, black and silver in color Includes: Two rear stub axles and pins Specifications:Length: 1.65" (42mm)Diameter: .51" (13mm) at...$5 -
TRA3652A
Traxxas Blue Aluminum Rear Stub Axle Carriers: Slash 2WD, Rustler, Stampede 2WD, Bandit
These are the Traxxas Blue Aluminum Rear Stub Axle Carriers with Bearings for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. These fit XL-5 and VXL versions of those vehicles.Traxxas aluminum stub axle carriers add both strength and...$2995 -
TRA3695
Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, Slash
This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks. This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...$7995 -
TRA3626R
Traxxas ESC/Receiver Box Mounting Plate for Installation of XL-5/VXL & Waterproof Receiver Box on Stampede 2WD
This is the Traxxas ESC/Receiver Box Mounting Plate for Installation of XL-5/VXL & Waterproof Receiver Box on Stampede 2WD. ESC mounting plate for 2WD Stampede models. Replacement part forBIGFOOT No. 1 Officially Licensed ReplicaStampede...$3 -
TRA2380
Traxxas Complete Differential for 1/10 2WD Rustler, Bandit, Stampede, Slash
This is the Traxxas Complete Differential for the electric 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks. This is a great option for a quick and easy diff replacement. Compatible With Bandit VXLBandit XL-5CraniacRustler VXL 2WDRustler XL-5...$1495 -
GPM-SLA2W028-GS
GPM Gunmetal Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Gunmetal Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
GPM-SLA2W028-G
GPM Green Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Green Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
G3R-T1001-ORANGE
Gen3 RC Orange Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Orange Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$5399 -
GPM-RUS003F-R
GPM Red Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Red Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
TRA3757T
Traxxas Blue Rear Springs (2) for XXL Shocks
This is a pair of Traxxas Blue Rear Springs for use on XXL Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD Unassembled KitSlash VXLSlashStampede 4X4 VXLStampede...$4 -
HRASSXS4680
Hot Racing Hardened Steel Pinion Gear Set - 24T 26T 28T 30T - 48P, 1/8 Bore
This is the Hot Racing Hardened Steel 48-Pitch 1/8" Bore Pinion Gear Set. This set includes a 24-tooth, 26-tooth, 28-tooth, and 30-tooth pinion gear.This set of gears is great for Traxxas Rustler XL-5, VXL, Stampede 2WD, Slash 2WD, HPI Savage XS, and...$1888 -
TRA3229
Traxxas 2.5x10mm Cap-Head Hex Machine Screws (6)
These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD...$250 -
RPM80332
RPM Black Snap-Tite RC Car & Truck Body Savers
This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...$229 -
TRA6868
Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2)
These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively stiffer rate to absorb hard landings...$650