Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
RPM80187RPM Pink Rear Suspension Arms for Stampede 2WD & Rustler
This is the RPM Pink Rear Suspension A-Arm Set for the Traxxas Rustler 2WD and Stampede 2WD vehicles. This includes one left and one right rear arm. These work on XL-5 brushed and VXL brushless versions. The arms work with all variations of the electric...$799 -
TRA3758XTraxxas White Front Springs (2) for Long Ultra Shocks
These are the Traxxas White Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis. Replacement Part ForHoss 4X4 VXLStampede 4X4 VXLStampede 4X4Stampede...$4 -
RPM73642RPM Replacement 0 & 3 Degree Rear Mounts for RPM Gearbox Housings
These are the RPM Replacement 0 and 3-Degree Rear Mounts for RPM Gearbox Housings. These are replacement 0-degree and 3-degree rear mounts for RPM #73612, #73614 & #73615 Gearbox Housings for Traxxas 1/10 scale 2wd vehicles. Each package contains 1 -...$679 -
HRATN2806Hot Racing Blue Aluminum Front Shock Tower for Slash 2WD, Stampede, Rustler, Bandit, Nitro Stampede
This is the Hot Racing Blue Aluminum Front Shock Tower for the Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Nitro Stampede. This will work on XL-5 brushed and VXL brushless versions of the vehicles listed.FEATURES:CNC machinedAnodized BlueYOU...$1888 -
HRATE22N06Hot Racing Blue Aluminum Stub Axle Carriers with Multi-Camber Link Mount for 2WD Slash, Rustler
These are the Hot Racing Blue 6061-T6 Aluminum Stub Axle Carriers with Multi-Camber Link Mount for Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit. This will work on XL-5 brushed and VXL brushless vehicles. It requires use of 5x11mm bearings. If...$1688 -
HRATE126M01Hot Racing Aluminum Battery Hold Down Plate Mount for Slash 2WD
This is the Hot Racing Aluminum Battery Hold Down Plate Mount for Traxxas Slash 2WD, Rustler, and Stampede 2WD trucks. Fix XL-5 brushed and VXL brushless versions of the trucks.FEATURES:CNC 6061 Aluminum constructionYOU WILL RECEIVE:One black anodized...$888 -
HRASTE875Hot Racing Hardened Steel 75T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Hardened Steel 75-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless vehicles with proper adjustment.FEATURES:- CNC machined and...$2488 -
HRASTE874Hot Racing Hardened Steel 74T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Hardened Steel 74-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless setups with proper gearing. Due to the gear being a smaller...$2488 -
HRASLF63FS261Hot Racing Rear Progressive 2 Spring Sets (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Rear Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Steel...$1288 -
HRASLF48RS286Hot Racing Front Progressive Rally Spec Springs (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Front Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, 1/10 Rally VXL, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these...$1288 -
HRASLF48MR268Hot Racing Front Spring Sets (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Front Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Spring Steel...$1049 -
HRASLF48FS261Hot Racing Front Progressive 2 Spring Sets (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Front Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles.FEATURES:Steel...$1288 -
HRANSG823Hot Racing 23-Tooth 48P Nitride Steel Pinion Gear 5mm & 1/8 Shafts
This is the Hot Racing 23-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, as well as...$888 -
HRANSG821Hot Racing 21-Tooth 48P Nitride Steel Pinion Gear 5mm & 1/8 Shafts
This is the Hot Racing 21-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, as well as...$1288 -
HRACSG1830Hot Racing 30-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 30-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...$588 -
HRACSG1829Hot Racing 29-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 29-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...$588 -
TRA6771Traxxas Tires and wheels, assembled, glued 2.8' (All-Star chrome wheels, Maxx tires, foam inserts) (2)
This is the Traxxas Tires and wheels, assembled, glued 2.8' (All-Star chrome wheels, Maxx tires, foam inserts) (2). Soft-compound 2.8″ Maxx chevron tires maximize performance and all-terrain traction. On dirt the chevron tread pattern claws for...$2995 -
TRA6770Traxxas Tires, Maxx 2.8' (2)/ foam inserts (2)
This is the Traxxas Tires, Maxx 2.8' (2)/ foam inserts (2). This is Traxxas part number 6770Part Number: 6770 / TRA6770FitsCraniacSkullyStampede 4x4 XL-5More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us...$1895 -
TRA6752Traxxas Half shaft, external splined (steel-spline constant-velocity) (1) (fits 2WD Rustler/Stampede)
This is the Traxxas Half shaft, external splined (steel-spline constant-velocity) (1) (fits 2WD Rustler/Stampede). This is Traxxas part number 6752Part Number: 6752 / TRA6752FitsCraniacRustler VXLRustler XL-5SkullyStampede VXL 2WDStampede XL-5 2WDMore...$8 -
TRA6751Traxxas Half shaft, internal splined (steel-spline constant-velocity) (1)
This is the Traxxas Half shaft, internal splined (steel-spline constant-velocity) (1)Replacement internal-spline half shaft for Traxxas steel CV driveshafts(1951R, 6851R, 6852R, 6451, and 6452). Replacement Part For:XO-1 Accessory Part For:BIGFOOTHoss...$6 -
TRA3738ATraxxas Blue Aluminum 49mm Rear Turnbuckle Camber Link
This is the Traxxas Blue Aluminum 49mm Rear Turnbuckle Camber Link, assembled with rod ends & hollow balls. Search our store for part 3741A for a complete camber link set.Fits1/10 Monster Jam TrucksBigfootCraniacRustler VXLRustler XL-5SkullyStampede VXL...$6 -
TRA3738Traxxas Red Aluminum 49mm Rear Turnbuckle Camber Link
This is the Traxxas Red Aluminum 49mm Rear Turnbuckle Camber Link, assembled with rod ends & hollow balls. Search our store for part 3741X for a complete camber link set.Fits1/10 Monster Jam TrucksBigfootCraniacRustler VXLRustler XL-5SkullyStampede VXL...$6 -
TRA3645Traxxas Toe-Link Turnbuckles 61mm (91mm to centers) for Stampede 2WD
This is a pair of Traxxas Toe-Link Turnbuckles (61mm turnbuckle, 96mm to centers of mounting holes) for the Traxxas Stampede 2WD trucks.FeaturesMetal and Nylon ConstructionSilver and Black in ColorAssembled w/Rod EndsIncludesTwo 61mm (96mm center to...$850 -
TRA3288Traxxas 3x15mm Washerhead Self-Tapping Screws (6)
These are Traxxas 3x15mm Washerhead Self-Tapping Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacSkullyStampede XL-5 2WD$150 -
TRA2765Traxxas X-Long Chrome Steel Shock Shafts (2)
These are the Traxxas X-Long Chrome Steel Shock Shafts. Each package includes two shock shafts.For use with X-Long shocks on:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler...$3 -
TRA2648Traxxas 3x12mm Countersunk Self-Tapping Screws (6)
These are the Traxxas 3x12mm Countersunk Self-Tapping Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacSkullyStampede XL-5 2WD$150 -
TRA2381XTraxxas 2381X Main Diff with Steel Ring Gear & Hardware
This is the Traxxas 2381X Main Diff with Steel Ring Gear, Side Cover Plate, and Screws.Fits:1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacRustler VXLRustler XL-5SkullySlash 2WD XL-5Slash 2WD VXLStampede VXL 2WDStampede XL-5 2WD$6 -
TRA1937Traxxas 54mm Turnbuckles w/3x6x4mm Spacers (rear camber links)
This is a pair of Traxxas 54mm Turnbuckles with 3x6x4mm aluminum spacers for use as rear camber links.Includes:2x 54mm threaded turnbuckles w/nut for easy adjustment2x 3x6 4.0mm thick aluminum spacersFits1/10 Monster Jam TrucksBandit XL-5CraniacMonster...$2 -
TRA6557Traxxas Telemetry Expander Mount: Stampede 2WD
This is the Traxxas Telemetry Expander Mount 6557 for the Electric Stampede 2WD. This part makes it possible to mount the #6550 Telemetry Expander Module on this vehicle.$8 -
TRA5859Traxxas Rear Springs, White (2): Slash Big Bore Shocks
These are the Rear Springs for use on the Traxxas Slash 2WD Short Course Racing TruckFeaturesSteel constructionProgressive rate dampingFits the Slash Big Bore shocksIncludesTwo Rear White SpringsSpecificationsLength: 71mm (2.8")Outer Diameter: 16.75mm (0...$8 -
TRA2563Traxxas 3x15mm Roundhead Screws (6)
These are the 3x15mm Roundhead Screws from Traxxas.FeaturesSteel constructionSilver in color IncludesSix 3x15mm Roundhead Screws SpecificationsLength: 15mm (0.59")Diameter: 3mm (0.12")$150 -
TRA4606Traxxas Ball Bearings 5x8x2.5mm (8)
This is a package of Traxxas 5mm x 8mm Bearings (8). Includes: Eight 5mm x 8mm Bearings Specifications:Height: 2.5mmInner Diameter: 5mmOuter Diameter: 8mm$24 -
TRA3745Traxxas 59mm Turnbuckle Toe Links (2): Rustler, Stampede, Bandit
These are the Traxxas 59mm Turnbuckle Toe Links for the Traxxas Rustler, Stampede, and Bandit. Features: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends Includes: Two 59mm (78mm center to center) turnbuckles$875 -
TRA3774Traxxas Rear Twin Spoke 2.8" Chrome Wheels (2): Jato 3.3
These are the Chrome Twin Spoke 2.8" Rear Wheels for the Traxxas Jato 3.3. FEATURES Nylon construction Chrome plated Ten spoke wheel pattern, spokes are in groups of two Uses 12mm hex adapter INCLUDESTwo Chrome Twin Spoke 2.8" Rear Wheels for...$795 -
TRA3342Traxxas Bullet Connectors, Male (3) VXL
These are the 3.5mm Male Bullet Connectors from Traxxas. FEATURES Gold plated INCLUDESThree male bullet connectors with heat shrink and instruction sheet REQUIRESSolder and soldering iron SPECSLength: .51" (13mm)Outside Diameter: .15" (4mm)$550 -
TRA2382Traxxas planet & Sungears, Shaft: N, NB, NRU,SLH
This is the Traxxas planet & Sungears, Shaft: N, NB, NRU,SLH Replacement hardened-steel internal gears for 2381X differential. Includes planetary gears (4), planetary shafts (4), sun gears (2), and alignment shaft.$6 -
TRA3669Traxxas Chrome Wheel w/Talon Tires Nitro Stampede/Rustler (Rear) or Electric Stampede/Rustler (Front)
These are a set of Traxxas 2.8" Talon Tires Mounted on All Star Wheels. These will fit the front of the electric Stampede 2WD and Rustler, Front & Rear of the Stampede 4x4, or the rear of the Nitro Stampede and Nitro Rustler trucks. Talon tires...$2595 -
TRA3668ATraxxas Rear All-Star Black Chrome Wheels w/ Talon Tires (2): Stampede VXL
This is a set of Rear Only 2.8" Mounted All Star Wheels and Tires for the electric Traxxas Stampede. FEATURES:2.8" All Star black chrome wheelsTalon tires with foam inserts INCLUDES:Two 2.8" mounted rear talon tires, All Star chrome wheels and foam...$2695 -
TRA4974Traxxas Wheelie Bar Arm: T-Maxx 3.3
This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES:4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't neededConstructed of hardened plastic, black in color INCLUDES:Wheelie Bar Arm with...$10 -
TRA4728Traxxas 28T Pinion Gear (48 Pitch): Slash 2WD
This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas Slash 2WD and other vehicles. FEATURES:Metal construction. INCLUDES:One Pinion GearOne Set Screw SPECS:Teeth: 28Pitch: 48$3