Slash Late Model

This is the Traxxas Slash Late Model 1/10 Ready-To-Race 2WD Dirt Oval Race Car with Waterproof Electronics, TQ 2.4 GHz 2-Channel Radio System, BL-2s Brushless Power System, and Clipless Painted Body. This Combo Includes:Traxxas Slash Late Model Brushless...

This is the Traxxas Slash Late Model 1/10 Ready-To-Race 2WD Dirt Oval Race Car with Waterproof Electronics, TQ 2.4 GHz 2-Channel Radio System, BL-2s Brushless Power System, and Clipless Painted Body. Battery and charger are sold separately. Competition...

This is the Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger. It will charge two 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard LiPo or NiMH with Traxxas high-current connectors. Charge...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD LiPo and NiMH Charger. It will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4-Amp charger works with the Traxxas iD style battery plugs, as well as the Traxxas high-current plug. It...

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As with other EZ Peak iD chargers, these are compatible with...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is the Traxxas 2970-2SR EZ-Peak ID 4-Amp Auto-iD NiMH/LiPo Charger & 2S 5200mAh Hardcase LiPo Battery Completer EZ-Peak CompleterThe 2s LiPo hard case completer pack includes a 2844R 2-cell 5200 mAh 7.4 volt LiPo battery and a 2970 EZ-Peak 4-amp...

This is a 2 pack of 5X11mm Ball Bearings  Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. FEATURES:Metal bearing constructionBlue rubber dirt...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most advanced charger ever from Traxxas!Traxxas iD...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5m

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20 PTFE-coated 5x8x0.5 mm...

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...

This is a set of Traxxas Rod ends (12)/ hollow balls (12) Set of twelve rod ends come assembled with hollow balls. Replacement Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord F-150 Raptor R 4X4Hoss 4X4...

This is the Traxxas Complete Differential Assembly with Grease This pre-assembled differential is ready-to-install in any Magnum 272R transmission. The sealed differential comes filled with grease for smooth hard-charging action. The differential will...

This is the Traxxas Slash Modified Body Completer Kit Body completer kit for 10411-series Slash Modified bodies. Accessory Part ForSlash Late Model BL-2sSlash Modified BL-2s

This is the Traxxas Slash Modified Driver Body Cage Body Cage, Driver/ Retainers (3) Fits: #10411 Body Accessory Part ForSlash Late Model BL-2sSlash Modified BL-2s

This is the Traxxas Front and Rear Clipless Body Latches Replacement front and rear clipless body latches for 10411-series Slash Modified bodies. Accessory Part ForSlash Late Model BL-2sSlash Modified BL-2s

This is the Traxxas Extreme Heavy-Duty Steel CV Driveshaft Rebuild Kit Rebuild your Traxxas extreme-duty steel CV driveshafts with this kit. Each kit contains the pins and hardware to rebuild one driveshaft. Fits: TRA9051X and TRA9052X

This is the Hobbywing Xerun XR10 Justock G3S, JS4 13.5T G2.1 Motor Combo Best used for: 1/10, 1/12 On-road and Off-road Club competition and Normal Training. Features The timing has been permanently set to 0 degree. With the identical competition motor,...

This is the GPM 4140 Carbon Steel Shoulder Screws 3x12mm (6) Made by 4140 carbon steel, Set of six 3x12mm shoulder screws (shock attachment screws) with hex-drive heads Replaces Stock Part # 3642X IncludesShoulder Screws 3x12 mm - 6PCS  

This is the Traxxas GTR Springs (1.2-Rate Silver Stripe) (2) GTR shock springs use high-quality spring steel with a durable white powder-coated finish. GTR springs are offered in different rates to tune your suspension performance or compensate for...