Traxxas Rustler 2WD XL 5 VXL
Traxxas Rustler
The Traxxas Rustler is a great option for when you want a powerful radio-controlled (RC) model to start with. Notice how we specifically refer to powerful RC vehicles; while you can get started with more casual models that you can pilot around the house, the Traxxas Rustler XL-5 line of entry-level RC monster trucks is part of a ready-to-run (RTR) package that can get you out of the house and onto off-road surfaces such as dirt, sand, mud, and even puddles.
The waterproof electronics of the Rustler ensure you can take it out on just about any day of the year, and it will even survive the occasional rain or snowstorm. Fear no slush or shallow creeks. You own the road, the track, and any stray mud that splatters your way.
Our Monster Truck Recommendations
Let’s review some of the Rustler models and parts available from the RC Superstore:
Traxxas Rustler XL-5
The Traxxas Rustler XL-5 RTR RC Truck w/ID Battery & Quick Charger is one of the best starting vehicles in the RC hobby. There was a time when drivers started off with RC models to run on smooth surfaces before moving to outdoor surfaces, but this was when RC monster trucks required a considerable investment plus many hours on the workbench. The Rustler is a full RTR vehicle, which means that it is geared towards beginners who wish to get their wheels dirty right out of the box.
The battery pack has an ID connector, making it safe and easy to use. We love it for families because kids can easily learn the ropes with radio control despite the higher performance of this model. You can drive at up to thirty-five miles per hour with confidence because of the quality speed control. Want to let a beginner drive? Put it in the Traxxas-exclusive Training Mode for lower speeds while they learn.
Traxxas Rustler VXL
Another option is the Traxxas Rustler VXL Brushless RTR RC Truck that can go above seventy miles per hour with the included high-speed gears and our 3S LiPo Combo Package. The Traxxas Stability Management is meant to help you navigate loose and slippery surfaces so that you maintain control in the heat of the moment. A brushless motor ensures that you have low maintenance and you are equipped for extreme performance and speed.
EZ-Peak Dual Battery Charger
When you need a good battery charger, we have just the one for you. The Traxxas EZ-Peak Dual iD NiMH & LiPo Battery Charger will power up your iD batteries while ensuring that you can keep your vehicle on the road for a good long while. You just simply need to plug in two batteries and hit the switch, while checking the progress bar as it charges. It also makes a great gift for any Traxxas fan so that they can maintain their batteries as well, so wrap it up for any occasion.
Ready To Race
The best part of the Traxxas Rustler is that it is great for any beginner. It is a ready-to-run or RTR vehicle, which means that no assembly is required. You simply need to add some batteries or charge yours, and the truck will be good to go in the mud. All it takes is a quick charge and you’re ready to race, whether at the track or in your backyard.
A Traxxas Rustler is also built for speed and strength on a budget. When you want to get started on racecourses to test your skills with the radio, then you should get a Rustler and see what you can do. If racing the Rustler VXL, check out the ESC cooling fan designed to prevent excess overheating, so that you can drive for hours on end. Modifying your Rustler with parts and accessories is easy; all you need is to select the right item from our catalog and use a toolkit for RC models.
Find Your Monster and Stadium Trucks at RC Superstore
When you are ready to take your RC hobby to the next level, we suggest you advance from stadium trucks to monster trucks such as those in the rest of the Traxxas 4×4 lineup. RC Superstore wants to get you on the road to show off your skills. You can hit the ground running with our cars, trucks, boats and more. All you need is the starting model, and parts if you want to perform some upgrades. Contact us today to get your first RC vehicle or advice on how to make upgrades. You will be thrilled to see how well you master the road, and how to handle the muddiest days. Traxxas will always be the way to go.
-
HRAESC303T06Hot Racing Traxxas VXL-3s ESC Aluminum Heat Sink & High Velocity Fan
This is the Hot Racing Traxxas VXL-3s ESC Aluminum Heat Sink and High Velocity Fan. This is a great upgrade for all Traxxas VXL brushless vehicles, including the Slash 2WD VXL, Slash 4x4, Stampede 4x4 VXL, Stampede 2WD VXL, Rustler VXL, and Bandit VXL...$2349 -
HRATRX15GPL06
Hot Racing Power Up Slipper Eliminator for Slash 2WD & 4x4, Stampede 2WD & 4x4, Rustler, Bandit
This is the Hot Racing Power Up Slipper Eliminator for Traxxas Slash 2WD & 4x4, Stampede 2WD & 4x4, Rustler, Bandit, 1/10 Rally VXL, and Jato 3.3. This will work on the XL-5 brushed and VXL brushless versions of the electric trucks.FEATURES:- Eliminates...$1588 -
HRATRX15GSL
Hot Racing Carbon Fiber Long Slipper Clutch Pads - Use in place of Traxxas 5352 or 5552
These are the Hot Racing Carbon Fiber Long Slipper Clutch Pads with 25% more surface area than stock pads, for use in place of Traxxas 5352 or 5552 pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash...$888 -
HRATRX15GX06
Hot Racing Small Super Duty Slipper for Slash, Stampede, Rustler, Bandit, Jato
This is the Hot Racing Small Super Duty Slipper System with Pressure Plate, Hub, and Friction Pad for Slash 2WD, Slash 4x4*, Stampede 2WD, Rustler, Bandit, 1/10 Rally VXL*, Jato 3.3, and Stampede 4x4*. This will work on XL-5 brushed and VXL brushless...$2888 -
HRATE890H
Hot Racing 90T 48P Aluminum Spur Gear for Traxxas Stampede 2WD
This is the Hot Racing 90-Tooth 48-Pitch Hard Anodized Aluminum Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit. It will work with XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined 6061-T6 aluminum construction- Replaces...$2388 -
HRASTE250
Hot Racing Hardened Steel 50T 0.8 Mod 32P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Hardened Steel 50-Tooth 0.8 Mod 32-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This gear is significantly smaller than stock, which will increase top speed over stock. It will...$2488 -
MIP18140
MIP X-Duty Rear CVD Drive Kit for Slash/Stampede 4x4, Stampede/Rustler VXL
This is the MIP X-Duty Rear CVD Drive Kit for the 1/10 Slash 4x4, Stampede 4x4, Rally VXL, Stampede VXL 2WD and Rustler VXL 2WD, Nitro Stampede, and Nitro Rustler.Includes2 - MIP Confetti Sticker, 2.185 x .65 Black1 - MIP Lube & Thread Gel Cup1 - MIP...$5699 -
HRATE48G01
Hot Racing Aluminum & Carbon Steering Bellcrank for 2WD Slash, Rustler, Bandit
This is the Hot Racing Aluminum and Carbon Fiber Steering Bellcrank for Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless vehicles. It replaces Traxxas part 3743.FEATURES:- CNC machined 6061...$2449 -
HRASTE886
Hot Racing Hardened Steel 86T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Hardened Steel 86-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined and lightened hardened steel construction-...$1898 -
HRASSXS4680
Hot Racing Hardened Steel Pinion Gear Set - 24T 26T 28T 30T - 48P, 1/8 Bore
This is the Hot Racing Hardened Steel 48-Pitch 1/8" Bore Pinion Gear Set. This set includes a 24-tooth, 26-tooth, 28-tooth, and 30-tooth pinion gear.This set of gears is great for Traxxas Rustler XL-5, VXL, Stampede 2WD, Slash 2WD, HPI Savage XS, and...$1888 -
HRACSG1827
Hot Racing 27-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...$544 -
HRATD100X06
Hot Racing Aluminum 100mm HD Big Bore Rear Shocks for Slash, Stampede, Rustler
These are the Hot Racing Blue Aluminum 100mm HD Big Bore Rear Shocks for Slash 2WD, Slash 4x4, Stampede 2WD & 4x4, Rustler, Bandit, T-Maxx and E-Maxx front/rear, Associated SC10, and many other vehicles that can use 100mm shocks. These are also a great...$2849 -
HRATE892H
Hot Racing 92T 48P Aluminum Spur Gear for Traxxas 2WD Slash, Stampede, Rustler, Bandit
This is the Hot Racing 92-Tooth 48-Pitch Hard Anodized Aluminum Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit. It will work with XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined 6061-T6 aluminum construction- Replaces...$2388 -
HRANSG820
Hot Racing 20-Tooth 48P Nitride Steel Pinion Gear 5mm & 1/8 Shafts
This is the Hot Racing 20-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, as well as...$1288 -
HRATE48X01
Hot Racing Aluminum Servo Saver Bellcrank for 2WD Slash Rustler Bandit
This is the Hot Racing Adjustable Aluminum Servo Saver Steering Bellcrank for the Traxxas 2WD Slash, Rustler, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless versions.FEATURES:- Super-tough, fully adjustable servo saver bell crank-...$4688 -
HRASTE90MR128
Hot Racing Front Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Front Multi-Rate Springs (3 Pairs) for Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will work on the XL-5 brushed and VXL brushless trucks.FEATURES:Spring Steel ConstructionMulti-Rate Springs, Dual-Rate (DRS) allow...$1488 -
HRATRX15EP
Hot Racing HD Aluminum Slipper Plate & Hub for Stampede, Slash, Rustler, Bandit, Jato
This is the Hot Racing HD CNC Machined Hard Anodized Aluminum Slipper Plate and Hub for the 1/10 Traxxas Bandit, Jato 3.3, Rally*, Rustler, Slash 2WD, Slash 4X4*, Stampede 2WD, and Stampede 4X4*. This item is a replacement for Traxxas 5556.*For high...$1488 -
HRASTE100MR128
Hot Racing Rear Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Rear Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler. These work on the rear of the XL-5 brushed and VXL brushless versions of these trucks.FEATURES:- Spring steel construction- Multi-rate springs allow the...$1388 -
HRACSG1831
Hot Racing 31-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...$788 -
HRATE1006SL
Hot Racing Blue Aluminum 12mm Clamping Wheel Hexes for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Blue Aluminum 12mm Clamping Wheel Hexes for the front and rear of Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will fit XL-5 brushed and VXL brushless versions.FEATURES:- CNC machined aluminum, anodized blue-...$1688 -
HRASSXS8024
Hot Racing Chrome Steel Pinion Gear Set - 28T 30T 32T 34T - 48P, 1/8 Bore
This is the Hot Racing Chrome Steel Speed Tune 48-Pitch 1/8" Bore Pinion Gear Set. The set includes a 28-tooth, 30-tooth, 32-tooth, and 34-tooth pinion gear.Designed for use with stock HPI Savage XS idler gear. Also works on Traxxas vehicles requiring...$1888 -
HRACSG1826
Hot Racing 26-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 26-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...$544 -
HRASTE872
Hot Racing Hardened Steel 72T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Lightweight Hardened Steel 72-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This will fit XL-5 brushed and VXL brushless trucks. A larger pinion gear will be required on...$2488 -
HRASLF63RS286
Hot Racing Rear Progressive Rally Spec Springs (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Rear Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles...$1288 -
HRATN2806
Hot Racing Blue Aluminum Front Shock Tower for Slash 2WD, Stampede, Rustler, Bandit, Nitro Stampede
This is the Hot Racing Blue Aluminum Front Shock Tower for the Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Nitro Stampede. This will work on XL-5 brushed and VXL brushless versions of the vehicles listed.FEATURES:CNC machinedAnodized BlueYOU...$1888 -
HRATE22N06
Hot Racing Blue Aluminum Stub Axle Carriers with Multi-Camber Link Mount for 2WD Slash, Rustler
These are the Hot Racing Blue 6061-T6 Aluminum Stub Axle Carriers with Multi-Camber Link Mount for Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit. This will work on XL-5 brushed and VXL brushless vehicles. It requires use of 5x11mm bearings. If...$1688 -
HRATE126M01
Hot Racing Aluminum Battery Hold Down Plate Mount for Slash 2WD
This is the Hot Racing Aluminum Battery Hold Down Plate Mount for Traxxas Slash 2WD, Rustler, and Stampede 2WD trucks. Fix XL-5 brushed and VXL brushless versions of the trucks.FEATURES:CNC 6061 Aluminum constructionYOU WILL RECEIVE:One black anodized...$888 -
HRASTE875
Hot Racing Hardened Steel 75T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Hardened Steel 75-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless vehicles with proper adjustment.FEATURES:- CNC machined and...$2488 -
HRASTE874
Hot Racing Hardened Steel 74T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Hardened Steel 74-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless setups with proper gearing. Due to the gear being a smaller...$2488 -
HRASLF63FS261
Hot Racing Rear Progressive 2 Spring Sets (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Rear Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Steel...$1288 -
HRASLF48RS286
Hot Racing Front Progressive Rally Spec Springs (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Front Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, 1/10 Rally VXL, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these...$1288 -
HRASLF48MR268
Hot Racing Front Spring Sets (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Front Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Spring Steel...$1049 -
HRASLF48FS261
Hot Racing Front Progressive 2 Spring Sets (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Front Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles.FEATURES:Steel...$1288 -
HRANSG823
Hot Racing 23-Tooth 48P Nitride Steel Pinion Gear 5mm & 1/8 Shafts
This is the Hot Racing 23-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, as well as...$888 -
HRANSG821
Hot Racing 21-Tooth 48P Nitride Steel Pinion Gear 5mm & 1/8 Shafts
This is the Hot Racing 21-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, as well as...$1288 -
HRACSG1830
Hot Racing 30-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 30-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...$588 -
HRACSG1829
Hot Racing 29-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 29-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...$588
