Pro Scale Sand Car

Included in the Combo is the Traxxas Pro Scale X-Series 8S Brushless Ready-to-Race Sand Car with TWO 4S 6700mAh batteries and the EZ-Peak Live ID DUAL OUTPUT quick charger. This is the Traxxas Pro Scale X-Series Brushless Ready-To-Race Waterproof Radio...

This is the Traxxas Pro Scale X-Series Brushless Ready-To-Race Waterproof Radio Controlled Sand Car with TQi 2.4 GHz Radio System, VXL-8s Brushless Power System, High Visibility Whip Lights, and Replica Funco Clipless Body. King Of The DunesDriving a...

This is the Traxxas EZ-Peak Live Dual ID Charger and two 4S 6700mAh LiPo Batteries for X-Maxx 8S trucks. This completer combo is the perfect complement to your X-Maxx 8S monster truck. The pack includes two 4-cell 6700mAh iD LiPo battery packs for 50+mph...

This is the Traxxas 14.8V 4S 6700mAh LiPo with ID Connector for use in the X-Maxx 8S trucks, or in the Unlimited Desert Racer for 4S power. 4S - 14.8 Volts 25C Sustained 50C Burst 3C ChargeTraxxas takes battery power for your X-Maxx to the next level...

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As with other EZ Peak iD chargers, these are compatible with...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is a 2 pack of 5X11mm Ball Bearings  Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. FEATURES:Metal bearing constructionBlue rubber dirt...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most advanced charger ever from Traxxas!Traxxas iD...

This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES:1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS:Length: 11"Outside Diameter: 1/8"

This is the Traxxas TQi 2.4GHz 5-Channel Micro Receiver with Telemetry and TSM The 6533 TQi 2.4 GHz receiver stores up to thirty Traxxas Link enabled transmitters in memory. Integrated telemetry ports allow real-time data to transmit from your Traxxas...

This is the Traxxas TQi 2.4 GHz High Output 2-Channel Radio System with Traxxas Link Enabled and TSM 2-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6509R

This is the Traxxas TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link Bluetooth module and TSM 4-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6507R

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions,...

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shielded with blue rubber seals Includes: Two Ball Bearings Specifications:Inner Diameter: 10mmOuter Diameter: 15mmSide...

This is the Traxxas Digital High-Torque/High-Speed Metal Gear (Ball Bearing) Waterproof Servo Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof Replaces Servo #TRA2085R Accessory Part ForMaxx w/WideMAXXMaxx SlashPro Scale Sand...

This is a set of four Traxxas 17mm Splined Serrated red-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets...

This is a pair of Traxxas 15x24x5mm Black Rubber-Sealed Ball Bearings.  Pair of 15x24x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance...

This is a pair of Traxxas 17x26x5mm Black Rubber-Sealed Ball Bearings. These are used in the X-Maxx trucks.Features Steel construction with black rubber seals Used in the front and rear differentials of the X-Maxx Includes: Two 17 x 26 x 5mm Black...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...

This is a set of four Traxxas 17mm Splined Serrated orange-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas 20x32x7mm Black Rubber Sealed Ball Bearings (2). Pair of 20x32x7 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas 8x16x5mm Black Rubber Sealed Ball Bearings (2). Pair of 8x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas 12x21x5mm Black Rubber Sealed Ball Bearings (2). Pair of 12x21x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

These are the Traxxas 6x13x5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate...

This is the Traxxas Pro Scale Sand Car LED Rock Light Kit Light up your Pro Scale Sand Car with this LED rock light kit. Lights mount to the shock body with collars for easy installation. Includes: Collars, Wiring Harness, and Mounting Hardware...

This is the Traxxas Pro Scale Sand Car Complete LED Light Kit Funco Sand Car Complete Pro Scale LED light set. Includes: Front Light Bar, Rear Light Bar, Side Lights (Left & Right), and High-Voltage Power Amplifier Accessory Part ForPro Scale Sand Car

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...

This is the Traxxas Pro Scale Sand Car Red Underbody LED Light Kit Give your Pro Scale Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Includes: 3-Volt Power Supply,...

This is the Traxxas Pro Scale Sand Car Orange Underbody LED Light Kit Give your Pro Scale Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Includes: 3-Volt Power...

This is the Traxxas Pro Scale Sand Car Green Underbody LED Light Kit Give your Pro Scale Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Includes: 3-Volt Power...

This is the Traxxas Pro Scale Sand Car Blue Underbody LED Light Kit Give your Pro Scale Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Includes: 3-Volt Power Supply,...

This is a set of two (2) Traxxas 4mm x 7mm x 2.5mm Blue Rubber Shielded Ball Bearings.  These are factory replacements.  These fit several Traxxas models. Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal...

This is a set of four Traxxas 17mm Splined Serrated Green Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas 2085XL Digital High-Torque Metal Gear (Ball Bearing) Waterproof Servo Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link Servo requires Maxx mount found in Maxx and X-Series vehicles...

This is the GPM 20crmnti Steel 20-Tooth Transmission Idler Gear Made of high-quality 20CrMnTi material, hardened and blackened to enhance wear resistance; module: M1.5, number of teeth: 20T, all parameters are consistent with the original factory data,...

This is the GPM 220crmnti Steel 32-tooth Heavy-duty Differential Gear Made of high-quality 20CrMnTi material, hardened and blackened to enhance wear resistance; module: M1.5, number of teeth: 32T, all parameters are consistent with the original factory...

This is the RC Screwz Traxxas Pro Scale Sand Car (109076-4) Rubber Shielded Bearing Kit Rubber Shielded Bearing Kit Features: High Quality Rubber Shielded Bearings Includes all bearings (Standard, Flanged, One-Way & Thrust if needed) Rubber shielded...

This is the RC Screwz Traxxas Pro Scale X-Series Sand Car (109076-4) Stainless Steel Screw Kit RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include...