Nitro Sport

This is the Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger. It will charge two 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard LiPo or NiMH with Traxxas high-current connectors. Charge...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD LiPo and NiMH Charger. It will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4-Amp charger works with the Traxxas iD style battery plugs, as well as the Traxxas high-current plug. It...

This is a quart of Traxxas Top Fuel 20% Nitro Radio Controlled Car and Truck Engine Fuel. Traxxas Fuels are Perfectly Blended with high quality ingredients to give your Engine Easier Starts, Faster Runs, and longer life.This item ships only to the 48...

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As with other EZ Peak iD chargers, these are compatible with...

This is the Traxxas Super Duty Long Glowplug. FEATURES:Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 enginesSuited for the varied throttle range of off-road racingMedium heat range INCLUDES:One Traxxas Medium Heat Range Super Duty Long...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is a 2 pack of 5X11mm Ball Bearings  Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. FEATURES:Metal bearing constructionBlue rubber dirt...

This is the Traxxas Speed Bit 7-Piece Metric Hex and Nut Driver Essentials Set with 1/4" drive Premium Handle and Travel Pouch. Set Includes:Straight Hex Drivers: 1.5mm, 2.0mm, 2.5mmNut Drivers: 5.0mm, 5.5mm, 7.0mm, 8.0mmPremium handle (1/4" drive)Travel...

This is the Traxxas Speed Bit Master Set Metric 7-Piece Straight and Ball End Hex Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:Premium handle (1/4" drive)Travel pouchStraight Hex Drivers: 1.5mm, 2.0mm, 2.5mm, 3.0mmBall End Hex...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most advanced charger ever from Traxxas!Traxxas iD...

This is the Traxxas Speed Bit Master Set Metric 6-Piece Nut Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:4.0 mm Nut Driver4.5 mm Nut Driver5.0 mm Nut Driver5.5 mm Nut Driver7.0 mm Nut Driver8.0 mm Nut DriverPremium handle...

This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES:1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS:Length: 11"Outside Diameter: 1/8"

This is the Traxxas Speed Bit 3-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, and 2.5mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Link Bluetooth Wireless Module for use with TQi radio systems having the a TQi logo with the blue letter "i" on the face. The wireless module works with Android (v4.4 OS and higher), iPhone (4S and newer), iPod touch (5th generation...

This is Traxxas Ultra Premium RC Tire Glue. Only one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of...

This is the Traxxas Phone Mount for Traxxas TQi and Aton Transmitters. The Transmitter Phone Mount provides a secure mounting base for your mobile device when using it for the Traxxas app.

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas 1800mAh 7.2V 6-Cell NiMH Battery with Standard Tamiya Plug. This is used in Traxxas EZ-Start Systems with nitro vehicles. This works with the EZ-Start 1 and 2. Traxxas Power Cell NiMH battery packs provide excellent...

This is the Traxxas Stub Axle Pins and Hex Wheel Hubs Includes(2) 12 mm Composite hex wheel hubs (2) Axle pins Replacement Part ForBIGFOOTDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLJatoNitro RustlerNitro SlashRustler 4X4 VXLRustler...

This is the Traxxas 2075 Digital High-Torque Waterproof Servo. This servo puts out 125 oz/in of torque at 6V. This is a stock replacement for many vehicles, and can also be used as an upgrade to the 2056 servo found in some models.Specifications125 oz-in...

This is the Traxxas Male Battery Connector Set (2).  These are for use as an ESC connector. Note: 4S Traxxas ID batteries are not compatible with these connectors due to the connector shape.

This is a Traxxas Large Servo Saver for Futaba, Hitec, Airtronics, and Traxxas servos. This will work on most vehicles requiring a large servo saver. The servo saver protects your steering servo by absorbing shocks that might otherwise cause internal...

This is set of Traxxas Rod Ends (16 long & 4 short) with 18 hollow balls and two ball screws. These are used on most Traxxas vehicles.Includes:4 short rod ends (17mm)16 long rod ends (19mm)2 ball screws18 hollow ball connectors Replacement Part...

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of oil flow in the shock cylinder. FEATURES:Constructed of...

This is a Traxxas Glow Plug Wire Lead for all Traxxas EZ-Start 1 and 2 equipped vehicles.  It fits the T-Maxx .15, 2.5, 3.3, Revo, Jato, 4-Tec, Rustler, Stampede and all other vehicles equiped with the EZ-Start system.  It...

This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof...

This is a set of four Traxxas Blue-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange...

This is the Traxxas Receiver Switch Harness with Charge Jack for Traxxas Nitro vehicles like the T-Maxx 2.5 and 3.3, Nitro 4-Tec, Nitro Rustler, and Nitro Stampede.FitsNitro 4-TecNitro RustlerNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2...

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated construction SPECSOutside diameter: 7mm Replacement Part...

This is the Traxxas Big Bore Shock Set for all 1/10 Scale Slash 2WD, Slash VXL, and Slash 4x4 Short-Course Trucks. These replace the plastic shocks that come stock with the truck. Big Bore shocks provide optimal bump and jump control for your Traxxas...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5m

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks. Includes:One 70 tooth gear Features:Tough nylon constructionDrilled for light weight Specs:Teeth-70Pitch-32 Requires:Nothing, this is a direct replacement part. Comments:This is...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20 PTFE-coated 5x8x0.5 mm...

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet...

This is the Replacement 72 Spur Gear for the Traxxas Nitro Rustler and Nitro T-Maxx Trucks. FEATURES:Black plastic, slipper clutch style spur gear. INCLUDES:One 72 tooth spur gear REQUIRES:The other parts of that make up the slipper clutch are:#TRA1994 -...