Nitro Rustler

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES:Two hardened steel yokes...

This is a pair of 2.8" Twin-Spoke Rear Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are stock replacement wheels.FEATURES: Nylon constructionChrome platedFive split spoke wheel patternUses 12mm hex adapterINCLUDES: Two Rear Chrome Wheels

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system. SPECS:Length: 6mm (0.24")

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included are one piston, one...

This is the Traxxas Universal Glow Plug Wrench Glow plug wrench (Universal wrench) Accessory Part ForJato 3.3Nitro RustlerNitro SlashRevo 3.3 Slayer Pro 4x4T-Maxx 3.3T-Maxx Classis

This is the Traxxas Nitro 4-Tec Pro Decal Sheet Sheet of pre-cut adhesive Nitro 4-Tec decals

This is the Traxxas Front Bulkhead (Black) Replacement black composite front bulkhead Replacement Part ForBIGFOOT No. 1 Officially Licensed ReplicaBigfoot Officially Licensed ReplicaDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Replacement EZ-Start 2 Housing Set with Hardware and Motor Bushing. Includes(5) 3x12 mm screws (1) 3x20 mm screwMotor Bushing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

This is the Traxxas Assembled Tuned Pipe Tuned pipe comes assembled and ready to install on Nitro Rustler, Nitro Sport, and Nitro 4-Tec with TRX 2.5 engine. *For TRX 2.5 - Requires Coupler Part #5246*For Pro.15 - Requires Coupler Part #4451 Replacement...

This is the Hot Racing Aluminum 90mm Heavy Duty Big Bore Shocks (2pcs) 90mm big bore threaded body aluminum shocks for many 1/10th scale off-road vehicles using 90mm shocks. Some applications include, but are not limited to: Traxxas Bandit front, Nitro...

These are the Traxxas XX-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shocks shafts. These XX-long hardened steel shafts have a super tough titanium nitride coating with a micro-polished finish for smoother...

This is a pair of Traxxas Front White Springs. These fit the front long Ultra Shocks (3760A) on many Traxxas vehicles.Fits:Bandit VXLBandit XL-5Nitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler XL-5Slash 2WD VXLSlash 2WD XL-5

These are the Traxxas Hardened Steel Titanium-Nitride Coated Shock Shafts. These are an excellent upgrade for many Traxxas vehicles.Includes: Two shaftsSpecificationsDiameter: 3mm (0.118")Length: 47 mm (1.85")Thread: 3mm (0.118") Accessory Part ForHoss...

This is the RPM Black Front Shock Tower for the Traxxas Nitro Slash, Nitro Rustler, and Nitro Sport trucks.RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great...

This is the RPM Blue Front Suspension A-Arm Set for the Electric Bandit, Nitro Rustler, Nitro Stampede, and Nitro Sport vehicles.RPM Rear A-arms for the Traxxas Bandit, Nitro Rustler, Nitro Stampede, and Nitro Sport are finally here to strengthen the...

This is a pair of Traxxas 2.2" Rear Lite Truck Wheels (white) for the Jato trucks, as well as the electric Rustler and electric Stampede.  These are 2.2-inches in diameter, have a 12mm hex, and require 2.2" tires. ...

This is the Traxxas Rubber Exhaust pipe Rubber exhaust pipe for Nitro Rustler, Nitro Sport, and Nitro 4-Tec. (Side Exhaust Engines Only) Replacement Part ForTRX Pro .15Nitro Rustler Nitro Sport Nitro 4-Tec

This is the Traxxas aluminum (Red Anodized Shock Caps Shock caps, aluminum (Red-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps...

These are the Traxxas Flanged and Serrated Nuts, Aluminum (4mm) (Orange-Anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking...

These are the Traxxas X-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shock shafts.For use with X-Long shocks on:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro...

This is the Traxxas aluminum (Orange Anodized Shock Caps Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...

These are the Traxxas Stainless Steel Suspension Hinge Pins with E-Clips. This set fits the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:48mm Rear inner hinge pin (2)31.5mm Front and rear outer hinge pin (4)39mm Front...

This is a pair of Traxxas All-Star 2.8" Black Chrome Wheels for use on the front of 2WD electric trucks, front and rear of electric 4x4, and the rear of nitro 2WD trucks.SpecificationsOverall Diameter: 2.8" (71mm)Width: 1.92" (49mm)Includes: Two...

This is the Replacement Complete Gear Set for the EZ Start 2 System. The EZ Start 2 system is used on the Traxxas T-Maxx 2.5. FEATURES:White plastic gears INCLUDES:Eight different gearsOne metal 4mm sleeveOne 5x12.5mm shaft REQUIRES:The remainder of the...

This is the Traxxas Fuel Filler Bottle (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and O-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are...

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker...

This is the Traxxas Premium Speed Bit Handle (Rubber Overmold) The premium speed bit handle holds bits securely with an overmolded rubber grip to provide excellent comfort and more wrenching torque.

This is the Traxxas Body Ultra Shock (XXL) (Grey) (2) XX-Long Ultra Shock composite bodies (2) Replacement Part ForBandit VXLBanditDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord F-150 Raptor R 4X4Ford Fiesta ST...

This is the Traxxas Body Ultra Shock (Long) (Grey) (2) Long Ultra Shock composite bodies (2) Replacement Part ForBandit VXLBanditDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord F-150 Raptor R 4X4Ford Fiesta ST...

This is the Traxxas Aluminum Shock Caps (2) (Big Bore Shocks) Replacement aluminum shock caps for Traxxas Big Bore shocks. (2) Caps do not fit Ultra Shocks. Accessory Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Traxxas Big Bore Shock Cylinder (Long) (1) Replacement long aluminum shock cylinder for Traxxas Big Bore Shocks. Accessory Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford...

This is the Traxxas Spinning Carousel Rack Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.

This is the Traxxas RC Car/Truck Carrier Backpack Features Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Zippered Front Pockets for Tools and Parts Four-Compartment Battery Organizers Thick Padded Sidewalls Large Side...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...

This is the Traxxas Shoulder Strap for the #9917 Duffle Bag Add additional carrying support with the strap for your RC Car/Truck Duffle Bag Features Heavy Duty Shoulder Strap for Fuffel Bag with Metal Latches Padded Sleeve For Added Comfort Adjustable...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix, TRX engines and www.Traxxas.com logos. Perfect for adding...

This is the Dynamite .19T Mach 2 Replacement Engine for Traxxas Vehicles The Dynamite Mach 2 .19T Traxxas Replacement Engine is the perfect complement for Traxxas nitro vehicles in need of a new powerplant. With no modifications needed for installation,...

This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3" (76.2mm) of open...

This is the GPM Racing Black Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

This is the Traxxas Flywheel Nut for the TRX 2.5, 2.5R, and 3.3 nitro engines.Fits:Jato 2.5Jato 3.3Nitro Rustler 2.5Nitro SlashRevo 3.3SlayerSlayer ProS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3