Traxxas

This is the Traxxas 24-Tooth 48-Pitch Pinion Gear with Set Screw. This can be used with the the 4-Tec 2.0, or any other vehicle requiring a 24T 48-pitch pinion gear.Fits4-Tec 2.0

This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes...

This is a set of six Traxxas Wheel Hex Clips for the X-Maxx monster truck.FeaturesSteel constructionSnaps onto groove of each stub axle to hold wheel hub and uprights in placeIncludes: Six Wheel Hex...

This is the Traxxas Driveshaft Assembly, Front/Rear.Set of two driveshaft assemblies Fit: Front or RearReplacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas Blue Aluminum Header for Rear Exhaust TRX 2.5, 2.5R, and 3.3 Engines on the Nitro 4-Tec, Nitro Rustler, and Nitro Slash trucks.FitsNitro RustlerNitro SlashTRX 2.5RTRX 3.3

This is the Traxxas Transmission Gear Dust Cover Set with Screws for the Bandit, Rustler, Slash 2WD, and Stampede 2WD trucks. This set is designed to accommodate telemetry sensors...

This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth...

This is a Traxxas Servo Case for 2018 servos.FeaturesReplaces top, center and bottom sections of damaged servo casesConstructed of black plasticIncludesOne Servo Case Set for the Traxxas #2018 Servo...

This is a pair of Traxxas 1/16 Summit Canyon AT Tires mounted on Geode Wheels with Red Simulated Beadlocks. The tires come pre-mounted, so you can install and use them right away!INCLUDES:Two...

This is the Traxxas Skid Plate Set for use on the 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Front SkidplateOne Rear SkidplateOne Transmission Skid...

These are a set of 2.2" Mounted Satin Chrome Wheels and Tires for the Traxxas Slash, TRAC43**. FEATURES:Rear tires2.2" Satin Chrome WheelsOff-Road Racing Tires5 spoke design INCLUDES:Two 2.2" mounted...

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel INCLUDES:Four wheels and two axles REQUIRES:Installing on wheelie...

This is the 16-T Pinion (48-pitch) Gear with Set Screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your...

This is the Traxxas Green HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite...

This is the Traxxas Blue HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material,...

This is the Traxxas Red HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material,...

This is the Traxxas Black HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite...

This is the Traxxas Orange HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite...

This is the Traxxas BL-2s Waterproof Brushless ESC BL-2s Brushless Electronic Speed ControlThe waterproof BL-2s speed control delivers all the benefits of brushless technology with the safety and...

These are the Traxxas E-Revo 2 Front, Mid, and Rear skidplates for use with trucks running the 8629 and 8630 bulkheads (stock on E-Revo 2).Stock Replacement OnE-Revo 2.0

This is the Traxxas X-Maxx 8S Chassis Top Brace. Replacement X-Maxx chassis top brace Replacement Part ForX-Maxx UltimateX-Maxx

This is the Traxxas 11-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 11-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears...

This is the Traxxas Cush drive key/ pin/ elastomer damper. This is Traxxas part number 6465Part Number: 6465 / TRA6465FitsXO-1More detail coming soon! Please check your vehicle manual to confirm...

This is a set of two Traxxas Battery Compartment Doors for the 1/10 E-Revo and Summit trucks.Includes: One left and one right doorFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitMore detail...

This is the Traxxas 2.5 and 3.3 Spring-Mounted Exhaust Header Set for the Revo 2.5, 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer Pro

This is a set of four Traxxas 4x13mm Screw Pins with Threadlock. These are used on many vehicles, such as the E-Maxx, T-Maxx, Revo 3.3, Slayer, and XO-1.FeaturesMetal ConstructionBlack in ColorHex...

This is the Traxxas Black Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD

This is a pair of Traxxas 72mm Turnbuckles for use as tie rods or optional rear camber rods. This is Traxxas part number 2335.

These are the Traxxas Self-Lubricating 5x11x4mm Bushings (14). These are Traxxas part 1675.FeaturesMade of metalIncludes: 14 bushingsSpecifications: 5x11x4mmComments: These bushings would work on...

This is the Traxxas Differential Gear Set for the Slash 4x4, Stampede 4x4, 1/10 Rally, XO-1, and Telluride vehicles. These feature hardened steel construction.INCLUDES:Two Output GearsTwo Spider...

These are the Front and Rear Body Mounts and Posts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.FeaturesNylon constructionBlack in colorIncludesOne Front Body MountOne Rear Body MountTwo...

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed...

These are the Traxxas Talon Tires Pre-Mounted on Gemini Black Chrome Wheels for the 1/16 E-Revo vehicles. The Talon's unique tread pattern and soft compound rubber delivers excellent grip on a...

This is the Traxxas Red Mini Maxx Assembled Wheelie Bar The Mini Maxx wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar...

This is the Traxxas Green Mini Maxx Assembled Wheelie Bar The Mini Maxx wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie...

This is the Traxxas Orange Mini Maxx Assembled Wheelie Bar The Mini Maxx wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie...

This is the Traxxas Black Mini Maxx Assembled Wheelie Bar The Mini Maxx wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie...

This is the Traxxas Unlimited Desert Racer Satin Black Chrome-Plated Front Skidplate. Dress up your UDR with the full line of Traxxas satin black chrome-plated parts for an incredible scale...

These are the Traxxas TRX-4 Ford Bronco Extended Portal Drive Stub Axles (2). These stub axles have extended threads for use with optional center caps. Replacement Part ForTRX-4 1979 Chevrolet...

This is the Traxxas aluminum (pink Anodized Shock Caps Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any...