Traxxas

This is the Traxxas DCB M41 Boat Prop Shaft Flex Cable. This flexshaft is 380.9mm in length. Replacement 380.9 mm propeller shaft (flex cable)FitsDCB M41 boats

This is a set of four Traxxas Black Body Clip Retainers. These body pin retainers are perfect for keeping your clips from going missing when prepping your boat at the lake.FitsDCB M41Spartan

This is the Traxxas TQi 2.4GHz 2-Channel Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver included. Traxxas Stability ManagementTraxxas Stability Management...

This is the Traxxas Propeller Shaft Flex Cable Set for the Traxxas Spartan Boats. Replacement propeller shaft (flex cable) SpecificationsLength: 387.35mm (15.25")Prop Shaft Diameter: 5mm (0.20")Flex...

These are the Traxxas Motor Coupler, Collet, Hardware and Wrenches Collet-style motor coupler with 4x3 stainless grub screw with applied threadlock and 10 mm wrenches (2) Replacement Part ForDCB M41...

This is the Traxxas Stuffing Tube Seal and Pushrod Seal Stuffing tube seal and push rod hull seal Replacement Part ForDCB M41 WidebodyDisruptorSpartan

This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander. The auto-detectable temperature sensor plugs into...

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged,...

This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section...

This is the Traxxas 5000mAh 14.8v 4-Cell 25C LiPo Battery (155mm). These can be used in the Maxx 4S, Unlimited Desert Racer (UDR) and X-Maxx 8S trucks.FitsMaxx 4SUnlimited Desert Racer (UDR)X-Maxx...

This is the Traxxas Drive Dog and Set Screw for the Spartan and DCB M41 Boats. Drive dog with stainless 4x3 mm grub screwReplacement Part ForDCB M41 WidebodyDisruptorSpartan SRSpartan

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts...

This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws. Set of twelve 3 mm hardened steel grub screwsReplacement part for these models1/16...

This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.

This is a set of four Traxxas Blue Body Clip Retainers. These body pin retainers are perfect for keeping your clips from going missing when prepping your boat at the lake.FitsDCB M41Spartan

This is the Traxxas 2055 High-Torque Servo.  This has 80 oz/in of torque, making it an excellent steering servo.  This works well in the Traxxas T-Maxx, E-Maxx, Revo or any...

This is the Traxxas DCB M41 Boat Stand. These are a must-have for storage and maintenance of a boat like the M41 catamaran.FitsDCB M41 boats

This is the Traxxas Boat Stand for use with the Spartan and Blast boats. Display your Traxxas V-bottom boat securely with this multi-configuration boat stand. FeaturesBlack plastic constructionFour...

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an...

This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes...

This is a Traxxas Servo Case for 2018 servos.FeaturesReplaces top, center and bottom sections of damaged servo casesConstructed of black plasticIncludesOne Servo Case Set for the Traxxas #2018 Servo...

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading...

This is the Traxxas 2056 High-Torque Waterproof Servo   High-Torque Waterproof Servo 80 oz-in torque Transit time 0.23 sec/60°   Replacement Part For Bandit BIGFOOT No. 1 Officially...

This is a stock replacement telescoping antenna from Traxxas.  This works with all current Traxxas radios, including the TQ2 and TQ3 transmitters.

This is the Traxxas Rudder Mount and Rudder Pivot Blue-anodized aluminum rudder mount and rudder pivot Includes(4) Stainless 4x14 mm Mounting Screws(2) 4 mm Locknuts Accessory Part ForSpartan SR

This is the Traxxas Steel Propeller (42x59mm) with M4x0.7 NL Upgrade your Spartan or DCB-M41 with this high-performance steel 42x59 mm prop. Includes locknut. M4x0.7 NL *Steel prop requires aluminum...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo...

This is a set of four Traxxas Green Body Clip Retainers. These body pin retainers are perfect for keeping your clips from going missing when prepping your boat at the lake.FitsDCB M41Spartan

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws Replacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is the Traxxas 2074 Servo Case and Gasket Set for 2056 and 2075 Waterproof Servos. Replacement Part For 4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOTBlastChevrolet...

This is the Traxxas Disruptor Aluminum Rudder Arm Aluminum Rudder Arm. Includes(2) 3x15mm BCS (Stainless)(1) 3x18mm BCS (Stainless)(3) NL 3.0 Accessory Part ForDisruptor

This is the Traxxas Disruptor Aluminum Rudder Mount and Hinge Pin with Hardware Aluminum rudder mount and hinge pin. Includes (4) 4x14mm BCS (Stainless)(2) NL 4.0(1) 4x3mm GS (Stainless, with...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip...

This is the Traxxas DCB M41 Boat Rudder Mount, Pivot and Hardware.FitsDCB M41 boats

These are Traxxas Body Clips for the Traxxas Vehicles.  It is always good to have extra body clips around to keep your body securely fastened.  These fit all of the .15, 2.5, and 3.3...

This is the Traxxas Sealed Waterproof Receiver Box with Hardware.  Sealed receiver box for Traxxas micro receivers.IncludesOne Receiver BoxOne Rubber SealFoam PaddingTwo 2.5x8mm Cap Head...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert...