Traxxas

These are the Traxxas 4-Tec 2.0 White Stripe 2.8 Rate Shock Springs (2). These can be used on all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Accessory Part For4-Tec 2.0 VXL Chassis4-Tec 2...

These are the Traxxas 4-Tec 2.0 Orange Stripe 3.325 Rate Shock Springs (2). These can be used on all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Accessory Part For4-Tec 2.0 VXL Chassis4-Tec...

These are the Traxxas 4-Tec 2.0 Black Stripe 4.4 Rate Shock Springs (2). These can be used on all 4-Tec 2.0 vehicles, including the Ford GT and Mustang GT.Accessory Part For4-Tec 2.0 VXL...

These are the Traxxas 4-Tec 2.0 Green Stripe 4.075 Rate Shock Springs (2). These can be used on all 4-Tec 2.0 vehicles, including the Ford GT and Mustang GT.Accessory Part For4-Tec 2.0 VXL...

These are the Traxxas 4-Tec 2.0 Front and Rear Suspension Arm Mounts and Hinge Pin Retainers. These are used on both the Ford GT and Mustang GT versions.Fits4-Tec 2.0

This is the Traxxas TRX-4 Scale Crawler Transmission or Differential Output Drive Cup, Ball, Pin, Retainer, and Hardware.IncludesPin RetainerDrive CupDrive BallDrive Pin3x11 Screw PinBlack Cross...

This is the Traxxas TRX-4 Crawler GTS Shock Rebuild Kit with x-rings, o-rings, pistons, bushings, e clips, and rod ends. This includes enough parts to rebuild two shocks.FitsTRX-4

This is the Traxxas TRX-4 Crawler Steering Servo Horn.FitsTRX-4

This is the Traxxas TRX-4 Scale Crawler Sealed Receiver Box with Cover, Hardware, and Silicone Grease.IncludesReceiver BoxWire coverFoam padsSilicone grease3x8 Buttonhead capscrews (5)2.5x8 Capscrews...

These are the Traxxas TRX-4 Crawler Front and Rear Inner Fender Braces.FitsTRX-4

This is the Traxxas TRX-4 Land Rover Defender Grill, Headlight Housings, Lens, Mount Set for use with the #8011 series bodies. FitsTRX-4 #8011 bodiesIncludesGrillGrill Mounts (3)Headlight housings...

This is the Traxxas 14-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 14-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...

This is set of four Traxxas X-Maxx and XRT GTX Shock Red Aluminum Spring Adjusters. These are threaded and mount on the shock body to allow adjustment of the spring pressure.Red-anodized aluminum...

This is the Traxxas Aton Front Left & Right LED Lens (Orange). This is Traxxas part number 7953Part Number: 7953 / TRA7953FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual...

This is the Traxxas X-Maxx Replacement Chassis.FeaturesOne-piece molded composite plastic constructionSeparate molded compartments for ESC, batteries and moreIncludes: Chassis for the Traxxas X-Maxx

This is the Traxxas Oil-Filled Shocks (Assembled with Springs) (2) Pair of replacement oil-filled shocks for LaTrax Teton or Prerunner Replacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas Center Driveshaft (One-Way) Add the aluminum one-way driveshaft to help lock up the rear end for better drift controlFitsLaTrax RallyLaTrax Teton

This is the Traxxas Skidplate, front. This is Traxxas part number 7437Part Number: 7437 / TRA7437Fits1/10 RallySlash 4x4 PlatinumSlash 4x4 UltimateMore detail coming soon! Please check your vehicle...

This is the Traxxas Bumper, front (1)/ rear (1)/ bumper mount, rear (1). 1/16 scale Summit front and rear bumpers Replacement Part for1/16 Summit

This is the Traxxas Blue Aluminum 12mm Wheel Hubs This set of four 12 mm blue-anodized hex wheel hubs fit with greater precision and look awesome on the axles. The hubs are machined from solid...

This is the Traxxas Spring, shock (GTR) (2.06 rate, tan) (1 pair). This is Traxxas part number 7147Part Number: 7147 / TRA7147Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16...

This is the Traxxas Rod ends (8)/ hollow balls (8) Set of eight rod ends with hollow balls Accessory Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Slash 4X41/16 SummitTRX-4M 1/18 1979...

This is the Traxxas Linkage, front sway bar (2) (assembled with rod ends, hollow balls and ball studs). This is Traxxas part number 6895Part Number: 6895 / TRA6895Fits1/10 RallySlash 4x4...

This is the Traxxas Tires, Kumho, ultra-soft (S1 off-road racing compound) (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2).Replica Kumho tires are molded in ultra-soft S1 compound rubber for...

This is the Traxxas 12mm Hex, (Blue-Anodized) 6061-T6 Aluminum Wheel Adaptors with (4) 3x10 Screw Pins and 0.25 inch Drill Bit (For 6mm Shafts) 12 mm blue-anodized aluminum hex adapters feature a 6...

This is the Traxxas LED lens, red (4).  These are the replacement lens for the Alias.FitsAlias

This is the Traxxas Motor, clockwise (high output, red connector) (1). One clockwise replacement Alias motor Replacement Part ForLaTrax Alias Quad Rotor Helicopter

This is the Traxxas Main shaft, 7075-T6 aluminum, blue-anodized (4)/ 1.6x5mm BCS (4). This is Traxxas part number 6633XPart Number: 6633X / TRA6633XFitsAliasMore detail coming soon! Please check...

This is the Traxxas Canopy, Alias, orange/ 1.6x5mm BCS (self-tapping) (3). This is Traxxas part number 6613Part Number: 6613 / TRA6613FitsAliasMore detail coming soon! Please check your vehicle...

This is the Traxxas Axle carriers, rear, 6061-T6 aluminum, left & right (blue-anodized). This is Traxxas part number 6455Part Number: 6455 / TRA6455FitsXO-1More detail coming soon! Please check your...

This is the Traxxas BFGoodrich Mud-Terrain Tires on SCT Chrome Red Beadlock Wheels for 2WD Front. Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome...

This is the Traxxas Tire & wheel assy, glued (SCT black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (2WD front). This is Traxxas part number 5864Part Number: 5864 /...

This is the Traxxas Nerf bars, low CG (grey). Change up the color on your low-CG-equipped 2WD Slash with these black nerf bars. Does not fit standard chassis. Accessory Part ForDrag Slash 1967...

This is the Traxxas Nerf bars, low CG (blue). Change up the color on your low-CG-equipped 2WD Slash with these black nerf bars. Does not fit standard chassis. Accessory Part ForDrag Slash 1967...

This is the Traxxas Nerf bars, low CG (black). Change up the color on your low-CG-equipped 2WD Slash with these black nerf bars. Does not fit standard chassis. Accessory Part ForDrag Slash 1967...

This is the Traxxas Stainless Steel Left and Right Turn Fin Set with Hardware for the Spartan and DCB M41 Boats. Replacement left and right turn fins with (4) 4x12 mm stainless mounting...

This is the Traxxas Hatch Post, Water Outlet, Foam Pads and Hardware for the Spartan and DCB M41 boats. Hatch post with hull water outlet, foam pads (10), washer, 4x8 mm stainless screw and 3x4 mm...

These are the Traxxas Canyon AT Tires with Foam Inserts for 3.8" Traxxas-bead Wheels. These massive tires are what come stock on the 1/10 Summit. The Canyon AT has aggressive, angular lugs, along...

This is the Traxxas Motor Mount Hinge Post with Hardware for 1/10 Summit and E-Revo trucks.IncludesOne Motor Mount Hinge PostOne 4x10mm socket cap screw with split and flat washerOne 4x12mm socket...

This is a pair of Traxxas Titanium-Nitride Coated GTR Shock Shafts for use with the Traxxas 5460-series GTR Shocks. The 5460-series GTR shocks are the shocks available for the Jato, Revo 3.3,...