Traxxas

This is the Traxxas Pink Front Bumper and Mount for Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD

This is a pair of Traxxas TRX-4 Crawler 12mm Hex Wheel Hubs with Stub Axle Pins. This includes two hex hubs, two pins, and two screw pins.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4...

These are the Traxxas TRX-4 Crawler Portal Drive Caster Blocks and Kingpin Bushings. This includes two castor blocks and four kingpin bushings.FitsTRX-4

This is the Traxxas Aton Rotor Blade Set (2) (White) w/Screws. This is Traxxas part number 7927Part Number: 7927 / TRA7927FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual...

These are the Traxxas X-Maxx Battery Hold-Down Mounts with ScrewsFeatures:Molded composite plastic constructionFastens to chassis top brace and holds battery hold downs in placeIncludes:Four Battery...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke red chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke blue chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke black chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing...

This is the Traxxas Tires, slick (2). Set of two slick tires. Fits: Front or Rear. Replacement Part For1/18 LaTrax Rally1/18 LaTrax Rally VR46

This is the Traxxas Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForFord Fiesta ST...

This is the Traxxas Push rods, aluminum (red-anodized) (4) (assembled with rod ends). This is Traxxas part number 7118XPart Number: 7118X / TRA7118XFits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas Lower chassis, low CG (blue). This is Traxxas part number 5831APart Number: 5831A / TRA5831AFitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD...

This is the Traxxas Spartan Rudder Pushrod, Servo Horn and Hardware.Includes:Rudder pushrodServo horn3x18mm buttonhead cap screw3x15mm cap screw3x6mm cap screw3mm locknut FitsSpartan

This is the Traxxas Spartan Radio Tray, Retainer, Stuffing Tube Clamp and Hardware.IncludesOne radio trayTwo radio tray retainersOne stuffing tube clampTwo 4x16mm stainless steel buttonhead cap...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 17mm Splined Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, T-Maxx, and Summit trucks...

This is a pair of Traxxas 15x24x5mm Blue Rubber-Sealed Ball Bearings.Features Steel construction with blue rubber seals Used in the front and rear differentials of the X-Maxx Includes: Two 15 x 24...

This is a set of Traxxas 3x30mm Cap-Head Shoulder Screws and Draglink Shoulder Screws for the Bandit, Nitro Slash, Rustler XL-5, and Slash 2WD XL-5 trucks.Includes:(2) 3x30mm Bellcrank Screws(2)...

These are the Traxxas 3x20mm Roundhead Machine Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashSkullyStampede XL-5 2WD

This is a pair of Traxxas Tracer 2.2" Black Chrome Rear Wheels for the Traxxas Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pin.FEATURES:Black Chrome...

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used...

This is the Temperature and Voltage Sensor for the XO-1 On-Road Car from TraxxasFeaturesFunctions with the Traxxas TQi Link system to display battery voltage and temperature.IncludesTemperature and...

These are the Traxxas Front and Rear Toe Links for use on the 1/16 Slash and E-Revo vehicles. Features: Nylon construction Red in color Includes:Two Front and two Rear Toe LinksEight Hollow...

These are the Traxxas Pushrods for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Red in color Includes:Four PushrodsEight Hollow Balls Specifications:Length: 55mm (2.2")Diameter: 5.2mm...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2...

This is the Traxxas 27mHz Two Channel AM Receiver without BEC. 2-channel 27MHz receiver without BEC (for use with electronic speed control) Features: Mounting tabs on either side insure secure...

This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES Replaces worn diff carriers gaskets and spacers INCLUDESDiff Carrier and GasketsSteel Spider Gear Braces (not used with...

This is a pair of Traxxas 2.8" Black Chrome All Star Wheels mounted with Talon Tires. Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with...

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system...

This is the optional .8 Metric Pitch 65 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES:Nylon construction, black in color.8 metric pitch INCLUDES:One 65T 0.8 metric pitch spur...

This is the Wing Mount for the Traxxas Revo 3.3 FEATURES:Nylon ConstructionBlack in Color INCLUDES:Two Wing SupportsOne Wing MountFour 4mm x 8mm Cap Head Socket ScrewsFour 3mm x 12mm Cap Head Socket...

This is a Traxxas Jato 2.5 and 3.3 Complete Fuel Tank Assembly.  This direct replacement tank features clear nylon construction with spring loaded lid, pre-installed pressure fittings, and the...

This is a Traxxas Jato 2.5 and 3.3 E-Z Start Wiring Harness.  This is a direct replacement part.

This is the Traxxas Front, Mid-Front, and Rear Skid Plate set for the Revo 3.3, 1/10 E-Revo, and Slayer trucks.IncludesFront, mid-front, and rear skid plates(8) 3X10mm button head screws(1) 3X30mm...

This is the Traxxas Front Bulkhead for the Revo and Slayer. Features: Black plastic construction Rocker shafts preinstalled Includes:Front bulkhead halves(2) rocker shafts(4) 4X14mm button...

This is a pair of Traxxas Steel Pushrods with installed rod ends for use with Progressive 1 Rockers or long travel rockers. If you need the rockers too, search our store for TRA5357. If you would...

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a...

This is the Stock Replacement Diff Gear Set for the Traxxas T/E Maxx.  These gears can also be referredto as bevel gears. FEATURES:Durable steel construction INCLUDES:Two 13 Tooth Output Gear...

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck. This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930 and provides protection to the front differential...

This is the Traxxas Mini GTR Short TiN-Coated Shock Shafts (2) These hardened-steel shafts for short Mini GTR shocks have a super tough titanium nitride coating with a micro-polished finish that...