Traxxas

These are the Traxxas 3x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Monster Jam Trucks1/10 SummitBandit VXLBandit...

This is a pair of Traxxas Tracer 2.2" Chrome Front Wheels for the Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pins.FEATURES:Chrome 5-spoke designFits...

This is a pair of Traxxas Bandit Rear Alias 2.2" Tires Mounted on Tracer Chrome Wheels. These are a soft-compound tire with foam inserts, pre-mounted and glued on chrome wheels.These are a direct...

This is a pair of Traxxas Bandit Alias 2.2" Rear Tires with Foam Inserts. These are a soft-compound tire, for use with 2.2" wheels on the Traxxas Bandit XL-5 and VXL buggies.

This is a tube of Traxxas Marine Grease (30cc) for use on RC boats like the Traxxas Spartan. This is a must-have accessory to keep the flexshaft of your boat in good condition and performance at its...

This is a pair of Traxxas GTR Shock Springs (XX-Long 1.004 Blue) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring...

This is a pair of Traxxas GTR Shock Springs (Long .623 Orange) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks Shock springs for 1/10 scale long GTR shocks use high-quality spring steel...

This is the Traxxas Center Harness and Wire Clip for the LED Lights used on the Summit 1/10 truckFeatures:JST ConnectorsIncludes:One Center HarnessOne Wire ClipThree Zip Ties

This is the optional Clear Body for the Traxxas Summit VXLFeaturesTrimmed and ready to paintIncludesOne Clear Body for the Traxxas 1/16 Summit VXLRequiresPolycarbonate safe spray or brush-on...

This is the Chassis for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionGrey in colorSpecificationsLength: 245mm (9.6")Width: 107mm (4.2")Height: 40mm (1.6")

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic...

These are the Traxxas All-Star Chrome Wheels with Talon Tires Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with foam inserts and pre-glued...

These are the 4x15mm Round Head Machine Screws from Traxxas.FeaturesSteel construction Silver in colorIncludesSix 4x15mm Round Head Screws SpecificationsLength: 15mm (0.59")Width: 4mm (0.16")

These are the optional Traxxas Differential Output Yokes for the E-Maxx, T-Maxx .15, 2.5, and 3.3 trucks. FEATURES: Features thicker plastic for long life and durability These diff yokes are more...

This is the Traxxas Spartan Stuffing Tube with Nylon Liner. Replacement stuffing tube assembled with liner Features: Brass and nylon construction Includes: One Assembled Stuffing...

This is a pair of Traxxas Aluminum Bellcrank Posts for the T-Maxx and E-Maxx trucks. These bellcrank posts hold the steering bellcranks to the chassis. The link connects the steering...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1...

These are Traxxas Steering Bellcranks and Draglinks for the Traxxas Rustler, Stampede, and Bandit. Left and right steering bellcranks with drag link Features: White Plastic...

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, -20% Rate, Orange (2) Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without...

These are Teflon Washers from Traxxas. This will work on the Nitro Rustler. FEATURES Teflon washers INCLUDESTen Teflon washers REQUIRESTraxxas Nitro Rustler SPECS6x9.5x.5

This is the Traxxas Plastic Washers,Wht: ST, RU, BA(6)

These are a set of 2.2" Mounted Satin Chrome Wheels and Tires for the Traxxas Slash, TRAC43**. FEATURES:Front tires2.2" Satin Chrome WheelsOff-Road Racing Tires5 spoke design INCLUDES:Two 2.2"...

This is an optional Wheelie Bar Mount for all versions of the Traxxas Revo. FEATURES:Constructed of hardened plastic, black in colorInstalls at rear of chassis to hold wheelie bar arm and wheels in...

This is the optional Extended Battery Hold Down Set for the Traxxas E-Maxx Series. FEATURES:Composite nylon construction, black in colorInstall one way and you can secure battery packs up to 21mm in...

This is the 1st Speed Gear 32T for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One 1st Speed Gear 32TOne Input Gear 14TOne Threaded Pin...

This is Traxxas Jato 2.5 and 3.3 Assembled Composite Tuned Pipe.  This features molded composite construction and includes a rubber header gasket. Replacement...

This is a set of Traxxas Jato 2.5 and 3.3 Front Upper and Lower Bulkheads. FEATURES:Nylon ConstructionBlack in Color INCLUDES:One Front Upper BulkheadOne Front Lower Bulkhead

This is a Traxxas Jato 2.5 and 3.3 Receiver and Battery Box Cover Set.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Rear Bumper.

This is a set of Traxxas Left and Right Steering Servo Mounts for the Traxxas Jato 2.5 and 3.3 trucks.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Front Body Mount.

These are the Traxxas Hurricane 3.8" Chrome Wheels with 14mm Hex Hubs. These will work with tires that have the 3.8" Traxxas style bead.Fits these vehicles when using 14mm hexes1/10 E-Revo...

This is a Traxxas Steering Servo Guard Set.  These protect your steering servos If you crack or break these, you should always fix them.  Without fixing them you risk damaging your servos...

This is the Traxxas Ford Mustang Drag Slash Blue Body Give your Drag Slash a striking new look with this licensed Ford Mustang 5.0 body. The body is modeled after the popular notchback 5.0...

This is the Traxxas Ford Mustang Drag Slash Green Body Give your Drag Slash a striking new look with this licensed Ford Mustang 5.0 body. The body is modeled after the popular notchback 5.0...

This is the Traxxas Titanium Turnbuckle Jato 4x4 Set Get your 4X4 prepped for race day with this titanium turnbuckle set. Made from ultra-strong and lightweight titanium alloy, these turnbuckles save...

This is the Traxxas Gray Aluminum GTM Shocks (4) Take your TRX-4M to the next level with big-truck suspension technology. Heavy-duty GTM shocks are made from tough 6061-T6 aluminum and anodized with...

This is the Traxxas Orange Aluminum GTM Shocks (4) Take your TRX-4M to the next level with big-truck suspension technology. Heavy-duty GTM shocks are made from tough 6061-T6 aluminum and anodized...