Traxxas

These are the Traxxas TRX-4 Crawler Left and Right Front Inner Portal Drive Housings and 2.5x4mm Screws (6).FitsTRX-4

This is a pair of Traxxas X-Maxx GTX Assembled 110mm Steel Shock Shafts with rod ends and hollow balls.FeaturesSteel construction with chrome finishComposite plastic rod ends and pressed-in ...

This is the Traxxas Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). Replacement GTR shock...

This is the Traxxas Primary Shaft, 1st Speed Hub, and One-Way Bearing for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.IncludesOne Primary ShaftOne One-Way BearingOne Snap RingOne spacerFitsRevo 3...

This is the Traxxas Black Chrome Front and Rear Bumper Set for the Revo 3.3, 1/10 E-Revo, and 1/10 E-Revo Brushless Trucks.Fits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo 3.3

This is the Traxxas Waterproof Sealed Receiver Box with Hardware for vehicles like the E-Maxx Brushless, Slash 4x4, and Blast boats.FitsBlastE-MaxxE-Maxx BrushlessSlash 4x4Slash 4x4 PlatinumSlash 4x4...

These are the Traxxas 3x23mm Roundhead Machine Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacSkullyStampede XL-5 2WD

These are the Traxxas 3x6mm Roundhead Machine Screws. Each package includes six screws.Fits:1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashNitro VeeSkullyStampede XL-5 2WD

This is a pair of Traxxas Tracer 2.2" Chrome Rear Wheels for the Traxxas Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pin.FEATURES:Chrome 5-spoke...

This is a pair of Traxxas Bandit 30-degree Caster Blocks. These will fit the Bandit XL-5 and VXL buggies.

This is a Traxxas Hard Chrome Suspension Pin Set with E-clips. These are used on the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:2 - 24X3mm pins4 - 31.5X3mm pins2 -...

This is the Traxxas E-Maxx Gear Cover for Single Motor Installation. This works on the E-Maxx 16.8V and E-Maxx Brushless when running a single motor and the 3997X single motor plate.

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive...

This is a set of Traxxas Rear Differential Housings for the Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, and the XO-1 carsIncludes: Two rear differential housing halves  

This is a pair of Traxxas Drive Yokes for the Revo, T-Maxx 3.3, E-Maxx 3905 and others. These yokes attach to the half shaft assemblies. Features: Black plastic construction Includes:Two...

These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black...

This is the Traxxas Half Shaft Set: T-Maxx 3.3, Revo & E-Maxx. Overview Half shaft set: left or right (plastic parts only) (internal splined half shaft, external splined half shaft, rubber boot)...

This is the Resonator Tuned Pipe for the Traxxas Maxx Series Trucks With TRX Racing Engines. FEATURES:Resonator aluminum tuned pipe is specifically engineered to boost performanceThe dual-chamber...

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series...

This is the Traxxas TRX 3.3 Engine Piston and Sleeve for the Traxxas TRX 3.3 engines.  This fits the 3.3 engines used in the Traxxas Revo, T-Maxx, Jato, and Nitro 4-Tec vehicles.  A new...

This is the Traxxas Heavy Duty X-Monster Chevrolet GMT400 CK Clear Body - OPEN/DAMAGED BODY *The factory packaging has been opened but the body has not been used/installed. The body has damage to it,...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Wheelie Bar Wheels (for #7776, 8976 or 9576 Wheelie Bars) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors,...

This is the Traxxas Velineon VXL-3s Electronic Speed Control 6 mm The fully-waterproof Velineon VXL-3s forward/reverse electronic speed control simplifies brushless technology with three drive modes,...

This is the Traxxas White Front Mini Rally Wheels with Hard Tires (2) Mini Rally front tires are harder than rear tires to maintain Rally's superior handling and balance. Mini Rally tires offer...

This is the Traxxas White Rear Mini Rally Wheels with Soft Tires (2) Mini Rally rear tires are softer than the front tires to maintain Rally's superior handling and balance. Mini Rally tires offer...

This is the Traxxas Black Front Mini Rally Wheels w/ Slick Tires (Hard) (2) Designed for 3s brushless power, Mini Rally Speed Slick tires put maximum traction to the pavement for astonishing...

This is the Traxxas Black Rear Mini Rally Wheels w/ Slick Tires (Soft) (2) Designed for 3s brushless power, Mini Rally Speed Slick tires put maximum traction to the pavement for astonishing...

This is the Traxxas Velineon VXL-3m Brushless Power System for use in Traxxas 1/16 Scale vehicles. This will not fit 1/10 scale vehicles. - OPEN BOX/ITEM *The factory packaging has been opened but...

This is the Traxxas Hardware Kit for Mini Maxx or Mini XRT Give your Mini model a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your...

This is the Traxxas Stainless Steel Hardware Kit for Spartan & DCB M41 Contains all stainless steel hardware used on Spartan and DCB M41 boats. Replacement Part ForDCB M41 WidebodySpartan

This is the Traxxas Rustler 4x4 Red and Blue Painted Body Assembled with Front & Rear Mounts and Rear Body Support for Clipless Mounting Is it time to upgrade your Rustler 4X4 with an all-new...

This is the Traxxas Rustler 4x4 Pink and Purple Painted Body Assembled with Front & Rear Mounts and Rear Body Support for Clipless Mounting Is it time to upgrade your Rustler 4X4 with an all-new...

This is the Traxxas Rustler 4x4 Green and Blue Painted Body Assembled with Front & Rear Mounts and Rear Body Support for Clipless Mounting Is it time to upgrade your Rustler 4X4 with an all-new...

This is the Traxxas #25 Mark Jenkins Nitro Slash Painted Body Is it time to upgrade your Slash with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with...

This is the Traxxas #47 Mike Jenkins Nitro Slash Painted Body Is it time to upgrade your Slash with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with...

This is the Traxxas Bigfoot No. 1 Body Conversion Kit For Clipless Mounting - Includes front & rear body mounts, latch, hardware The clipless body conversion kit includes all the body mounts,...

This is the Traxxas Mini Maxx Hardware Kit Give your Mini Maxx a complete refresh with this all-inclusive hardware kit. Traxxas hardware kits replace all screws and fasteners on your Mini Maxx with...

This is the Traxxas Velineon VXL-4s High Output Waterproof Brushless Electronic (Fwd/Rev/Brake) Speed Control ESC - OPEN BOX/ITEM *The factory packaging has been opened but the part has not been used...

This is the Traxxas Disruptor Rudder Mount, Steering Arm, Drive Strut Mount and Hull Water Outlet with Hardware Replacement rudder mount, steering arm, drive strut mount, and hull water outlet...

This is the Traxxas Spartan SR 6.5x10x0.5mm PTFE-coated Washers Set of six 6.5x10x0.5 mm PTFE-coated washers. Requires: #10328 and #10385 for complete installation Replacement Part ForSpartan SR