Traxxas

This is the Traxxas Dual Port LiPo Battery Charger for the Traxxas QR-1 Quad Rotor Helicopter.FEATURES: Plugs into USB port of computer Charges two of the 3.7V 240mAh LiPo batteries used in the...

This is a Traxxas Counter-Clockwise Motor for use on the Left Front or Right Rear of the QR-1 Quad Rotor Helicopter.

This is a Traxxas Clockwise Motor for use on the Right Front or Left Rear of the QR-1 Quad Rotor Helicopter.

This is a set of four Traxxas Motor Caps for the QR-1 Quad Rotor Helicopter

This is two complete sets of Traxxas Rotor Blades for the Traxxas QR-1 Quad Rotor Helicopter. INCLUDES: Two each Red, Blue, Green and Orange Rotor Blades (two...

Traxxas EZ-Peak 5-Amp AC/DC Charger This is the Traxxas EZ-Peak 5-Amp NiMH and NiCD AC/DC Battery Charger. The Traxxas EZ-Peak 5-amp NiMH charger packs more power for faster charging, which results...

This is the Traxxas 25C 7.4V 2S 2-Cell 5000mAh LiPo Battery Pack. This battery is ideal for all Slash and Slash 4X4 models, E-Maxx Brushless Edition, E-Revo Brushless Edition, Spartan, as well as...

This is a pair of Traxxas Geode Blue Wheels for the 1/16 scale Summit.FeaturesSix chrome spokes on blue beadlock "look" wheelsIncludes: Two wheelsSpecifications:Width: 1.18"(42.7mm)Diameter: 2.2"...

This is the Traxxas Nitro Rustler 2.5 Ready-to-Run Stadium Truck with the TQ 2.4GHz Radio System. This comes with the TRX 2.5 racing engine, capable of pushing this truck to 50+MPH right out of the...

This is two full sets of Traxxas QR-1 Quad Rotor Helicopter Rotor Blade Sets.  It includes four white and four black rotor blades.FeaturesPlastic constructionReplaces damaged or missing rotor...

This is a Traxxas QR-1 Quad Rotor Helicopter Upper and Lower Canopy in Orange.FEATURESPlastic construction, black in color with orange graphicINCLUDESUpper and Lower Canopy sections with Instructions...

This is a Traxxas QR-1 Quad Rotor Helicopter Upper and Lower Canopy in Green.FEATURESPlastic construction, black in color with green graphicINCLUDESUpper and Lower Canopy sections with Instructions...

This is the Traxxas QR-1 Blue Upper & Lower Canopy Set

This is a Traxxas QR-1 Quad Rotor Helicopter Upper and Lower Canopy in Red.FEATURESPlastic construction, black in color with red graphicINCLUDESUpper and Lower Canopy sections with Instructions and...

This is the Traxxas Slash Pro 2WD 1/10 Scale Short-Course Ready-to-Race Truck with the TQ 2.4GHz radio system. This truck comes fully assembled and Ready-To-Race, with the Traxxas TQ 2.4GHz radio...

This is the Traxxas 3.7V 240mAh LiPo Battery for the Traxxas QR-1 Quad Rotor HelicopterIncludes: 3.7V 240mAh LiPo Battery with 2-Pin ConnectorSpecifications:Dimensions: 0.79 x 1.3 x 0.29" (20 x 33.3...

This is the Traxxas Robby Gordon Speed #7 Short Course Racing Truck Body for the Traxxas Slash 4x4 and Slash 2WD trucks. Features: Trimmed and painted Includes:Robby Gordon Speed #7 Trim Scheme Body...

This is the Traxxas Jerry Whelchel Chet Huffman Motorsports Short Course Racing Truck Body for the Traxxas Slash 4x4, Slash 2WD, and Slayer Pro trucks. Features: Trimmed and painted Includes:Jerry...

This is the Traxxas Slash 4x4 Platinum Edition with the new low-CG chassis. The Slash Platinum is packed with features like 6061-T6 aluminum upgrades, front and rear swaybars, high-volume GTR shocks,...

This is the Traxxas QR-1 Quad Rotor Ready-to-Fly Helicopter. Everything you need to get the QR-1 flying is included right in the box!The Traxxas QR-1 is the easy way to experience acrobatic flying...

This is the ProGaphix Body for the Traxxas 1/16 scale E-Revo VXL 4WD RTR.FeaturesPlastic constructionPre-painted graphicsIncludes1/16 E-Revo ProGaphix Body with two decal sheets  ...

This is the Rear Bumper and Mount for the Traxxas Slash 4x4.FeaturesHardened plastic constructionBlack in colorIncludesOne rear bumperOne rear bumper mount

This is the Front Bumper and Mount for the Traxxas Slash 4x4.FeaturesHardened plastic constructionBlack in colorIncludesOne front bumperOne front bumper mount

This is the Traxxas GPS Speed Telemetry Module for use with TQi radio systems. Standard telemetry sensors use your model's gear ratio and tire size to calculate its speed based on RPM. Using the...

This is the Traxxas Telemetry Expander for use with the TQi Radio Systems. The telemetry expander supports up to six plug-and-play sensors, as well as GPS telemetry speed module #6551. Features of...

This is the Traxxas Power Tap Connector For the TQi Telemetry setups on electric vehiclesNote: If your speed controller has a iD High Current Connector you will need to change the plug to a 1st...

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry. Features Compatible with all Traxxas models that include the TQi telemetry systemMay also be used with all current Traxxas TQ 2...

This is the Traxxas Rustler VXL Prographix  body with decals.OverviewWith the ProGraphix process, you will never see bleeding paint or over-sprays that need to be covered up with a page full of...

This is the Traxxas ProGraphix Body and Decal Sheet for the Stampede VXL 1/10 Scale Monster Trucks.  From mild to wild, choose your own color and personalize your body.  The...

This is the 3S LiPo Dual Charging Adapter Board for the Traxxas EZ-Peak Plus 6-amp charger (Traxxas part 2933). This is not designed for use with any other chargers. FeaturesAllows two 3-cell...

This is the 2S LiPo Dual Charging Adapter Board for the Traxxas EZ-Peak Plus 6-amp charger (Traxxas part 2933). This is not designed for use with any other chargers. FeaturesAllows two...

This is the Traxxas Power Cell 7.4V 3800mAh 25C 2S LiPo Battery. Traxxas’ 3800mAh Power Cell LiPo packs are ideal for all Slash, Slash VXL, Slash 4x4 VXL, E-Maxx Brushless, and E-Revo Brushless...

This is the Traxxas Power Cell 7.4V 3300mAh 25C 2S 2-Cell LiPo Battery. This is great for both XL-5 (must have low voltage detection) and VXL brushless versions of the 1/10 vehicles. This is a direct...

This is the Traxxas 2218X Micro TQ 2.4GHz 5-Channel Receiver with Traxxas LinkFeatures2.4GHz technology Traxxas Link automatic model recognition software allow previously bound receiver to be...

This is the Traxxas DTS-1 Drag Timing System. Capture the Total Drag Racing Experience. You've never seen anything like this before! Traxxas innovation takes your racing fun to a whole new level with...

This is the Traxxas 2-3 Cell LiPo Battery Balance Charger. The Traxxas 2-Cell / 3-Cell LiPo Balance Charger allows for simple, convenient charging of Traxxas Power Cell LiPo packs. Your battery...

This is the Traxxas EZ-Peak Plus AC/DC battery charger. The Traxxas EZ-Peak Plus is a fully-programmable AC/DC charger designed for fast and easy charging of LiPo, LiFe, LiIon, NiMH, NiCd, and even...

This is the Traxxas ProGraphix Body with Decals for the E-Revo. Features Graphics are printed, requires paint & final color application Overview With the ProGraphix process, you will never...

This is the Traxxas #47 Mike Jenkins Short Course Racing Truck Body for the Traxxas Slash 4x4 and Slash 2WD trucks. Features: Trimmed and painted with a red and black color scheme Includes: #47 Mike...

This is the Traxxas Greg Adler 4 Wheel Parts Short Course Racing Truck Body for the Traxxas Slash 4x4, Slash 2WD, and Slayer trucks. Features: Trimmed and painted with the Greg Adler 4 Wheel...