Traxxas

These are the Traxxas Cross Pins and Drive Pins for use on the Summit 1/10 truck. Features: Steel construction Includes:Four Cr

This is the Traxxas Revo 3.3 Adjustable Rear Suspension Arm Set. This allows you to lengthen the wheelbase by 10mm or 19mm depending on conditions and driver preference. OverviewAdds an additional

These are the Traxxas Front and Rear Toe Links for use on the 1/16 E-Revo VXL 4WD. Features: Nylon construction Red in colo

These are the Traxxas Pushrods and Hollow Balls for use on the 1/16 E-Revo VXL 4WD. Features: Molded composite construction Red

These are Traxxas Assembled Short Course Tires and Wheels for use on the Traxxas 1/16 Slash VXL 4WD. Features: SCT satin chrome wheels

This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color

This is the Traxxas Mamba ESC Mounting Plate for the Brushless E-Revo and Brushless E-Maxx. Features: Nylon construction

This is the Traxxas Transmission Output Shaft for the Revo. Features: Metal construction Black in color

This is a package of Traxxas 5mm x 8mm Bearings (8). Includes: Eight 5mm x 8mm Bearings Specifications:Height: 2.5mmInner D

These are Traxxas 5mm Nylon Locknuts (8). Features: Chromed steel construction Nylon inserts

This is the Traxxas Lower Chassis Brace for the E-Maxx 16.8V and E-Maxx Brushless. Features: Nylon construction Black in co

These are the Traxxas 59mm Turnbuckle Toe Links for the Traxxas Rustler, Stampede, and Bandit. Features: Metal and Nylon Construction

These are the replacement Hollow Balls and Shims for FEATURES Metal Construction

This is the Brake Disc for the Traxxas T-Maxx 4WD RTR Monster Truck. This disc fits between the brake pads and fastens to the rear of the gearbox. FEATURES

This is the Traxxas S1 Slash Tread Racing Tires (2): Slash & Slash 4x4. Features

This is the Chassis Brace for the Traxxas Revo 3.3. FEATURES Constructed of 0.12" (3mm) thick 6061 T-6 aluminum

These are the Chassis Braces for the Traxxas New T-Maxx 3.3 4WD Nitro Monster Truck RTR. FEATURES Nylon construction, black in color

These are the 3.5mm Male Bullet Connectors from Traxxas. FEATURES Gold plated

This is the Traxxas planet & Sungears, Shaft: N, NB, NRU,SLH Replacement hardened-steel internal gears for 2381X differential. Includes planetary gears (4), planetary shafts (4), sun gears (2), and...

These are a set of Traxxas 2.8" Talon Tires Mounted on All Star Wheels. These will fit the front of the electric Stampede 2WD and Rustler, Front & Rear of the Stampede 4x4, or the rear of the Nitro...

These are the Rear Red Assembled Tires and Wheels from Traxxas FEATURES Rubber construction, SCT off-road design

This is the Brake Yoke w/Pins for the Traxxas Revo. It is use on the Center/Front Driveshaft Assembly. FEATURES:Plastic Brake YokeSteel Brake Pins(each knurled on one end)Steel Screw Pins

This is the Long Wheelbase Chassis for the Traxxas E-Maxx. FEATURES:Nylon construction, gray in colorReplaces worn or damaged chassis

This is a set of Rear Only 2.8" Mounted All Star Wheels and Tires for the electric Traxxas Stampede. FEATURES:2.8" All Star black chrome wheelsTalon tires with foam inserts

This is the Traxxas Jato Low RPM Resonator Tuned Pipe This single-chamber Resonator aluminum tuned pipe is precision-engineered on the dyno to increase the low to mid-RPM power output of TRX Racing...

This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES:4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't neededConstructed of hardened...

This is a package of Progressive Rate Shock Springs from Traxxas for use with the Traxxas Ultra Shocks set only. These may be used on either the front or rear of the T-Maxx 3.3. FEATURES:Steel...

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas Slash 2WD and other vehicles. FEATURES:Metal construction.

These are 5mm Nylon Locknuts by Traxxas. FEATURES:Blue anodized aluminum construction.Nylon inserts. INCLUDES:Four 5mm locknuts. SPECS:Thic

This is the Stock Replacement Clutch Shoes and Spring for the Nitro Stampede. These shoes are locatedunderneath the clutchbell. FEATURES:Black in color

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx. These Braces are located in between the bumper mounts. FEATURES:Black nylon construction

This is the optional 39mm Aluminum Front Turnbuckle Set from Traxxas. FEATURES:Anodized aluminum construction, red in colorBlack nylon ball ends and steel link set

These bearings may be used with Traxxas vehicles or on whatever vehicle they will fit. PACKAGE INCLUDES:2-Bearings

Traxxas Big Bore shocks provide ultimate damping control. They’re hard-anodized, Teflon®-coated and have large cylinders for greater oil capacity. These shocks also include our super smooth, long...

This is the replacement Starter Shaft for the T-MAXX 2.5 engine. FEATURES:Steel Construction INCLUDES:

This is the replacement Recoil String for use with the Traxxas 2.5/2.5R recoil starters. FEATURES:Direct replacementNylon construction

This is a Traxxas Jato 2.5 and 3.3 Primary Shaft and One-Way Bearing.FEATURES:Metal Construction

This is a set of Anti-Roll Bars and Linkages for use with the Traxxas Jato 3.3, TRAC83**. These are mounted onto the front and rear of the vehicle and help make the vehicle more responsive to...

This is the replacement 2-Speed Gear Set for the Traxxas Jato 2.5 and 3.3 trucks.FEATURES: Steel and nylon construction, black in colorINCLUDES: 17 Tooth metal pinion gear.29 Tooth plastic spur.

This is the Rubber Plug and Charge Jack for the Traxxas Nitro Jato Stadium Truck. FEATURES:Rubber constructionBlack in color