Traxxas

This is the Traxxas TRX-4 Crawler 39-Tooth 0.8 Mod Spur Gear.FitsTRX-4

This is the Traxxas TRX-4 Crawler Jack and Screw Pin.FitsTRX-4

This is the Traxxas TRX-4 Crawler Spare Tire Mount, Bracket, and Screw Pins (2).FitsTRX-4

This is the Traxxas TRX-4 Crawler Front and Rear Fender Flare Set. This is a full set of four flares, including two front and two rear. Front and rear fender flares for the TRX-4 8011-series Land...

These are the Traxxas 2.5x8mm Button-Head Hex Machine Screws (6). Each package includes six screws.FitsTRX-4 Crawler

This is a Traxxas X-Maxx and XRT Red Aluminum GTX Shock Cap and Spacer Set. This includes all four shock caps. Set of four red-anodized aluminum shock caps add strength and style to GTX shocks. Shock...

This is a set of Traxxas X-Maxx and XRT Red Aluminum Hex Wheel Hubs (4). These are a great upgrade from the stock plastic hex hubs. Upgrade your stock 24 mm plastic wheel hubs with the ruggedness and...

This is the Traxxas X-Maxx 6S Differential Ring Gear. This can be used in the front or rear differential.Features Hardened steel construction Fits front or rear differential Includes: Ring Gear

This is a set of four Traxxas 17mm Splined Serrated Blue Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel...

This is the Traxxas X-Maxx and XRT Front and Rear Tie Bar Mount SetFeatures One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and rear...

This is the Traxxas Suspension pin set, complete (front & rear) / hardware. Complete front and rear suspension pin set with hardware Replacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax...

This is the Traxxas Wing, 1/16 E-Revo (Exo-carbon finish)/ decal sheet.Wing, 1/16 E-Revo (Exo-carbon finish)/ decal sheet Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless

This is the Traxxas Cover, gear/ motor wire hold-down clip. Replacement gear cover with motor wire hold-down clip Replacement Part For BIGFOOT 4X4 Brushless Officially Licensed ReplicaFord F-150...

This is the Traxxas Cover, center driveshaft (clear). This is Traxxas part number 6741Part Number: 6741 / TRA6741FitsStampede 4x4 VXLStampede 4x4 XL-5TellurideMore detail coming soon! Please check...

This is the Traxxas LED lens, blue (4). This is Traxxas part number 6652Part Number: 6652 / TRA6652FitsAliasMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or...

This is the Traxxas Lower chassis, low CG (grey). This is Traxxas part number 5831GPart Number: 5831G / TRA5831GFitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD...

This is the Traxxas 1/10 Summit Front Chrome Bumper, Lightbar, and Roof Lightbar.Fits1/10 Summit

This is a set of Traxxas 1/10 Summit Left and Right Rear Bulkhead Halves.Fits1/10 Summit

This is a set of Traxxas 1/10 Summit Fender Flairs, Retainers, and Screws.IncludesTwo Front Fender FlairsTwo Rear Fender FlairsTwo Front Fender Flair RetainersTwo Rear Fender Flair RetainersTwenty...

This is the Traxxas Jato 3.3 Battery Box and Rear Bumper. This battery box includes mounting bosses to install the wheelie bar.IncludesBattery box with coverFour 2.5X10mm Socket Head Cap...

This is a pair of Traxxas Shock Dust Boots for Jato and XO-1 shocks. These help protect your shock shafts to keep them in great condition and operating smoothly.Includes:Two Blue rubber Shock...

This is the Traxxas OptiDrive Electronic Shift Module for Revo 3.3, T-Maxx 2.5R, and T-Maxx 3.3 (with reverse) trucks.FitsRevo 3.3T-Maxx 2.5RT-Maxx 3.3

These are the Traxxas 17mm Splined Green Aluminum Wheel Hubs, Nuts, & Screw Pins for the 1/10 E-Revo, E-Maxx, Summit, T-Maxx, and Revo 3.3 trucks. These allow you to run wheels with a 17mm hex size...

This is a set of six Traxxas 4mm Grub / Set Screws with Threadlock. Set of six 4 mm set screws (grub screws) with threadlock Replacement Part ForE-Revo VXL BrushlessJatoNitro SlashRevoSlayer Pro...

This is a set of four Traxxas 3x10mm Flat-Head Hex Drive Machine Screws. Set of four 3x10 mm flat-head machine screws with hex drive headsReplacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD...

These are Traxxas 2.5x5mm Button-Head Hex Machine Screws. Each package contains six screws. Replacement part forBandit VXLFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Rustler VXLSlash...

These are the Traxxas XX-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shocks shafts. These XX-long hardened steel shafts have a super tough titanium nitride...

These are the Traxxas 3x18mm Roundhead Machine Screws. Each package contains six screws.FitsE-MaxxE-Maxx BrushlessNitro Slash

This is a pack of Traxxas 3x30mm Cap Hex Head Machine Screws. Each package includes six screws.

This is a set of Traxxas Threaded Rods (20mm, 25mm, & 44mm), and a 12mm Set Screw.Includes20mm Threaded Rod25mm Threaded Rod44mm Threaded Rod12mm Set Screw Replacement Part ForBandit...

This is a pair of Traxxas Tracer 2.2" Black Chrome Front Wheels for the Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pins.FEATURES:Black Chrome 5-spoke...

This is a pair of Traxxas Front White Springs. These fit the front long Ultra Shocks (3760A) on many Traxxas vehicles.Fits:Bandit VXLBandit XL-5Nitro RustlerNitro SlashNitro SportNitro...

These are the Traxxas Hardened Steel Titanium-Nitride Coated Shock Shafts. These are an excellent upgrade for many Traxxas vehicles.Includes: Two shaftsSpecificationsDiameter: 3mm (0.118")Length: 47...

This is a pair of Traxxas GTR Long Shocks with Hard-Anodized Aluminum Shock Bodies and Titanium-Nitride Coated Shafts. These are a great upgrade for Slash 4x4 and Stampede 4x4 trucks. 1/10 scale long...

This is a pair of Traxxas GTR Shock Springs (Long .892 Blue) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel...

This is a pair of Traxxas GTR Shock Springs (XX-Long .884 Pink) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring...

This is the Traxxas Telemetry Expander Mount 6556 for the XO-1, E-Revo*, Summit*, T-Maxx, E-Maxx, Revo 3.3, and Slayer Pro trucks. This part makes it possible to mount the #6550 Telemetry Expander...

This is the Traxxas Front LED Light Harness with Four Lights for use on the Summit 1/10 TruckFeatures:JST ConnectorClear LED LightsIncludes:Four LED LightsTwo Zip Ties

These are the Traxxas Progressive Rate Front Springs (White) for use on the Traxxas 5862 Big Bore Shock set for the 2WD Slash, Nitro Slash, 2WD Stampede, Rustler, Bandit, and Monster Jam...

These are the Traxxas Steel Rocker Arm Posts for the Revo and Slayer vehicles. Features: Black steel construction Includes: Two Rocker Arm Posts Specifications:Length: 1.3" (32.8mm)Diameter: 0.20"...