Traxxas

These are the Traxxas E-Revo 2 Front and Rear Transmission Gearbox Halves with Idler Gear Shaft.Stock Replacement OnE-Revo 2.0

This is the Traxxas E-Revo 2 Differential Gasket, X-ring, and Washer Set. These are a must-have item if you are opening or repairing your E-Revo diffs.Stock Replacement OnE-Revo 2.0

This is the Traxxas E-Revo 2 Chassis. This must be used with #8629 and 8630 bulkheads.Stock Replacement OnE-Revo 2.0

This is the Traxxas 4-Tec 2.0 62-Tooth Spur Gear.Accessory Part For4-Tec 2.0 VXL4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2.0 Ford GT

This is the Traxxas 4-Tec 2.0 Green Aluminum Center Driveshaft. This is an awesome addition to any tricked out 4-Tec 2.0 show car!Accessory Part For4-Tec 2.0 VXL4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec...

These are the Traxxas 4-Tec 2.0 Steel 32mm Front Camber Links (2).Stock Replacement On4-Tec 2.0 VXLAccessory Part For4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2.0 Ford GT

These are the Traxxas TRX-4 GTS 3x47mm TiNi Shock Shafts (2)Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 SportTRX-4 Tactical

This is the Traxxas TRX-4 Slipper Eliminator Plate. Adding this will remove any slippage, giving instant forward/reverse power based on throttle input.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford...

This is the Traxxas 2017 Ford Raptor Body Accessories Set. Included are the grill, hood insert, side mirrors, and mounting hardware.Stock Replacement OnSlash 2WD Ford Raptor

These are the Traxxas X-Maxx Green Aluminum Wheel Hex Hubs. This is a full set of four.Accessory Part ForX-MaxxXRT

This is the Traxxas Pink Wheelie Bar for Stampede 2WD, Slash 2WD, Rustler, and Bandit vehicles. This will work on XL-5 brushed and VXL brushless versions.Fits1/10 Monster Jam TrucksBandit VXLBandit...

This is the Traxxas 4-Tec 2.0 Front Chassis Brace. This is used in both the Ford GT and Mustang GT version.Fits4-Tec 2.0

This is the Traxxas TRX-4 Crawler Skidplate and Lower Gear Cover.FitsTRX-4

This is the Traxxas TRX-4 Crawler 39-Tooth 0.8 Mod Spur Gear.FitsTRX-4

This is the Traxxas TRX-4 Crawler Jack and Screw Pin.FitsTRX-4

This is the Traxxas TRX-4 Crawler Front and Rear Fender Flare Set. This is a full set of four flares, including two front and two rear. Front and rear fender flares for the TRX-4 8011-series Land...

These are the Traxxas 2.5x8mm Button-Head Hex Machine Screws (6). Each package includes six screws.FitsTRX-4 Crawler

This is a Traxxas X-Maxx and XRT Red Aluminum GTX Shock Cap and Spacer Set. This includes all four shock caps. Set of four red-anodized aluminum shock caps add strength and style to GTX shocks. Shock...

This is a set of Traxxas X-Maxx and XRT Red Aluminum Hex Wheel Hubs (4). These are a great upgrade from the stock plastic hex hubs. Upgrade your stock 24 mm plastic wheel hubs with the ruggedness and...

This is the Traxxas X-Maxx and XRT Front and Rear Tie Bar Mount SetFeatures One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and rear...

This is the Traxxas Suspension pin set, complete (front & rear) / hardware. Complete front and rear suspension pin set with hardware Replacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax...

This is the Traxxas Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks). The 1/10 scale GTR shock rebuild kit includes the...

This is the Traxxas Wing, 1/16 E-Revo (Exo-carbon finish)/ decal sheet.Wing, 1/16 E-Revo (Exo-carbon finish)/ decal sheet Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless

This is the Traxxas Cover, gear/ motor wire hold-down clip. Replacement gear cover with motor wire hold-down clip Replacement Part For BIGFOOT 4X4 Brushless Officially Licensed ReplicaFord F-150...

This is the Traxxas Cover, center driveshaft (clear). This is Traxxas part number 6741Part Number: 6741 / TRA6741FitsStampede 4x4 VXLStampede 4x4 XL-5TellurideMore detail coming soon! Please check...

This is the Traxxas LED lens, blue (4). This is Traxxas part number 6652Part Number: 6652 / TRA6652FitsAliasMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or...

This is the Traxxas Lower chassis, low CG (grey). This is Traxxas part number 5831GPart Number: 5831G / TRA5831GFitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD...

This is the Traxxas 1/10 Summit Front Chrome Bumper, Lightbar, and Roof Lightbar.Fits1/10 Summit

This is a set of Traxxas 1/10 Summit Left and Right Rear Bulkhead Halves.Fits1/10 Summit

This is a set of Traxxas 1/10 Summit Fender Flairs, Retainers, and Screws.IncludesTwo Front Fender FlairsTwo Rear Fender FlairsTwo Front Fender Flair RetainersTwo Rear Fender Flair RetainersTwenty...

This is a pair of Traxxas Shock Dust Boots for Jato and XO-1 shocks. These help protect your shock shafts to keep them in great condition and operating smoothly.Includes:Two Blue rubber Shock...

This is the Traxxas OptiDrive Electronic Shift Module for Revo 3.3, T-Maxx 2.5R, and T-Maxx 3.3 (with reverse) trucks.FitsRevo 3.3T-Maxx 2.5RT-Maxx 3.3

This is a set of six Traxxas 4mm Grub / Set Screws with Threadlock. Set of six 4 mm set screws (grub screws) with threadlock Replacement Part ForE-Revo VXL BrushlessJatoNitro SlashRevoSlayer Pro...

This is a set of four Traxxas 3x10mm Flat-Head Hex Drive Machine Screws. Set of four 3x10 mm flat-head machine screws with hex drive headsReplacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD...

These are Traxxas 2.5x5mm Button-Head Hex Machine Screws. Each package contains six screws. Replacement part forBandit VXLFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Rustler VXLSlash...

These are the Traxxas XX-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shocks shafts. These XX-long hardened steel shafts have a super tough titanium nitride...

These are the Traxxas 3x18mm Roundhead Machine Screws. Each package contains six screws.FitsE-MaxxE-Maxx BrushlessNitro Slash

This is a pack of Traxxas 3x30mm Cap Hex Head Machine Screws. Each package includes six screws.

This is a set of Traxxas Threaded Rods (20mm, 25mm, & 44mm), and a 12mm Set Screw.Includes20mm Threaded Rod25mm Threaded Rod44mm Threaded Rod12mm Set Screw Replacement Part ForBandit...

This is a pair of Traxxas Tracer 2.2" Black Chrome Front Wheels for the Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pins.FEATURES:Black Chrome 5-spoke...