Traxxas

This is the Traxxas Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with TiN shafts (fully assembled w/ springs) Take your model to the next level with big suspension technology. New aluminum...

This is the Traxxas Driveshaft, center (long), aluminum/ pin. This is Traxxas part number 7655Part Number: 7655 / TRA7655FitsLaTrax SSTMore detail coming soon! Please check your vehicle manual to...

This is the Traxxas Spur gear, 60-tooth.60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top...

This is the Traxxas Gear, 14-T pinion / set screw. 14-tooth pinion gear. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is full set of four Traxxas 1/16 GTR Hard-Anodized Aluminum Adjustable Shocks with TiN Shafts and PTFE-coated Bodies.  Shock oil is included.  These are the ultimate shock upgrade for...

This is the Traxxas Input shaft (cush drive)/ pin. This is Traxxas part number 6466Part Number: 6466 / TRA6466FitsXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle...

This is the Traxxas XO-1 Tall Battery Hold-Down Retainers. This is Traxxas part number 6427XPart Number: 6427X / TRA6427XFitsFunny CarXO-1More detail coming soon! Please check your vehicle manual to...

This is the Traxxas XO-1 Tall Battery Hold-Down. This is Traxxas part number 6426XPart Number: 6426X / TRA6426XFitsXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle...

This is the Traxxas Body mount posts (2)/ body post pivot (2)/ screw pins, 2.5x18mm (2). This is Traxxas part number 6416Part Number: 6416 / TRA6416Fits1/10 RallyXO-1More detail coming soon! Please...

This is the Traxxas BFGoodrich Mud-TerrainT/A KM2 tires with Chrome Green Beadlock Wheels. Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome SCT...

This is the Traxxas Springs, front (white) (progressive rate) (2). This is Traxxas part number 5857Part Number: 5857 / TRA5857FitsNitro SlashSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL...

This is the Traxxas Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip.Battery hold down and hold down retainer with battery post, foam spacer, and angled body...

This is the Traxxas Nerf bars, chassis (black). This is Traxxas part number 5823Part Number: 5823 / TRA5823FitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD XL-5More detail coming soon!...

This is a set of four Traxxas Red Body Clip Retainers. These body pin retainers are perfect for keeping your clips from going missing when prepping your boat at the lake.FitsDCB M41Spartan

This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod...

This is the Traxxas Blue Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum...

This is the Traxxas 20-Tooth Idler Gear and Shaft for the E-Maxx, E-Maxx Brushless, 1/10 E-Revo, 1/10 E-Revo Brushless, and 1/10 Summit trucks.IncludesOne 20 Tooth Idler GearOne 5x18mm Idler Gear...

This is the Traxxas Black Rear Springs for use on the XX-Long Ultra Shocks used on vehicles like the Slash 2WD, Rustler, Stampede 2WD, Stampede 4x4, and others.Accessory Part ForBIGFOOT No. 1...

This is the Traxxas Green Wheelie Bar Mount with Hardware for Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.IncludesOne wheelie bar mountHardwareInstructions Fits1/10 Monster Jam...

This is a set of Traxxas 3x15mm Flat-Head Hex Drive Machine Screws. Each package includes six screws.Includes: Six 3 x 15mm Flathead Hex Machine Screws Replacement Part ForBandit VXLDrag SlashFord...

These are the Traxxas 3x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Monster Jam Trucks1/10 SummitBandit VXLBandit...

This is a pair of Traxxas Bandit Alias 2.2" Rear Tires with Foam Inserts. These are a soft-compound tire, for use with 2.2" wheels on the Traxxas Bandit XL-5 and VXL buggies.

This is a tube of Traxxas Marine Grease (30cc) for use on RC boats like the Traxxas Spartan. This is a must-have accessory to keep the flexshaft of your boat in good condition and performance at its...

This is a pair of Traxxas GTR Shock Springs (XX-Long 1.004 Blue) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring...

This is a pair of Traxxas GTR Shock Springs (Long .623 Orange) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks Shock springs for 1/10 scale long GTR shocks use high-quality spring steel...

This is the Traxxas Center Harness and Wire Clip for the LED Lights used on the Summit 1/10 truckFeatures:JST ConnectorsIncludes:One Center HarnessOne Wire ClipThree Zip Ties

This is the optional Clear Body for the Traxxas Summit VXLFeaturesTrimmed and ready to paintIncludesOne Clear Body for the Traxxas 1/16 Summit VXLRequiresPolycarbonate safe spray or brush-on...

This is the Chassis for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionGrey in colorSpecificationsLength: 245mm (9.6")Width: 107mm (4.2")Height: 40mm (1.6")

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic...

These are the Traxxas All-Star Chrome Wheels with Talon Tires Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with foam inserts and pre-glued...

These are the 4x15mm Round Head Machine Screws from Traxxas.FeaturesSteel construction Silver in colorIncludesSix 4x15mm Round Head Screws SpecificationsLength: 15mm (0.59")Width: 4mm (0.16")

These are the optional Traxxas Differential Output Yokes for the E-Maxx, T-Maxx .15, 2.5, and 3.3 trucks. FEATURES: Features thicker plastic for long life and durability These diff yokes are more...

This is the Traxxas Spartan Stuffing Tube with Nylon Liner. Replacement stuffing tube assembled with liner Features: Brass and nylon construction Includes: One Assembled Stuffing...

This is a pair of Traxxas Aluminum Bellcrank Posts for the T-Maxx and E-Maxx trucks. These bellcrank posts hold the steering bellcranks to the chassis. The link connects the steering...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1...

These are Traxxas Steering Bellcranks and Draglinks for the Traxxas Rustler, Stampede, and Bandit. Left and right steering bellcranks with drag link Features: White Plastic...

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, -20% Rate, Orange (2) Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without...

These are Teflon Washers from Traxxas. This will work on the Nitro Rustler. FEATURES Teflon washers INCLUDESTen Teflon washers REQUIRESTraxxas Nitro Rustler SPECS6x9.5x.5