Traxxas

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Traxxas Transmitter TQi Traxxas Link Enabled 2.4GHz High Output 4-Channel (Transmitter Only) The 4-channel TQi transmitter combines a full complement of tuning features with the...

This is the Traxxas Transmitter TQi Traxxas Link enabled 2.4GHz high output 2-channel (Transmitter Only) The 2-channel TQi transmitter combines a full complement of tuning features with the...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower...

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD...

This is the Traxxas Jato Straight air filter housing with foam insert and cable tie. Fits Jato with the TRX 2.5, 2.5R, or 3.3 engine. Replacement Part ForJatoTRX 2.5RTRX 3.3

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of...

This is the Traxxas Heat Shield Tubing for Fuel Line (2) Fiberblass heat shield tubing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

This is a bottle of Traxxas 30K Weight Diff Oil (1.75 oz / 50cc) with filler nozzle. This oil can be used to tune differentials in many Traxxas vehicles for optimum performance.For use with these...

This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric...

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shielded with blue rubber seals Includes: Two Ball...

These are the Traxxas Red Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler, Stampede...

This is the Slipper Clutch Rebuild Kit for the Traxxas Vehicles. The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin,...

This is the Traxxas 1200mah 5-Cell NiMh flat receiver battery pack for use in the Traxxas Jato, Revo, and Slayer Pro trucks.  This 6-volt pack gives the servos power, speed, and will allow...

This is the Traxxas Premium Shock Oil Set with Spinning Carousel Rack FeaturesSeven precise viscosities ranging from 20wt to 80wt100% silicone oil for maximum consistencyPrecision-pour, twist-nozzle...

This is a set of 12 Traxxas 3mm Locking Nuts. These feature chrome nylon locking nuts. Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBIGFOOT No. 1 Officially...

This is a Traxxas High Stall Clutch Set for the Traxxas T-Maxx .15, 2.5, 3.3, Revo 2.5 and 3.3 trucks.  A higher stall lets you rev the engine up higher before the clutch engages,...

This is the Traxxas Blue Exhaust Pipe Coupler and Exhaust Deflector with Cable Ties for mounting the muffler to the header, and the deflector to the tip of the muffler.Fits: Jato 2.5Jato 3.3Revo 3...

This is a Traxxas EZ-Start 2 Replacement Motor and Pinion Gear.  This is used on vehicles like the T-Maxx 2.5, 3.3, Revo 2.5, 3.3, Jato, Nitro 4-Tec, Nitro Rustler, Nitro Slash, Slayer Pro,...

This is the Traxxas Wheel Hubs hex (blue-anodized, lightweight aluminum) (2)/ axle pins (2) These 12 mm aluminum hex wheel hubs are both lightweight and tough as nails with brilliant blue anodizing...

This is the Traxxas Glow Plug Lead Wire for the Revo EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. Features: Blue silicone insulated wire with...

This is package of 24 Traxxas 1.5mm E-Clips. These are used across a large number of Traxxas vehicles to secure pins and other components.Includes: (24) 1.5mm e-clipsSpecificationsOutside diameter: ...

This is the Traxxas Hex Wrench Set with 1.5mm, 2mm, 2.5mm, 3mm, and 2.5mm ball wrenches. Whether you have a Slash, Revo, E-Maxx, Summit, or something else, these are a must-have set of wrenches for...

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES Great lubrication for nylon gears INCLUDESOne tube of lithium grease...

This is a Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 Antenna Crimp Nut and Antenna Nut Wrench.  This includes the antenna crimp nut and the wrench.

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a...

These are the Traxxas Blue Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler,...

This is a pair of Traxxas Throttle Dust Boots and a Return Spring for use on the carburetors of the TRX 2.5, 2.5R, and 3.3 nitro engines.Fits:Jato 2.5 & 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo...

This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander. The auto-detectable temperature sensor plugs into...

This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section...

These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (...

This is the Traxxas 4 AA Battery Holder for Receivers in Nitro vehicles like the Jato, Nitro Rustler, T-Maxx, and others. Jato 4 AA battery holder with Futaba-style connector. No On/Off switch...

This is an assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. Includes: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock...

This is the Traxxas Red Aluminum Antenna Crimp Nut with Nut Wrench, for use on many Traxxas vehicles including the Revo, E-Maxx, Jato, Slash 2WD, and T-Maxx trucks.Fits1/10 E-Revo Brushed1/10 E-Revo...

This is the Replacement Roller Clutch for the Traxxas 2.5 and 3.3. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the EZ starter and is also used with a pull...

This a bottle of 10K Weight Diff Oil (1.75 oz / 50cc) with a filler nozzle. This oil can be used in a wide range of Traxxas vehicles to help tune the differentials for optimum performance.For use...

This is a pair of the Traxxas Nitro Rear/Electric Front All Star Wheels and Anaconda Tires. FEATURES:Black chrome plated plastic, five spoke designSplit X-Pattern tread tires with foam...

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts...

This is the Traxxas Molex/Tamiya to Receiver Pack Charging Adapter. This adapter allows you to use a charger equipped with a standard Tamiya-style plug to charge receiver batteries.