Traxxas

This is the Battery Compartment Door and Vents for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorIncludesOne battery compartment doorTwo vents

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro...

This is the Traxxas 1/16 Blue Aluminum Front and Rear Bulkhead Tie Bars with a 2.5x6 Capscrew.Stock Replacement On1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the Traxxas Ball bearings, blue rubber sealed (8x12x3.5mm) (2). Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance,...

This is the Traxxas Rocker arm set, progressive-2/ plastic bushings (8).Rocker arm set, progressive-2/ 4x7x2.5mm PB (8)Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...

This is the Traxxas Sensor, temperature and voltage (short). This is Traxxas part number 6523Part Number: 6523 / TRA6523Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...

This is the Traxxas Complete Differential Assembly for the 1/16 scale E-Revo, Summit, Slash, Rally, and other Traxxas 1/16 vehicles.Includes: One complete differential assembly

This is a replacement Black Wing with Decals for the Traxxas 1/16 E-Revo VXL Truck.FeaturesNylon constructionBlack in colorIncludes:One WingOne Decal...

This is a Traxxas 19T 48P Pinion Gear. FEATURES:Metal constructionGrey in color INCLUDES:One 19T 48P Pinion GearOne Set Screw REQUIRES:Installation

This is a set of two (2) Traxxas 4mm x 7mm x 2.5mm Blue Rubber Shielded Ball Bearings.  These are factory replacements.  These fit several Traxxas models. Upgrade your standard plastic...

This is the Traxxas Premium Large Rubber Overmold Speed Bit Handle with 1/4" Drive for use with Traxxas Speed Bit Metric Hex/Allen and Nut Driver tips. The large speed bit handle holds bits securely...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Traxxas Gear set, differential (output gears (2)/ spider gears (3))/ differential output shafts (2)/ 1.5x6mm pin (3)/ 1.5x8mm pin (2). This is Traxxas part number 7082Part Number: 7082 /...

This is the Traxxas Velineon 380 Brushless Motor Rebuild Kit for the 1/16 brushless system. It includes two 4x9x4mm ball bearings, two 2x6mm screws with threadlock, and two front shims.Includes:Two...

This is full set of four Traxxas 1/16 GTR Hard-Anodized Aluminum Adjustable Shocks with TiN Shafts and PTFE-coated Bodies.  Shock oil is included.  These are the ultimate shock upgrade for...

This is the Chassis for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionGrey in colorSpecificationsLength: 245mm (9.6")Width: 107mm (4.2")Height: 40mm (1.6")

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex...

This is the Traxxas Driveshaft, steel constant-velocity, 1/16 E-Revo (shaft only, 68mm)/ drive cup pin (1). This is Traxxas part number 7153Part Number: 7153 / TRA7153Fits1/16 E-Revo Brushed1/16...

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry...

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit vehicles.FEATURESNylon constructionBlack in colorINCLUDESTwo...

This is the Traxxas Foam Body Washers - 2mm/3mm/4mm Adhesive-backed foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure...

This is the Traxxas Bumpers, front (1)/ rear (1). This is Traxxas part number 7135Part Number: 7135 / TRA7135Fits1/16 E-Revo Brushed1/16 E-Revo VXL BrushlessMore detail coming soon! Please check...

This is the Traxxas Spur gear, 55-tooth. This is Traxxas part number 7047R55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Left Axle CarrierOne Right...

This is the Traxxas Gearbox Halves Front & Rear Front and Rear gearbox halves Replacement Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit

This is the Traxxas Push rods, aluminum (red-anodized) (4) (assembled with rod ends). This is Traxxas part number 7118XPart Number: 7118X / TRA7118XFits1/16 E-Revo Brushed1/16 E-Revo VXL...

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2...

This is the Traxxas LiPo cell voltage checker/balancer. This voltage checker and balancer requires the #2938X adapter if you are using it with Traxxas iD batteries.Use the LiPo battery checker...

This is the Traxxas Wing, 1/16 E-Revo (Exo-carbon finish)/ decal sheet.Wing, 1/16 E-Revo (Exo-carbon finish)/ decal sheet Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless

This is the Traxxas Blue Aluminum 1/16 Motor Plate When upgrading your 1/16 scale vehicle to Velineon brushless power, you will need to change the standard motor plate and mount. Use the 7090 motor...

This is the Traxxas Gear Set for Micro Waterproof ServoReplacement gear set for 2080A servo. Does not fit 2080 or 2080X servos.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash...

This is the Traxxas Waterproof Micro ServoThe 2080A waterproof micro servo gives you the freedom to drive in rain, mud, and snow.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash...

This is the Traxxas LED Lights, Power Supply (Regulated, 3V, 0.5-Amp) w/ Power Tap ConnectorThis rugged and waterproof power supply provides a tightly-regulated 3-volt output current for your Traxxas...

This is the Traxxas LED Light Kit, 1/16 E-Revo Light up the track with this powerful LED light kit for the 1/16 scale E-Revo. With four LEDs on the front bumper, E-Revo blazes a path through the...

These are the Traxxas Flanged and Serrated Nuts, Aluminum (4mm) (Orange-Anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for...

This is the Traxxas Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin). Transmission gear set includes 18-T and 25-T input gears, 13-T...

This is the Traxxas Gear Cover with Motor Mount Hinge PostReplacement gear cover with motor mount hinge post and 3x10 mm screw with split and flat washers and 3x8 mm screwAccessory Part For1/16...