Traxxas

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, +20% Rate, Blue (2). Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without...

This is the Rear Plastic Skidplate for the T-Maxx 3.3. FEATURES Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in color INCLUDESSkidplate and stainless steel...

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R. FEATURES Constructed of plastic these posts and mount attach the body to...

This is a replacement set of skid plates for the Traxxas Stampede. Black front and rear skid plates for Traxxas 2WD Stampede models. FEATURES Made of black molded nylon For the Traxxas...

This is the optional Blue Traxxas Resonator Dyno-Tuned Performance Pipe for the Traxxas Jato, Nitro Rustler and Nitro 4-Tec with TRX Racing Engines. FEATURES:The Traxxas Resonator aluminum tuned pipe...

This is the Receiver Box for the T-Maxx 3.3. FEATURES:Holds receiver and Optidrive Shift Module in placeTwo piece, gray in color, constructed of hardened plastic INCLUDES:Receiver Box and Body...

These are the Traxxas Tubes Lightweight Red Aluminum Turnbuckles for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks.FEATURES: 30% lighter than stock steel toe links 4 times...

This is an optional Wheelie Bar Mount for the Traxxas Electric Stampede, Rustler and Bandit. FEATURES:Constructed of hardened plastic, black in colorInstalls at rear of chassis to hold wheelie bar...

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1...

This is a package of Aluminum Pushrod Spacers for the Traxxas Revo. These are installed on the Progessive suspension system. FEATURES:Red anodized aluminum construction INCLUDES:Eight 4x6x3mm...

This is a Traxxas Jato 2.5 and 3.3 Shim Set.  This includes four silver metal hollow balls and four 3mm silver washers.  These are for adjusting the roll center of the truck.

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned Performance Pipe for the Revo 2.5 and 3.3 monster trucks.  This gives the Revo nearly 20% more power on the bottom-end, where...

This is the Traxxas Center Differential Kit for the Revo 3.3. This also includes the forward-only conversion kit as part of the setup.Features Direct drop-in for the Revo 3.3, standard chassis...

This is a Traxxas T-Maxx Slide Carb Linkage Set, including the throttle link, brake link, and hardware. This works on T-Maxx 2.5 and 3.3 trucks with a slide carb.IncludesOne long linkage wire...

This is a pair of Traxxas Jato 2.5 and 3.3 Throttle Return Springs.  You don't want to run a truck without this on it.

This is replacement Traxxas Fuel Tank Pull Ring, Cap, and Shutoff Clamp for the Revo 2.5 and 3.3 trucks.   Fuel tank cap Kit with pull ring, tank cap, and engine shut-off clamp

This is a Traxxas Heavy Duty Servo Saver Spring for the Revo 2.5 and 3.3.  This servo saver spring should be used when using metal geared servos.

This is a Traxxas Revo Transmission Skid Plate and Roll Hoop Set for the Traxxas Revo 2.5 and 3.3 trucks.  If you crack or break these, you should always fix them.  Without fixing...

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine...

This is a Traxxas Lower Chassis Brace Set for the Traxxas T-Maxx .15, 2.5, S-Maxx, Stadium Maxx, and E-Maxx (model 3906).  These are stock replacements...

This is the Traxxas Front and Rear Skid Plates / Bumpers Replacement front and rear skid plates Replacement Part ForMini MaxxMini XRT

This is the Traxxas 2085XL Digital High-Torque Metal Gear (Ball Bearing) Waterproof Servo Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link Servo...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Gray-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas (1979) Ford F-150 Clear Body with Accessories (Includes grille, side mirrors, door handles, windshield wipers) From mild to wild, Traxxas clear bodies are your own personal canvas...

This is the Traxxas TRX-4m 6061-T6 Aluminum (Black-Anodized) 1″ Beadlock Wheels Take your TRX-4M to the next level with these black-anodized aluminum beadlock wheels. Made from tough 6061-T6...

This is the Traxxas TRX-4m 6061-T6 Aluminum (Silver-Anodized) 1″ Beadlock Wheels Take your TRX-4M to the next level with these silver-anodized aluminum beadlock wheels. Made from tough 6061-T6...

This is the Traxxas Front Clipless Body Mount Adapter with Inserts Front clipless body mount adapter with inserts (2) Replacement Part ForFord F-150 Raptor R 4X4

This is the Traxxas Caster Blocks Left & Right (C-Hubs) These left and right caster blocks (C-hubs) were redesigned and beefed-up for XRT. Standard in XRT, they can be used to upgrade X-Maxx for...

This is the Traxxas Front or Rear Center Driveshafts Rebuild Kit (Steel Constant-Velocity) For #9655X steel CV driveshafts Rebuild kit for 9655X steel CV center driveshafts includes hardware to...

This is the Traxxas Center Assembled Driveshaft (Steel Constant-Velocity) Give your Sledge the ultimate driveline upgrade with these heavy-duty center CV (constant velocity) driveshafts. Made from...

This is a set of four Traxxas TRX-4 Black Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels. Accessory Part ForTRX-4...

This is a set of four Traxxas TRX-4 Satin Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels.Accessory Part ForTRX-4...

These are the Traxxas TRX-4 Rear Heavy Duty Chromoly Axles. These are for use with the TRA8065 machined rear portal input drive gears.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...

These are the Traxxas TRX-4 Front Heavy Duty Chromoly Left and Right Axle Shafts. These can only be used with the TRA8064 machined portal drive input gear.Accessory Part ForTRX-4 Crawler KitTRX-4...

This is the Traxxas E-Revo 2 Heavy-Duty Differential Carrier, Gaskets and Spacers. This includes the diff carrier, 2 X-ring gaskets, ring gear gasket, 4 spacers, and 12.2x18x0.5 washer.Stock...

These are the Traxxas Unlimited Desert Racer Planetary Gears (4).Stock Replacement OnUnlimited Desert Racer (UDR)