Traxxas

These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16...

This is the Traxxas Low Center of Gravity (Low-CG) Chassis Conversion Kit for the Slash 4x4 trucks.  Lower your CG, increase corner speed, and lower your lap times!  Performance-proven with...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear...

This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a...

This is the Traxxas TRX 3.3 Racing Engine with Pull Start.  This will give your Revo, T-Maxx 2.5, or Jato an unbelievable boost in performance.  This is a must have upgrade. ...

This is the Traxxas Rear XX-Long Ultra Shocks (Black) Complete with Springs and Spacers (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. The...

This is the Traxxas Front Black Long Ultra Shocks complete with Spring Pre-load Spacers and Springs (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance...

This is the Traxxas Chevrolet C10 White Body. Included is the wing and decals. **Requires part #9415 series body accessories to complete body Accessory Part ForDrag Slash

This is the Traxxas Chevrolet C10 Purple Body. Included is the wing and decals. **Requires part #9415 series body accessories to complete body Accessory Part ForDrag Slash

This is the Traxxas Chevrolet C10 Purple Body. Included is the wing and decals. **Requires part #9415 series body accessories to complete body Accessory Part ForDrag Slash

This is the Traxxas Chevrolet C10 Green Body. Included is the wing and decals. **Requires part #9415 series body accessories to complete body Accessory Part ForDrag Slash

This is the Traxxas Chevrolet C10 Blue Body. Included is the wing and decals. **Requires part #9415 series body accessories to complete body Accessory Part ForDrag Slash

This is the Traxxas Chevrolet C10 Black Body. Included is the wing and decals. **Requires part #9415 series body accessories to complete body Accessory Part ForDrag Slash

These are the Traxxas Unlimited Desert Racer Front Differential Ring and Pinion Gears. These are stock replacement diff gears.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Front Bumper and Support.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas TRX-4 Machined Steel Overdrive Differential Ring and Pinion Gear Set. This will fit the front or rear diff on the TRX-4 trucks. Use of this set results in higher wheel speed. ...

This is a pair of Traxxas TRX-4 Tactical 1.9" Wheels.Stock Replacement OnTRX-4 TacticalAccessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Sport

This is a pair of Traxxas Green Rear Springs for XXL Rear Ultra Shocks on trucks such as the Rustler, Slash 2WD, and Stampede.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150...

This is the Traxxas 24-Tooth 48-Pitch Pinion Gear with Set Screw. This can be used with the the 4-Tec 2.0, or any other vehicle requiring a 24T 48-pitch pinion gear.Fits4-Tec 2.0

This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes...

This is a set of six Traxxas Wheel Hex Clips for the X-Maxx monster truck.FeaturesSteel constructionSnaps onto groove of each stub axle to hold wheel hub and uprights in placeIncludes: Six Wheel Hex...

This is the Traxxas Driveshaft Assembly, Front/Rear.Set of two driveshaft assemblies Fit: Front or RearReplacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas 17-Tooth Pinion Gear with 0.8 Mod (compatible with 32-pitch) for 5mm Shaft motors. This can be used on vehicles such as the E-Maxx Brushless and 1/10 Summit. 17-tooth pinion gear...

This is the Traxxas Blue Aluminum Header for Rear Exhaust TRX 2.5, 2.5R, and 3.3 Engines on the Nitro 4-Tec, Nitro Rustler, and Nitro Slash trucks.FitsNitro RustlerNitro SlashTRX 2.5RTRX 3.3

This is the Traxxas Transmission Gear Dust Cover Set with Screws for the Bandit, Rustler, Slash 2WD, and Stampede 2WD trucks. This set is designed to accommodate telemetry sensors...

This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth...

This is a Traxxas Servo Case for 2018 servos.FeaturesReplaces top, center and bottom sections of damaged servo casesConstructed of black plasticIncludesOne Servo Case Set for the Traxxas #2018 Servo...

This is a pair of Traxxas 1/16 Summit Canyon AT Tires mounted on Geode Wheels with Red Simulated Beadlocks. The tires come pre-mounted, so you can install and use them right away!INCLUDES:Two...

This is the Traxxas Skid Plate Set for use on the 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Front SkidplateOne Rear SkidplateOne Transmission Skid...

These are a set of 2.2" Mounted Satin Chrome Wheels and Tires for the Traxxas Slash, TRAC43**. FEATURES:Rear tires2.2" Satin Chrome WheelsOff-Road Racing Tires5 spoke design INCLUDES:Two 2.2" mounted...

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel INCLUDES:Four wheels and two axles REQUIRES:Installing on wheelie...

This is the 16-T Pinion (48-pitch) Gear with Set Screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your...

This is the Traxxas Green HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite...

This is the Traxxas Blue HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material,...

This is the Traxxas Red HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material,...

This is the Traxxas Black HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite...

This is the Traxxas Orange HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite...

This is the Traxxas BL-2s Waterproof Brushless ESC BL-2s Brushless Electronic Speed ControlThe waterproof BL-2s speed control delivers all the benefits of brushless technology with the safety and...

These are the Traxxas E-Revo 2 Front, Mid, and Rear skidplates for use with trucks running the 8629 and 8630 bulkheads (stock on E-Revo 2).Stock Replacement OnE-Revo 2.0