Hot Racing

This is the Hot Racing Spring Loaded Skid Plate 2-Tire Wheelie Bar for the Traxxas 1/16 E-Revo, Slash, Summit, and Rally. This will fit the 1/16 brushed and VXL brushless versions of these vehicles...

This is the Hot Racing 92-Tooth 48-Pitch Hard Anodized Aluminum Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit. It will work with XL-5 brushed and VXL brushless trucks.FEATURES:-...

These are the Hot Racing Black Aluminum Steering Blocks for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- CNC machined aluminum- Anodized black- Machined chamfered edges-...

This is the Hot Racing 20-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like...

This is the Hot Racing dirt guard chassis cover for the 1/10 scale TRA Rally VXL and Slash 4X4 with the Low Center of Gravity (Low-CG, LCG) chassis. The chassis cover attaches to the chassis with...

This is the Hot Racing dirt guard chassis cover for the 1/10 scale TRA Slash 4X4 with the regular (non-LCG) chassis. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape;...

This is the Hot Racing Dirt Guard Chassis Cover for the Rustler 4x4 The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a breathable...

These are the Hot Racing Black Aluminum 0-Degree Rear Hub Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC...

This is the Hot Racing CNC Machined Aluminum Front or Rear Differential Housing Cover for X-Maxx 6S and 8S trucks. This is a direct replacement for Traxxas part 7780 / TRA7780 diff housing covers...

This is the Hot Racing Adjustable Aluminum Servo Saver Steering Bellcrank for the Traxxas 2WD Slash, Rustler, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless versions.FEATURES:-...

These are the Hot Racing Blue Aluminum Hinge Pin Capture Bushings for the Traxxas X-Maxx 6S and 8S trucks.FEATURESReplace worn or damaged hinge pin capture bushingsCNC aluminum...

This is the Hot Racing Black Aluminum Rear Body Mount Post Set for Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will fit brushed and VXL brushless models of these cars.FEATURES:CNC machined...

This is the Hot Racing Black Aluminum Rear Shock Mount for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. This will work on 1/16 brushed and VXL brushless trucks.FEATURES:CNC machined of...

These are the Hot Racing Super Duty Steel CV Drive Shafts and 12mm hexes for Traxxas 1/16 E-Revo VXL trucks. These can be used on the front and rear of the 1/16 E-Revo VXL.FEATURES:CNC construction...

These are the Hot Racing Aluminum Splined 17mm Hex 6mm Offset Hubs for the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +6mm per side...

These are the Hot Racing Front Multi-Rate Springs (3 Pairs) for Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will work on the XL-5 brushed and VXL brushless trucks.FEATURES:Spring...

This is the Hot Racing Aluminum Front Body Post Mount for Traxxas 1/10 E-Revo, E-Revo 2.0, Revo 3.3, Slayer Pro, and 1/10 Summit trucks.This upgrade fits in place of the front body mount in Traxxas...

These are the Hot Racing Heavy Duty Aluminum Rear Axle Housing Lock Outs for the Traxxas Unlimited Desert Racer trucks. These are CNC machined from aluminum and anodized black for a top-notch finish...

This is the Hot Racing Aluminum Rear Multi-Mount Rocker Arms for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. Now you do not need to change the rocker arm to change progressive rate. Just...

This is the Hot Racing Aluminum Steering Rack Center Brace for Traxxas Unlimited Desert Racer trucks. Made of 6061-T6 aluminum with a black anodized finish, these look great and help tighten up the...

These are the Hot Racing Aluminum Adjustable Steering Turnbuckle Tie Rods for Traxxas X-Maxx 6S & 8S trucks. These are well-built and offer adjustability to the front end of the X-Maxx to improve...

This is the Hot Racing Aluminum 54T Slipper Spur Gear (0.8 metric pitch, compatible with 32-pitch) Features CNC machined 6061-T6 aluminum Direct fit replacement for vehicles with slipper clutch...

This is the Hot Racing 46 Tooth Hardened Steel Mod 1 (1.0 metric pitch) Spur Gear FeaturesCNC machined hardened steel construction - Black oxide finished - Laser etched tooth count...

This is the Hot Racing Traxxas E-Revo 2.0 Aluminum Differential Carrier Case. This works on the front or rear of the E-Revo 2.0.This upgrade is a replacement for Traxxas part 8681.Features:- CNC...

These are the Hot Racing Swaybar-Ready Black Aluminum Lower Suspension Arms for the Traxxas X-Maxx 6S and 8S trucks. These can be used with Hot Racing sway bar kit XMX311X06.FEATURES:CNC T6 6061...

This is the Hot Racing HD CNC Machined Hard Anodized Aluminum Slipper Plate and Hub for the 1/10 Traxxas Bandit, Jato 3.3, Rally*, Rustler, Slash 2WD, Slash 4X4*, Stampede 2WD, and Stampede 4X4*...

This is the Hot Racing Aluminum Adjustable Steering Bellcranks and Servo Saver for the Traxxas Unlimited Desert Racer (UDR). This setup is super tough, looks great, and allows for a stiffer setting...

This is the Hot Racing Aluminum Diff Carrier Housing for the Traxxas Unlimited Desert Racer (UDR). This can be used in the front or rear differential.This upgrade replaces Traxxas part 8581...

This is the Hot Racing Traxxas E-Revo 2.0 Aluminum Front Bumper. This bumper features a rugged look, black anodizing, and comes with holes to mount 5mm LEDs if you want to add lights to it.This...

These are the Hot Racing Rear Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler. These work on the rear of the XL-5 brushed and VXL brushless versions of these trucks.FEATURES:-...

These are the Hot Racing Black Aluminum C-Hub Castor Blocks for the 1/10 Traxxas Rally VXL, Slash 4X4, Stampede 4X4, and Telluride 4X4.FEATURES:- CNC machined 6061-T6 aluminum, anodized black- Brass...

This is the Hot Racing 53-Tooth 0.8 Mod 32-Pitch Spur Gear for 1/10 E-Revo, Jato, T-Maxx 3.3, Slash 4x4, Stampede 4x4, Summit, and 1/10 Rally VXL.FEATURES:- CNC machined and lightened hardened steel...

This is the Hot Racing Center Differential Locker Spool for the Traxxas E-Revo 2.0. This part gets installed in the center diff case to eliminate the center differential action, ensuring full power...

This is the Hot Racing 6061-T6 Aluminum Suspension Pin Mount for the Traxxas E-Revo 2.0, original 1/10 E-Revo Brushed & Brushless, Revo 2.5 & 3.3, 1/10 Summit, and Slayer Pro trucks.This upgrade fits...

These are the Hot Racing Aluminum Adjustable Steering Turnbuckle Toe Links for Traxxas Unlimited Desert Racer trucks. These feature aluminum turnbuckles with blue anodized rod ends.This upgrade is a...

This is the Hot Racing Traxxas X-Maxx Aluminum Adjustable Servo Saver and Bellcrank Assembly. This works on the X-Maxx 6S and 8S trucks.FEATURES:- Super-tough, fully adjustable servo saver bell...

This is the Hot Racing Black Aluminum Front Bulkhead for Traxxas 1/16 E-Revo, Summit, Slash, and Rally. This will fit the brushed and VXL brushless versions of these vehicles. This is a direct...

This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision...

This is the Hot Racing Aluminum Transmission Case for the Traxxas E-Revo 2.0 monster trucks. This looks great, and is much more rigid than stock to eliminate flex under heavy loads.This upgrade fits...

This is the Hot Racing Black Aluminum Front Clipless Body Mount for the Traxxas E-Revo 2.0 monster trucks.This upgrade replaces the front mount in Traxxas part 8614.FeaturesAluminum...