This is a pair of Traxxas GTR Shock Springs (Long .653 Green) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

This is the Traxxas Center Differential Housing for the Slash 4x4 and 1/10 Rally vehicles equipped with a center differential. It's a direct replacement for the Slash 4x4 Platinum, and also works on Slash 4x4 and Rally vehicles running the center diff...

This is the Traxxas Complete Differential Assembly for the 1/16 scale E-Revo, Summit, Slash, Rally, and other Traxxas 1/16 vehicles.Includes: One complete differential assembly

This is a set of Traxxas Body Mounts for the Front or Rear of the Slash 4x4 or Stampede 4x4 Truck. Body mount includes body mount posts (2) and body post extensions (2). Fits: Front or Rear. Replacement Part ForSlash 4X4 UltimateSlash 4X4 VXLSlash...

This is a replacement Black Wing with Decals for the Traxxas 1/16 E-Revo VXL Truck.FeaturesNylon constructionBlack in colorIncludes:One WingOne Decal SetSpecificationsLength: 118mm (4.6")Width: 43mm (1...

This is the Team Integy Super Brushless Motor Heatsink with cooling fan for use on the Traxxas 1/16 E-Revo and Slash VXL. This heatsink snaps onto the motor can.FEATURESAluminum construction silver...

This is the Traxxas Rear Bumper and Mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck. Features: Nylon construction Black in color Includes: One Rear Bumper and bumper mount

This is a set of Traxxas Axle Pins.These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. Features: Axle pins are steel Includes: Four 2.5x12mm axle pins Replacement part for these modelsRevoSlayer...

This is the optional Variable Damping Kit for GTR Shocks found on the Traxxas Revo 3.3 RTR and the Traxxas E-Revo RTR. FEATURES Nylon construction Enhances tuning ability of suspension by controlling compression and rebound rate of...

This is a set of RPM Blue Nerf Bars for the Traxxas Slash 2WD and Slash 4x4 standard chassis trucks. This will not fit trucks with a low-CG chassis (does not fit Slash Ultimate).Nerf bars play an extremely important function in the overall durability of...

This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...

These are the Servo Mounts for the T-Maxx FEATURES:Machined Light-Weight Aluminum construction, anodized blue INCLUDES:Aluminum Servo Mounts (left and right)4 3x10 Buttonhead Cap Screws4 3x8 Buttonhead Cap Screws2 3x6 Buttonhead Cap Screws8 Metal...

This is the 19-Tooth Pinion Gear (48-Pitch) 3 mm Bore 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...

This is the optional Single Motor Plate for the Traxxas E-Maxx 16.8V RTR - TRAC92**. FEATURES:Aluminum construction, blue in colorDesigned for a clean install of a single brushless motor system in the E-Maxx 16.8V RTR (requires gear cover number...

This is the Brake Disc for the Traxxas Nitro Jato Stadium Truck. FEATURES:Composite constructionGrey in color INCLUDES:One Composite Brake Disc REQUIRES:Assembly onto Vehicle

This is a set of two (2) Traxxas 4mm x 7mm x 2.5mm Blue Rubber Shielded Ball Bearings.  These are factory replacements.  These fit several Traxxas models. Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal...

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...

This is the Pro-Line '72 Chevy C-10 Long Bed Truck Body for use with the Traxxas Revo 3.3, LST, and MGT trucks.  The body is supplied clear. Features: Made of durabable .060" (1.52mm) thick lexan plastic Perfect fit and porportions for Revo,...

This is the Hitec HS-65HB Mighty Micro Feather Servo with the Universal Connector.  Because this has the universal connector, it will work with JR, Hitec, Futaba, and Airtronics Z radio systems.  This is great for micro helicopters, park...

This is replacement Traxxas Rear Upper and Lower Suspension Arm Set for the Revo 2.5 and 3.3 trucks.  This set will work for the left or right side.  If you need to replace both sides, purchase a quantity of "2"...

This is a set of replacement Traxxas Front Right Upper and Lower Suspension Arm Set  for the Revo 2.5 and 3.3 trucks.  If you need the left side as well, search our store for TRA5332.  It is a good idea to have these on...

This is a Traxxas Revo 2.5 and 3.3 Steel Suspension Hinge Pin Set for the front or rear of the truck.  There are enough pins included to replace the hinge pins in the front or rear of the truck.  To replace all of...

This is a Traxxas Revo 2.5 and 3.3 Steel Pushrod Set (2 rods) with rod ends for use with Progressive 3 Rockers (part TRA5359).  If you would like to replace the front and rear pushrods, purchase a quantity of "2" packs of these rods. Pair of...

This is a Traxxas Front and Rear Shock Mount Set for the Revo 2.5, 3.3, and Slayer trucks.  Included is one front shock mount, one rear shock mount, four chassis wire clips, four 3x32mm caphead machine screws, and four 3x6mm buttonhead...

This is the Viper Scale Racing Viper V Gold .010" Pro Series Pickup Springs (5 pr) Gold springs typically are a tad stiffer than the non plated springs of the same wire size. We treat the gold springs as an in-between tension. Which for example a .010...

This is the Viper Scale Racing Viper V Gold .009" Pro Series Pickup Springs (5 pr) Gold springs typically are a tad stiffer than the non plated springs of the same wire size. We treat the gold springs as an in-between tension. Which for example a .009...

This is the Viper Scale Racing Viper V3 Medium Magnet Clips (2 pcs) Viper V3 Magnet Clip (2) comes with 2 clips.   Note: If you are breaking clips during install/removal please watch the video

This is the Viper Scale Racing V3 Hybrid Brass Ultralight Weight Kit Looking to shave tenths and build a dominating 12V Brass car? The all-new V3 Hybrid Brass Traction Weights are engineered for serious performance. On our test track, these hybrids cut...

This is the Traxxas Inner Hardened Steel Upper Suspension Pins (4) This easy-to-install kit replaces the standard inner suspension pins your mini with premium hardened-steel pins for maximum strength and durability. Includes 3x45 mm pins (4).

This is the GPM Black 20CR Carbon Steel Front/Rear Differential Gear Set Made by 20Cr carbon steel to add greater durability. Suitable for stock differential Gear set. Replaces Stock Part# 10782 IncludesDifferential Gear set - 6pcsStainless Steel Pins 2...

This is the Spaz Stix Water Base Liquid Mask V2: 8oz Now Featuring an Ultra-Fast Drying, Easy-to-Use Formula!Take your paint projects to the next level with our Liquid Mask, the ultimate sprayable and brushable masking solution designed for precision,...

This is the Viper Scale Racing Viper 7T Pro Pinion Gear (10 Pack) Viper high performance 7 Tooth Pinion gear. All new profile and tooth geometry. Whisper quiet and smooth. Great mesh with most crowns on the market. Fits: 1.5 mm Shaft. (Standard...

This is the Viper Scale Racing Viper 7T Pro Pinion Gear Viper high performance 7 Tooth Pinion gear. All new profile and tooth geometry. Whisper quiet and smooth. Great mesh with most crowns on the market. Fits: 1.5 mm Shaft. (Standard HO) Features All...

This is the Viper Scale Racing Viper 23T Crown Gear VSR high performance 23 Tooth crown gear. All new profile and tooth geometry. Whisper quiet and smooth. Great mesh with most pinions on the market. Features Radiused profile Chamfered on both sides to...

This is the Viper Scale Racing Viper 22T Crown Gear (10 Pack) VSR high performance 22 Tooth crown gear. All new profile and tooth geometry. Whisper quiet and smooth. Great mesh with most pinions on the market. Features Radiused profile Chamfered on both...

This is the Viper Scale Racing T-Boss (1) Billet Delrin T boss for all slot cars. This T boss replaces worn and wobbly stock gear bosses. The precision CNC machined T boss keeps gear mesh true and consistent resulting in faster lap times, less wear and...

This is the Viper Scale Racing Stainless 7T FL Pinion Gear (Neo) The all new Stainless 7T FL (Full length) pinion gear is the last metal pinion you will ever buy. Machined from High strength Stainless steel and paper lapped. These are the best of the...

This is the Viper Scale Racing Rear Axle Retainer Boss (2 pc) Billet Delrin rear axle retainer boss for all slot cars. This is a must have when it comes to controlling gear mesh. The precision CNC machined retainer boss keeps gear mesh true and...