This is the Associated 7448 Rear Suspension Arms. This is Team Associated part number 7448This part fits the following vehicles:RC10T4RC10T4.1RC10T4.2RC10T4.3SC10SC10.2SC10.3 JRTSC10.3 Lucas OilSC10B

This is the Traxxas BFGoodrich Mud-Terrain Tires on SCT Split Spoke Chrome Red Beadlock Wheels for 4WD F/R, 2WD Rear Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome Split-Spoke SCT wheels with red...

This is the Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware).  Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to...

This is the Traxxas Chrome Front Bumper and Hardware for the Revo, 1/10 E-Revo, and 1/10 Summit trucks.IncludesBumper and MountTwo 4x10mm Button Head Cap ScrewsTwo 3x25mm Button Head Cap ScrewsFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3...

This is a pair of RPM Chrome Rear Revolver 2.2" Wheels for the Traxxas Electric Rustler and Electric Stampede.Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! The Revolvers for 1/10th scale trucks are...

This is the RPM Blue Rear Bumper for the Traxxas 1/10 Slash 4x4 short course trucks.The 4x4 version of the Slash is another awesome creation from the minds at Traxxas but with a little help from RPM, we’ve made it even better! Our new rear bumper is...

This is the RPM Black Front Shock Tower for Traxxas Slash 4x4, Stampede 4x4, 1/10 Rally, and Telluride vehicles. This replaces the stock Traxxas part #6839.RPM is proud to introduce our rear shock towers for the Traxxas Slash 4x4, Stampede 4x4,...

These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm. Replacement Big Bore Shock retainer set features upper and lower spring retainers (2), and spring pre-load...

This is the new Castle Creations Sidewinder SV3 Waterproof Electronic Speed Control. The Sidewinder is perfect for 1/10th off-road, on-road, and rock crawlers with up to 3S LiPo battery packs.Castle’s Sidewinder ESC, the leading 1/10th scale sport...

This is the 45T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorSpecificationsOuter Diameter: 24.75mm (0.97")Inner Diameter: 5.5mm (0.22")Width: 7mm (0.28")

This is the Wire Retainer/Gear Cover for use with many Traxxas vehicles using the TQi telemetry system, including the Bandit, E-Maxx, Rustler, Slash 2WD, Stampede 2WD, Stampede 4x4, and X-Maxx.FeaturesPlastic constructionBlack in colorIncludesWire...

This is the Pro-Line Power Stroke Shock Plastic and Rebuild Kit for use on the Powerstroke Shocks for the Traxxas Slash. This includes parts to rebuild two shocks. Features Nylon construction Black in color Direct replacement parts...

These are Traxxas 3x30mm Button Head Screws (6). Features: Steel construction Black in color Button head design Includes: Six 3x30mm button head screws Specifications:Length: 1-3/16" (30mm)Diameter: 1/8" (3mm)

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

This is the Robinson Racing Extra Hard 22-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...

These are the Integy Silver Aluminum Front Upper Links for the Traxxas Stampede, Rustler & Slash FEATURES Aluminum and black plastic construction Silver in color INCLUDESTwo front upper links REQUIRESInstallation on the vehicle SPECSLength: 3.03"...

This is the Integy Type II Aluminum Front Shock Tower for the Traxxas Stampede, Rustler and Slash FEATURES Aluminum construction Anodized blue in color INCLUDESOne Type II Aluminum Front Shock Tower REQUIRESInstallation on the vehicle SPECSLength:...

This is a set of four Integy 17mm Aluminum Extended Wheel Hex Hubs for the Traxxas Electric 2WD Stampede, Rustler, and Slash. These allow you to run wheels with a standard 17mm hex (not splined) on these vehicles.FeaturesAluminum constructionGun metal...

This is a stock replacement FRONT shock tower. SPECS:Height: 2 3/4"Thickness: 1/4"Width at base: 2 3/4"Width at top: 2" INCLUDES:(1) Front shock tower Replacement Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaDrag SlashFord F-150...

This is the Traxxas 58mm Camber Links, Turnbuckles (Assembled with Rod Ends and Hollow Balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. Replacement Part ForFord F-150 Raptor R 4X4Hoss 4X4 VXLJatoRustler 4X4 UltimateRustler 4X4...

This is the Aluminum Engine Mount for the Traxxas 3.3 T-Maxx. FEATURES:Replaces damaged engine mounts INCLUDES:Engine mount, eight 3x10mm socket head screws, eight flat washers and eight lock washers REQUIRES:2mm hex wrench SPECS:Length: 2.3"  (57...

These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color INCLUDES:Four 4mm x 7mm x 2.5mm White Plastic Bushings REQUIRES:Assembly onto Vehicle

This is a set of Hitec Servo Horn Screws (10) for Hitec Metal Geared Servos.  This includes five 2.6x8mm Phillip-head screws and five 2.2x5mm Phillip-head screws.  These are a great item to keep with you at the flying field or the track...

This is the Hitec HS-755HB 1/4 Scale Karbonite Gear Servo with the Universal Connector.  The universal connector means that this servo will work with all current JR, Futaba, Hitec, and Airtronics Z receivers and wiring. This servo has the...

This is a Two-Speed Close Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 40T 2nd speed gearOne 13T/16T input gearOne screw pin REQUIRES:Installation...

This is a set of replacement Traxxas Front Left Upper and Lower Suspension Arm Set  for the Revo 2.5 and 3.3 trucks.  If you need the right side as well, search our store for TRA5331.  It is a good idea to have these on...

This is a pair of Traxxas 5x10x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2- Bearings Specs5x10x4mm

This is the Viper Scale Racing Red Threadlocker (High) Threadlocker is a great way to keep screws or shaft to stay in place semi permanently. Red is high strength and can be used on shafts, retainers rims, pinions and other things you want locked in...

This is the Viper Scale Racing Blue Threadlocker (Medium) Threadlocker is a great way to keep screws or shaft to stay in place semi permanently. Blue is medium strength and can be used on shafts, retainers rims, pinions and more.  

This is the Traxxas Steel CV Driveshaft Assemblies & Drive Cups (4) Mini Slash 4X4 steel constant velocity shafts offer the ultimate in torque handling and efficient power transfer for high-power brushless applications. On the axle side, snap rings...

This is the Viper Scale Racing Track Lane Paint Markers (4 Colors) Elevate your AFX track with the Viper Scale Racing Track Lane Paint Markers! This set of four high-quality markers comes in the most popular lane colors: Red, White, Blue, and Yellow...

This is the RC Screwz Traxxas Stampede 2WD BL-2S (36354-4) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Bellcrank Steering Assembly Aluminum Bellcrank AssemblyEnhance the steering precision, strength, and looks of your Maxx Slash with this aluminum bellcrank steering assembly. Machined from tough...

This is the Traxxas 6061-T6 Aluminum (Gray-Anodized) Bellcrank Steering Assembly Aluminum Bellcrank AssemblyEnhance the steering precision, strength, and looks of your Maxx Slash with this aluminum bellcrank steering assembly. Machined from tough 6061-T6...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Bellcrank Steering Assembly Aluminum Bellcrank AssemblyEnhance the steering precision, strength, and looks of your Maxx Slash with this aluminum bellcrank steering assembly. Machined from tough 6061-T6...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Bellcrank Steering Assembly Aluminum Bellcrank AssemblyEnhance the steering precision, strength, and looks of your Maxx Slash with this aluminum bellcrank steering assembly. Machined from tough...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Steering Servo Horn Increase the precision and durability of your Maxx Slash with this aluminum servo horn. Machined from tough 6061-T6 aluminum, the servo horn adds colorful style with a brilliant...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Steering Servo Horn Increase the precision and durability of your Maxx Slash with this aluminum servo horn. Machined from tough 6061-T6 aluminum, the servo horn adds colorful style with a brilliant...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Steering Servo Horn Increase the precision and durability of your Maxx Slash with this aluminum servo horn. Machined from tough 6061-T6 aluminum, the servo horn adds colorful style with a brilliant...

This is the Traxxas 6061-T6 Aluminum (Gray-Anodized) Steering Servo Horn Increase the precision and durability of your Maxx Slash with this aluminum servo horn. Machined from tough 6061-T6 aluminum, the servo horn adds colorful style with a brilliant...