This is a pair of Traxxas Canyon Trail Tires Mounted on 2.2" Method 105 Black Chrome Beadlock Wheels with Black Rings. These come fully-assembled with foam inserts inside.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4...

This is the Hot Racing Adjustable Aluminum Servo Saver Steering Bellcrank for the Traxxas 2WD Slash, Rustler, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless versions.FEATURES:- Super-tough, fully adjustable servo saver bell crank-...

This is the Traxxas E-Revo 2 Rear Upper and Lower Bulkhead with 4x12mm Buttonhead Capscrews (6). These must be used with the #8622 chassis.Stock Replacement OnE-Revo 2.0

This is the Traxxas TRX-4 Rigid LED Lightbar Kit with Power Supply. Add this officially-licensed Rigid lightbar to your TRX-4 to light up the trail and take your scaler to the next level.

This is a pair of Traxxas X-Maxx Tires Pre-Mounted on Black Chrome Wheels. These tires are made of the tougher 8S-rated rubber compound. Add some high-impact style to your X-Maxx and XRT with these ready-to-mount wheels and tires. The wheels come...

These are the Traxxas 4-Tec 2.0 Front Response 1.9 Tires on Black Chrome Wheels (2). These are stock replacements for the 4-Tec 2.0 Ford GT, Mustang GT, and XL-5 brushed chassis.Stock Replacement On4-Tec 2.0 XL-5 Chassis4-Tec 2.0 Ford GT4-Tec 2.0 Ford...

This is the Traxxas 4-Tec 2.0 Chassis. This is used in both the Ford GT and Mustang GT versions.Fits4-Tec 2.0

These are the Hot Racing Blue Aluminum Hinge Pin Capture Bushings for the Traxxas X-Maxx 6S and 8S trucks.FEATURESReplace worn or damaged hinge pin capture bushingsCNC aluminum constructionINCLUDESFour Hinge pin capture bushingsREQUIREMENTSInstallation...

This is the Hot Racing Black Aluminum Rear Body Mount Post Set for Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will fit brushed and VXL brushless models of these cars.FEATURES:CNC machined aluminumBlack anodized finishYOU WILL RECEIVE:One...

This is the Hot Racing Black Aluminum Rear Shock Mount for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. This will work on 1/16 brushed and VXL brushless trucks.FEATURES:CNC machined of 6061-T6 aluminumBlack anodized finishYOU WILL RECEIVE:One...

These are the Hot Racing Super Duty Steel CV Drive Shafts and 12mm hexes for Traxxas 1/16 E-Revo VXL trucks. These can be used on the front and rear of the 1/16 E-Revo VXL.FEATURES:CNC construction of #45 steel.Jet black finish with Red aluminum capture...

These are the Hot Racing Aluminum Splined 17mm Hex 6mm Offset Hubs for the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +6mm per side.FEATURES:- Black anodized CNC machined aluminum hex adapter-...

This is a pair of Traxxas X-Maxx GTX 1.538 Rate Springs. These come in packages of two springs. This is a firmer spring rate than stock.Features Steel construction Firmer than stock 1.055 rate Natural (unpainted) finish Includes: Two 1.538 Rate...

This is the Robinson Racing Extra Hard Steel 13-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...

This is the Robinson Racing Extra Hard Steel 11-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...

These are the Traxxas X-Maxx Front and Rear Body Mounts with Screws.FeaturesOne-piece molded composite plastic constructionFastens front and rear of body to chassisIncludesOne each Front and Rear Body Mounts with Mounting Screws

This is the Traxxas Spur gear, 54-tooth. This is Traxxas part number 7591Part Number: 7591 / TRA7591FitsLaTrax RallyLaTrax SSTLaTrax TetonMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas Rocker arm post, steel (4). This is Traxxas part number 7155Part Number: 7155 / TRA7155Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16...

This is the Traxxas Tires & wheels, assembled, glued (split-spoke, black chrome wheels, slick tires (S1 compound), foam inserts) (front) (2). This is Traxxas part number 6479 Specially developed for high-speeds these belted front slick tires resist...

This is a pair of Traxxas Maxx 6.3" Tires Pre-Mounted on Geode Chrome Wheels with a 17mm Splined Hex.FeaturesNylon constructed Geode Chrome WheelsPre-Mounted Maxx 6.3" TiresIncludes: Two Maxx Tires premounted on Geode Chrome WheelsOptional: Sidewall...

This is the Traxxas 14T Pinion Gear 0.8 Mod 32P for 5mm Shaft, with Set Screw 14-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear...

This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro, and T-Maxx 3.3.

This is a package of six Traxxas 4x6mm Button-Head Hex Machine Screws with ThreadlockFits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

These are the Traxxas PTFE-coated washers (5x11x.5mm) for use with self-lubricating bushings.Features:Made of fiberBlack in colorWears better than metalIncludes:(6) small washers(6) large washersSpecifications:Small:Outer Diameter: 8mmInner Diameter:...

These are the RPM Black Short Rod Ends (12) for 1/10 Traxxas vehicles. These replace Traxxas part TRA5347. RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash 4x4, Summit,...

These are the RPM Green Front Suspension A-Arms for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Nitro Slash vehicles.RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest...

This is the RPM Blue Front Low-CG Bulkhead for Traxxas Slash 4x4 Ultimate, 1/10 Rally, and Slash 4x4 trucks with the low-CG conversion. Adding these to your truck will increase durability and simplify maintenance due to the two-piece design.Designed from...

This is the Team Integy Front Progressive Spring Set for use on the Traxxas Slash, Stampede 2WD, and Electric Rustler vehicles. FEATURES Steel construction INCLUDES Two Front Red Springs Two Front Orange Springs Two Front Black...

This is the Traxxas Tires on 3.8" Hurricane Chrome Wheels The massive 6.3” Maxx wheel and tire combo deliver incredible grip off-road and increased ground clearance to overcome deep ruts and huge obstacles. They come pre-glued to 3.8" chrome...

These are the replacement body mounts for the Traxxas Stampede truck. They are constructed of black plastic and are the posts that the lexan truck body attaches to. Includes:One front body mountOne rear body mount

These are the Traxxas Button Head 3x40mm Screws (6). Features: Metal construction Black in color Includes: Six 3x40mm buttonhead hex machine screws

These are the Long Half Shafts for use on the Traxxas Summit Truck RTR. FEATURES Plastic construction Black in color INCLUDESTwo Long Half Shaft Sets, internal splined half shafts and external half shafts with glued boot REQUIRESInstallation...

These are the Traxxas Blue Aluminum 17mm Splined Wheel Hubs and Nuts for vehicles such as the T-Maxx 3.3, Revo 3.3, E-Revo Brushless, E-Maxx Brushless, Summit, Slayer Pro, and others.Newly designed 17mm racing hubs and wheel nuts incorporate new...

This is the Front Plastic Skidplate for the T-Maxx 3.3. FEATURES Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color INCLUDESSkidplate and stainless steel plate REQUIRESInstalling on chassis with four 3x12mm...

This is an optional Traxxas Wheelie Bar for all Traxxas T-Maxx and E-Maxx series vehicles. This can also be used with Stampede 4x4 trucks using the stock rear bumper/wheelie bar mount (part 6777).FeaturesConstructed of hardened plastic, black in...

This is the Traxxas Center Driveshafts (1) Front (1) Rear for the Traxxas E-Revo, Summit and E-Revo Brushless Edition Features Heavy-duty construction for total torque transfer Fully assembled and ready to install U-joint pins are captured to prevent...

This is the Team Integy Blue Aluminum Heavy-Duty Wheelie Bar for the Traxxas Revo 2.5 and 3.3 trucks.  This looks awesome, and it helps prevent your high-performance Revo truck from flipping over backwards onto its lid.  This prevents damage to...

This is the Traxxas 72T Spur Gear for the Nitro Rustler. FEATURES:Made of black nylonUses friction pegs INCLUDES:Traxxas 72T Spur Gear for the Nitro Rustler SPECS:72 tooth

This is a pair of RPM Blue Black Suspension A-Arms for the Traxxas Jato 2.5 and 3.3 trucks. These are very strong, and they include a lifetime warranty through RPM against breakage. If you break one under normal use, just send it in to RPM for a free...

This is an RPM Blue Upper and Lower Suspension A-Arm set for the Traxxas T-Maxx 2.5, 2.5R, 3.3, as well as the E-Maxx trucks.  These will also fit other trucks that came with the WideMaxx suspensions such as the SportMaxx...