This is a set of four Traxxas Green Body Clip Retainers. These body pin retainers are perfect for keeping your clips from going missing when prepping your boat at the lake.FitsDCB M41Spartan

This is a pair of Traxxas Blue Beadlock Style Sidewall Protector with Screws for use with Traxxas Geode 3.8" Wheels.Includes:Two Blue Sidewall ProtectorsTwenty Four 2x6mm ScrewsSpecificationsInner Diameter: 3.1" (79mm)Outer Diameter: 3.9" (100mm)Fits...

This is the Traxxas Engine Connecting Rod for TRX 2.5, 2.5R, and 3.3 Nitro Engines.FeaturesAluminum constructionPre-installed bushingSpecificationsLength: 37mm (1.46")Thickness: 3mm (0.12")Fits:Jato 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo 2.5 & 3...

This is the Traxxas T-Maxx 2.5 Battery Box with Adhesive Foam Chassis Pad. This fits the T-Maxx 2.5, Sportmaxx, and S-Maxx trucks.FitsS-MaxxSportmaxxT-Maxx 2.5

This is the Traxxas Blue Wheelie Bar Mount with Hardware for Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.IncludesOne wheelie bar mountHardwareInstructions Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacRustler VXLRustler...

This is the Traxxas XL-2.5 Waterproof Electronic Speed Control (ESC) with Low-Voltage Detection (LVD), pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-2.5 Electronic Speed Control delivers smooth throttle...

This is pair of Traxxas Splined Steel Constant-Velocity Driveshafts for use on electric Rustler and Stampede 2WD trucks. This will fit the XL-5 and VXL versions.FeaturesSteel constructionConstant velocity designFully assembledFitsCraniacRustler...

This is the Traxxas Machined-steel CV stub axle includes cross pin and drive pinIncludes:One CV Style Stub AxleOne Cross PinOne Drive PinOne Set Screw

These are the RPM Chrome Revolver 2.2/3.0 Front Wheels for the Traxxas Slash 2WD Electric Short Course trucks with Spline Drives. These feature splined drives instead of hexes for incredible strength. Spline adapters are included.The most popular RPM...

These are the RPM Adjustable Rear Body Mounts for Traxxas Slash 2WD, Nitro Slash, Stampede 2WD XL-5 & VXL, and Nitro Stampede vehicles. See Tech Notes at bottom for adjustability info on vehicles other than Slash 2WD.Immediately after releasing our...

These are the RPM Red Rear Upper and Lower Suspension A-Arms for the Traxxas 1/16 E-Revo and 1/16 Grave Digger vehicles.Similar to RPM front A-arms (#80694), our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear...

These are the RPM Black Long Rod Ends (12) for 1/10 Traxxas vehicles. This replaces Traxxas part TRA5525. RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash 4x4, Hoss 4x4,...

This is the Pro-Line PROTOform 1971 Pontiac Firebird Trans Am RC Car Clear Body (unpainted). The body is supplied clear (unpainted), but is shown painted in the image to show the shape of the body. This officially licensed product is produced in genuine ...

This is the Traxxas Chrome LED Lightbar (4 clear lights) for the 1/10 Summit Truck.  Kick up your Summit's candlepower! Four bright-white LEDs with beautiful mirror-chrome reflectors combine with Summit's stock bumper lights to blaze the darkest...

This is the Castle Creations Castle BEC - Battery Eliminator Circuit.  This works with 2S to 6S LiPo batteries. Features Eliminates the need for a separate battery for the receiver and servos OverviewOur Battery Eliminator Circuit is a little...

This is the Traxxas 17mm Blue Aluminum Wheel Hex Hub set (4) for the Slash 2WD, Stampede 2WD, and Rustler vehicles. FEATURES: Aluminum construction Anodized blue in color INCLUDES:Two 17mm Splined Wheel HubsTwo Short Wheel NutsTwo Long Wheel...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws Replacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBlastDrag Slash 1967 Chevrolet...

This is the Robinson Racing Extra Hard 20-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...

This is the optional Sway Bar Kit for the Traxxas Slash 4x4, Stampede 4x4, and 1/10 Rally vehicles. Fine-tune your model for high-grip racing with this track-tested sway bar set. Sway bars reduce chassis roll and increase corner speed on high-traction...

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4. Replacement left and right caster blocks (c-hubs) Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4 VXLSlash 4X4Stampede 4X4 VXLStampede 4X4 Accessory...

These are the replacement GTR Shock Retainers for the Traxxas Nitro Revo Monster Truck. FEATURES:Nylon ConstructionBlack in Color INCLUDES:Two Black Nylon GTR Shock CapsTwo Black Nylon GTR Spring AdjustersTwo Black Nylon GTR Spring RetainersTwo Black...

This is the optional .8 Metric Pitch 62 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES:Nylon construction, black in color.8 metric pitch INCLUDES:One 62T 0.8 metric pitch spur gear REQUIRES:Installation on the vehicle SPECS:Diameter: 2"...

This is the Traxxas Adjustable Rear Brake Kit for the Revo. FEATURES:Direct drop-in for the Revo 3.3, Revo 2.5Rs require slight chassis modification, older Revos require the latest gearbox housing-(TRA5391X) for proper installationFor use with Revos...

These are the Lower Suspension Arms for the T-Maxx 3.3. FEATURES:Helps to support axle carriers and shocksBlack in color, constructed of hardened plastic INCLUDES:One Right and one Left Lower Suspension Arm for the T-Maxx 3.3 REQUIRES:Fastening to...

This is a set of six Traxxas 3mm x 18mm Button-Head Machine Screws for the Jato 2.5 and 3.3 trucks. Replacement part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLJatoMaxxRustler 4X4...

This is the Integy Heavy-Duty Blue Aluminum Rear Bumper for the Traxxas T-Maxx and E-Maxx trucks. It will fit all versions of both the E-Maxx and T-Maxx. This heavy-duty bumper looks awesome, and it is very strong. It looks great on show trucks, but...

This is a Traxxas Replacement Suspension Hinge Pin Screw Set for all versions of the Traxxas T-Maxx and E-Maxx trucks.  These are made of durable steel. Fits Traxxas T-Maxx .15, 2.5, 2.5R, 3.3 (both model 4908 & 4909),...

This is an Integy Blue Aluminum Front Skid Plate for the Traxxas Revo 2.5, 3.3, E-Revo, E-Revo Brushless, Summit, and Slayer trucks.   These look great and are much stronger than stock.  These are a must have item for all Revo owners.

This is the SRT SP-MX082 Program Box Functions:1. Servo parameters setting2. Connect the computer to set the servo3. Servo testing Features Program box SP-MX082 has built-in high-performance 32-bit microprocessing, small size, simple and convenient...

This is the Traxxas Pro Scale Sand Car Red Underbody LED Light Kit Give your Pro Scale Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Includes: 3-Volt Power Supply,...

This is the Traxxas Pro Scale Sand Car Orange Underbody LED Light Kit Give your Pro Scale Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Includes: 3-Volt Power...

This is the Traxxas Pro Scale Sand Car Green Underbody LED Light Kit Give your Pro Scale Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Includes: 3-Volt Power...

This is the Traxxas Pro Scale Sand Car Blue Underbody LED Light Kit Give your Pro Scale Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Includes: 3-Volt Power Supply,...

This is the Viper Scale Racing Carbon Fiber HO Scale Car Display Block Made from Carbon fiber, the display block not only looks great but also comes with optional steel screws that you can screw in from the top or bottom that allow the car to sit up off...

This is the Hot Racing Traxxas Aluminum Double Trim Tab Adjusters for Traxxas Spartan and Spartan SR boats. These are functional, durable, and look awesome! FEATURES:- CNC machined aluminum construction- Anodized blue for durability, corrosion...

This is the Traxxas TRX-4M Portal Axle Kit with Front and Rear Axle Assemblies TRX-4M Portal Axle KitA New Level of Off-Road CapabilityJust like the larger TRX-4, new TRX-4 portal axles increase your off-road capability by raising the vehicle at the...

This is the Savox SC-0251MGP Larger High-Torque Standard Digital Metal Gear Servo (0.18sec/222oz @ 6.0V) The Savox SC-0251MGP is a high torque, metal-geared, digital servo which is suitable for many applications . "Plus" series servos feature Soft Start...

This is the GPM Racing Brown Aluminum Rear Suspension Arm Set for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance.These are upgraded replacements for stock Traxxas...

These are the GPM Racing Green Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and look awesome!These fit in place of...

This is the GPM Racing Gunmetal Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. The...