This is the GPM Racing Green Aluminum Front Clipless Body Post Mount for Traxxas E-Revo 2.0 VXL Brushless Trucks. These are made of 6061-T6 aluminum for incredible durability and great looks.This fits in place of the front mount in Traxxas part 8614.

This is the Tekin RX8 Gen3 Brushless Dual Mode ESC Combo with the T8 Gen3 4030 1900kV motor.Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors...

These are the RPM Pink Revolver 2.2/3.0 Wheels for the front/rear of Traxxas 1/10 Slash 4x4, and rear of Slash 2WD Short Course trucks. These feature splined drives instead of hexes for incredible strength. Spline adapters are included.These could also...

This is the Traxxas 4-Tec 2.0 Front and Rear Sway Bar Kit with Adjustable Linkage. Improve the handling of your street machine with this sway bar set.Accessory Part For4-Tec 2.0 VXL4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2.0 Ford GT

This is the Traxxas TRX-4 Ford Bronco Chrome Side Trim, Retainers, LED Lens and 2.6x8 Screws (24).Stock Replacement OnTRX-4 Ford Bronco

This is the Traxxas 15-Tooth 1.0 Mod Machined Steel Pinion Gear with Set Screw for 5mm Shaft Motors. 15-tooth machined pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of...

This is the Traxxas 22-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...

These are the RPM Green Long Rod Ends (12) for 1/10 Traxxas vehicles. These are direct replacements for TRA5525 rod ends.RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash...

These are the Traxxas 4-Tec 2.0 Rear 1.9 Response Extra Wide Rear Tires. These fit the Traxxas 8372 wheels. These are stock replacement tires for the 4-Tec 2.0 Ford GT and Mustang GT cars. These are only recommended for the XL-5 brushed vehicles.Stock...

These are the Traxxas TRX-4 Crawler Front and Rear Inner Fenders and Rock Light Covers. This includes two front inner fenders, two rear inner fenders, and 8 rock light covers.FitsTRX-4Includes2 Front Inner Fenders2 Rear Inner Fenders8 Rock Light Covers

This is the Traxxas 13-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 13-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-tune the performance...

These are the Traxxas 6x13x5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate...

This is the Traxxas Spur gear, 50-tooth (1.0 metric pitch)50-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different...

This is the Traxxas E-Maxx Brushless Clear Body with Decal Sheet. The body is supplied pre-cut, requiring the paint application.

These are the RPM Blue Rear Bulkheads for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.RPM Rear Bulkheads for the T-Maxx & E-Maxx, combined with RPM front...

This is the Traxxas Center Driveshaft 6061-T6 aluminum (blue-anodized) (214mm) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front...

This is a Team Integy Aluminum Motor Heatsink with Cooling Fan (Black) for the Traxxas Slash 2WD, Stampede 2WD, Rustler and Bandit vehicles. This will only fit XL-5 versions.Heat is the enemy, especially when it comes to electric motors. Keep your...

This is a set of Traxxas Center Front and Rear Half Shafts for the 1/16 Slash and E-Revo vehicles. FEATURES: Nylon construction Black in color INCLUDES:One Front Center Half ShaftOne Rear Center Half ShaftFour U-Joints

This is the Traxxas ProGraphix Body with Decals for the Jato 3.3. Features Graphics are printed, requires paint & final color application Overview With the ProGraphix process, you will never see bleeding paint or over-sprays that need to be covered...

These are the axle housings (or hub carriers). The housings are molded of black nylon. Included(2) Standard rear stub axle carriers Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4 VXLRustler 4X4Slash 4X4 VXLSlash...

This is a set of Traxxas E-Maxx Brushless and 16.8V Steel Center CV-Driveshafts with Inner and Outer Dust Boots. These are genuine Traxxas upgrade parts, so you know they will fit perfectly, and they will be made to withstand just about anything you can...

This is the Traxxas 2056 High-Torque Waterproof Servo   High-Torque Waterproof Servo 80 oz-in torque Transit time 0.23 sec/60°   Replacement Part For Bandit BIGFOOT No. 1 Officially Licensed Replica Bigfoot Officially Licensed...

This is a Traxxas Jato 2.5 and 3.3 Chassis Top Plate. This holds the receiver and throttle servos. FEATURES:Nylon construction, holds receiver and throttle servoBlack in color INCLUDES:One Chassis Top Plate.

This is a stock replacement telescoping antenna from Traxxas.  This works with all current Traxxas radios, including the TQ2 and TQ3 transmitters.

This is a pair of 6.4 rate (purple) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small purple square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the...

This is an Integy Silver Aluminum Front Skid Plate for the Traxxas Revo 2.5, 3.3, E-Revo, E-Revo Brushless, Summit, and Slayer trucks.  These look great and are much stronger than stock.  These are a must have item for all Revo owners.

This is the Traxxas RXT 2.8" Charcoal Gray and Black Chrome Wheels & Gravix Tires (2) Tires & wheels, assembled, glued (2.8") (RXT charcoal gray & black chrome wheels, Gravix tires, foam inserts) (4WD electric front/rear, 2WD electric front...

This is the Traxxas TRX-4 Nissan Pathfinder LED Light Kit The TRX-4 Nissan Pathfinder LED Light Kit takes scale realism to the next level with working headlights, tail lights, and side markers. Fully waterproof and built Traxxas-Tough, the LED light kit...

This is the Traxxas Mini Slash 4X4 LED Light Kit The Mini Slash 4X4 LED light kit is built Traxxas Tough, with factory fit and finish for easy installation. The kit includes a front roof light bar with white forward-facing LEDs, and rear-facing light...

This is the Auto World Six Car 1/64 Scale Interlocking Display Case Features Displays six vehicles Front panel opens for easy access Interlock more cases as your collection grows Mirror back and wall-mounting hardware included Scale 1/64

This is the Traxxas Pro Scale Sand Car LED Rock Light Kit Light up your Pro Scale Sand Car with this LED rock light kit. Lights mount to the shock body with collars for easy installation. Includes: Collars, Wiring Harness, and Mounting Hardware...

This is the Traxxas Pro Scale Sand Car Complete LED Light Kit Funco Sand Car Complete Pro Scale LED light set. Includes: Front Light Bar, Rear Light Bar, Side Lights (Left & Right), and High-Voltage Power Amplifier Accessory Part ForPro Scale Sand Car

This is the Traxxas Ford Raptor R 4X4 Complete (Orange Fox) Body Is it time to replace your Ford Raptor R body or upgrade to an all new look? Ford Raptor R clipless bodies come fully painted with pre-applied decals. Raptor R bodies come fully-assembled,...

This is the Traxxas Ford Raptor R 4X4 Complete (Special Edition Fox) Body Is it time to replace your Ford Raptor R body or upgrade to an all new look? Ford Raptor R clipless bodies come fully painted with pre-applied decals. Raptor R bodies come...

This is the Traxxas Ford Raptor R 4X4 Complete (Fox) Body Is it time to replace your Ford Raptor R body or upgrade to an all new look? Ford Raptor R clipless bodies come fully painted with pre-applied decals. Raptor R bodies come fully-assembled,...

This is a pair of Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires on Black Wheels with Blue Beadlock-Look. These can be used on the rear of 2WD trucks, or the front and rear of 4x4 trucks. The wheels have a 12mm hex.Fits: 12 mm hex, 4WD front or rear, 2WD...

This is a pair of Pro-Line Jaeger HP 2.8" BELTED Front/Rear MT Tires MTD 12mm/14mm Black Raid Wheels Jaeger HP BELTED 1/10 Monster Truck TireThis is a pair of pre-mounted Jaeger HP 2.8" BELTED All-Terrain Tires Mounted on Raid Black Removable Hex Wheels...

This is the Traxxas Shifting Servo (For #9891 Transmission) Add convenient remote-shifting capability to your TRX-4M high/low two-speed transmission with this shifting servo. The servo replaces the manual shifting lever on the transmission and plugs into...

This is the Pro-Line Pre-Cut Brute Bash Armor Black Body for X-MAXX Black Brute Bash Armor BodyThis is a Pre-Cut Brute Bash Armor Black Body for X-MAXX. Pro-Line has developed the Ultimate Bash body for your X-MAXX - the pre-cut Brute body featuring...

This is the Traxxas Traxxas Underbody LED Light Kits (WHITE) 4-Tec 2.0 White Underbody LED Light KitGive your 4-Tec 2.0 extra style points with this underbody LED light kit. Perfect for track competitions or parking lot hooning, the underbody LED light...