This is the Lectron Pro Dual Port 100W LiPo, LiFe, LiHV, NiMH, and NiCd Charger for use with AC or DC power input. With an output of 50W per channel, this charger is an economical way for most hobbyists to get a couple packs charged quickly. This...

This is the GPM Racing Heavy Duty Steel Front CVD Driveshaft Set with Stub Axles for Traxxas Unlimited Desert Racer trucks. These beefed up shafts are 6.5mm thick at the center versus 4.5mm stock, and HD steel stub axles for extreme durability.This is an...

This is the GPM Racing Red Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance. Stainless steel mounting hardware is included.These are an...

This is the Traxxas TRX-4 Expedition Rack and Mounting Hardware for use with the TRX-4 Sport body.

This is a pair of Traxxas Unlimited Desert Racer 139mm GTR 1.250 Rate Blue Stripe Progressive Shock Springs.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 12-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...

This is a pair of Traxxas Blue Rear Springs for use on XXL Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD Unassembled KitSlash VXLSlashStampede 4X4 VXLStampede...

This is the Hot Racing Hardened Steel 48-Pitch 1/8" Bore Pinion Gear Set. This set includes a 24-tooth, 26-tooth, 28-tooth, and 30-tooth pinion gear.This set of gears is great for Traxxas Rustler XL-5, VXL, Stampede 2WD, Slash 2WD, HPI Savage XS, and...

This is the Hot Racing Aluminum Dual Water Pick-up Rudder Blade for the Traxxas DCB M41 Catamaran Boat. Add this to your boat for improved cooling options.FEATURES:- CNC machined billet aluminum construction- Dual water pickup for additional cooling-...

This is the Traxxas Cush Drive Transmission Input Shaft.Replacement part forX-Maxx XRT

This is the Traxxas X-Maxx ProGraphix Body with Decals. The body comes with graphics pre-printed, and allows you to spray one final color for a professional finish, even for beginners!FeaturesTrimmed with printed graphics applied (requires final color ...

This is the Traxxas X-Maxx Body with Masks & Decals (clear, requires painting). Set your X-Maxx apart from others with a custom paint scheme using this body!FeaturesMolded from clear polycarbonate plasticAllows X-Maxx drivers to create their own custom...

This is the Traxxas XO-1 Wing (Exocarbon) with Wing Mounts (2) and Washers (2) The XO-1 Exo-Carbon wing adds a glossy, high-tech carbon-fiber look to your supercar. The innovative Exo-Carbon finish forms a tough skin over the standard composite wing...

This is the Traxxas XO-1 Wing Includes Wing Mounts (2)Washers (2)Accessory Part ForXO-1

These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD...

This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...

This is the RPM Black Front Bumper for Traxxas 1/16 E-Revo Trucks. This fits brushed and VXL brushless trucks.At just over 2'' wide, stock 1/16th scale Traxxas Mini E-Revo bumpers just aren't large enough to provide any protection to the front of these...

These are the RPM Black Adjustable Front/Rear Body Mounts for Slash 4x4, 1/10 Rally, or Stampede 4x4. RPM Adjustable Height Body Mounts for the Traxxas Slash 4x4 are designed to give you optional body height positions where stock left you none.Our...

This is the RPM Black Mock Intake and Supercharger Blower Set, designed to fit most 1/8 and 1/10 scale bodies. Are you into scale realism on your favorite R/C rides? Perhaps you just dropped some brushless / LiPo power in your ride and want to show off...

This is the Traxxas Low Center of Gravity (Low-CG) Chassis Conversion Kit for the Slash 4x4 trucks.  Lower your CG, increase corner speed, and lower your lap times!  Performance-proven with the Slash 4X4 Ultimate and 1/10 Rally models, Traxxas...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear differentials Includes:One Rear Differential Ring GearOne...

This is the Robinson Racing Gen3 Slipper Kit with 54-Tooth Steel Spur Gear for the Traxxas Stampede 4x4 VXL trucks.GEN3 Slipper Units will not fail under the enormous load conditions of today's high-performance engines.  The new GEN3 Slipper Unit is...

This is the Traxxas Replacement O-ring Header Gasket for the Traxxas 2.5, 2.5R, and 3.3 Engines. This is located on the header of the engine. Features: Red silicone construction. Includes: One 12.2x1mm o-ring

This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...

This is the RPM Black Sealed Gear Cover for Slash 2WD, Stampede 2WD, electric Rustler, and Bandit vehicles. These are recommended for spur gears up to 87-teeth.The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd have several...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively stiffer rate to absorb hard landings...

This is a pair of RPM Black Front Upper and Lower Suspension A-Arms for the Traxxas 1/16 E-Revo vehicles. These will work on both the brushed and VXL brushless versions.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, we immediately started...

This is the Traxxas TRX 3.3 Racing Engine with Pull Start.  This will give your Revo, T-Maxx 2.5, or Jato an unbelievable boost in performance.  This is a must have upgrade.  You can also use this with the factory EZ-Start. ...

This is the Integy 7-Piece Ti-Nitride Hex Wrench Set. This set of wrenches looks very sharp, and the Ti-Nitride tips are precisely made. The tips are replaceable should one of them ever get worn or damaged. We have replacement tips available...

This is an Integy 6-Piece Titanium-Nitride Hex Wrench Set. These wrenches are color coded, and the 6 sizes are 0.05" 1/16" 3/32" 5/64" 2.5mm and 1.5mm. These are very sturdy and convenient to use, and the tips have a high degree of...

This is the Viper Scale Racing .344 Razor Front Tires Razor front replacement tires. Sold in Pairs Recommended Size range below:Viper V1- .328-.350Storm- .345-.360G+ .344-.350Tyco 440X2 Narrow- .344-.350Mega G- .360Tyco 440×2 Wide pan .405

This is the Viper Scale Racing .350 Razor Front Tires Razor front replacement tires. Sold in Pairs Recommended Size range below:Viper V1- .328-.350Storm- .345-.360G+ .344-.350Tyco 440X2 Narrow- .344-.350Mega G- .360Tyco 440×2 Wide pan .405

This is the Viper Scale Racing PST Slip-on Tyco 440X2 Polymer Rear (M1 Compound) All New PST slip on tires designed specifically for the TYCO 440X2 with upgrade Polymer magnets. Tires measure .454″ when mounted on stock rims.The new PST Pro Slip-on...

This is the Viper Scale Racing PST Slip-on Tires Tyco 440X2 Low Pro Fronts (S1 Compound) All New PST slip on tires designed specifically for the TYCO 440X2 wide pan as a performance stock replacement front tire.The new PST Pro Slip-on Tires are available...

This is the Viper Scale Racing PST Slip-on Tires Tyco 440X2 Low Pro Fronts (M1 Compound) All New PST slip on tires designed specifically for the TYCO 440X2 wide pan as a performance replacement front tire when using polymer magnets . The new PST Pro...

This is the Viper Scale Racing PST Slip-on Rear Tires Tyco 440X2 Low Pro (S1 Compound) All New PST slip on tires designed specifically for the TYCO 440X2 as a performance stock replacement tire.The new PST Pro Slip-on Tires are available in many...

This is the Viper Scale Racing Narrow PST for .385 Pro-Track Rims M1 Narrow PST for .385 Pro-track Rims. M1 is medium compound. *** Not compatible with Pro-Track #647 Rear Rims

This is the Viper Scale Racing Narrow PST for .385 Pro-track Rims S1 Narrow PST for .385 Pro-track Rims. S1 is Soft compound. *** Not compatible with Pro-Track #647 Rear Rims

This is the Viper Scale Racing Viper Billet .360 (Narrow) Single Flange Rims (4Gear) Viper precision machined billet racing wheels. These Narrow Single flange wheels are built to the highest standards, everything from the material to the concentricity...