This is the Hot Racing Hardened Steel Lightweight 53-Tooth Spur Gear for Traxxas 1/16 Vehicles like the 1/16 E-Revo, 1/16 Slash 4x4, 1/16 Summit, and 1/16 Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon...

This is the Hot Racing Hardened Steel 75-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless vehicles with proper adjustment.FEATURES:- CNC machined and...

This is the Hot Racing Hardened Steel 74-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless setups with proper gearing. Due to the gear being a smaller...

This is the Hot Racing Steel 49-Tooth 0.8 Mod 32-Pitch Center Differential Spur Gear for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks equipped with a center diff. The vehicle must have the center gear differential installed, as this gear...

These are Hot Racing Rear Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles.FEATURESSpring Steel...

These are the Hot Racing Rear Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Steel...

These are the Hot Racing Front Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, 1/10 Rally VXL, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these...

These are the Hot Racing Front Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Spring Steel...

These are the Hot Racing Front Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles.FEATURES:Steel...

This is the Hot Racing Black Aluminum 1.5-Degree Rear Hubs / Stub Axle Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC machined aluminum construction- Anodized...

This is the Hot Racing Aluminum Center One-Way Differential for Traxxas Slash 4X4, Stampede 4X4, Rally VXL, and Telluride 4X4 vehicles equipped with the center gear differential.The Hot Racing center one-way differential drives the front and rear wheels...

This is the Hot Racing Aluminum 10mm Offset 17mm Hex Hubs for the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +16mm per side. FEATURES:- Black anodized CNC machined aluminum hex adapter- Blue...

These are the Hot Racing Aluminum 12mm Hex Hubs with 25mm Extension for Traxxas Slash 4X4, Stampede 4X4, and 1/10 Rally VXL vehicles with 5mm diameter outer stub axles.FEATURES:- Extends the width of your buggy or truck for a wider stance and greater...

These are the Hot Racing Aluminum 12mm Hex Hubs with 28mm Extension for Traxxas Slash 4X4, Stampede 4X4, and 1/10 Rally VXL vehicles with 5mm diameter outer stub axles.FEATURES:- Extends the width of your truck for a wider stance and greater control-...

This is the Hot Racing Aluminum Clamping Servo Horn for 24-Spline Hitec ServosFEATURESDouble lock clamp to give precise fit to lock on to the servo spline.CNC 6061 aluminum construction,Anodized black in colorCompatible with Hitec brand 24 spline...

This is the Hot Racing 24-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, as...

This is the Hot Racing 23-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, as well as...

This is the Hot Racing 21-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, as well as...

This is the Hot Racing 30-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Hot Racing 29-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...

These are the Vanquish 12mm Aluminum Clamping Wheel Hexes (2) with a Black Anodized finish. The clamping design helps prevent breaking the hex pins. These are an excellent upgrade for Axial and Vaterra trucks.Features Clamping hex helps alleviate pin...

These are the Vanquish 12mm Aluminum Clamping Wheel Hexes (2) with a Clear Anodized finish. The clamping design helps prevent breaking the hex pins. These are an excellent upgrade for Axial and Vaterra trucks.Features Clamping hex helps alleviate pin...

This is the Vanquish Products Axial SCX10 Stage One Clear Anodized Aluminum Kit for use on all AX10, SCX10, and Honcho kits. The set consists of 8 degree knuckles, C-Hubs, and lockouts. Features Aluminum 8 Degree Knuckles, C-hubs and Lockouts Zero...

This is the Vanquish Products Axial SCX10 Stage One Black Anodized Aluminum Kit for use on all AX10, SCX10, and Honcho kits. The set consists of 8 degree knuckles, C-Hubs, and lockouts. Features Aluminum 8 Degree Knuckles, C-hubs and Lockouts Zero...

This is the Vanquish Clear Anodized Axial Wraith / Yeti HD Aluminum Truss, for use with Vanquish Wraith Axle part VPS04301, VPS04302, VPS04303. This also fits stock Axial Racing OCP Axles for Wraith and Ridgecrest. Features Anodized for...

This is a pair of Vanquish Axial SCX10-II Clear Anodized Aluminum Steering KnucklesFeatures Compatible with stock links Milled entirely from high quality billet aluminum Bolt-on realistic high steer arm adds scale appearance and double shear support...

This is the Vanquish Axial SCX10 Clear Anodized Aluminum Transmission Housing. This housing is designed to be a near exact replacement for the Axial SCX-10*Replaces Axial Racing part number AX80009***Replacement for original SCX10 and SCX10-ii RTR, NOT...

These are the Traxxas 15x26x5mm Black Rubber Sealed Ball Bearings (2) for use in the Traxxas X-Maxx 8S trucks. These come in packages of two bearings.FitsX-Maxx 8SXRT

This is a pair of Traxxas X-Maxx GTX 1.450 Rate Springs. These come in packages of two springs. This is a firmer spring rate than stock.Features Steel construction Firmer than stock 1.055 rate Natural (unpainted) finish Includes: Two 1.450 Rate...

This is a pair of Traxxas X-Maxx GTX 1.199 Rate Springs. These come in packages of two springs. This is a slightly firmer spring rate than stock.Features Steel construction Slightly firmer than stock 1.055 rate Natural (unpainted) finish Includes:...

This is a pair of Traxxas X-Maxx GTX 0.929 Rate Springs. These come in packages of two springs. This is a slightly softer spring rate than stock.Features Steel construction Slightly softer than stock 1.055 rate Natural (unpainted) finish Includes:...

This is a pair of Traxxas X-Maxx GTX 0.824 Rate Springs. These come in packages of two springs. This is a softer spring rate than stock.Features Steel construction Softer than stock 1.055 rate Natural (unpainted) finish Includes: Two 0.824 Rate...

This is set of four Traxxas X-Maxx and XRT GTX Shock PTFE-Coated Aluminum Spring Retainer Adjusters. These are threaded and mount on the shock body to allow adjustment of the spring pressure.Hard anodized, PTFE-coated aluminum upper spring retainers for...

This is set of four Traxxas X-Maxx and XRT GTX Shock Blue Aluminum Spring Adjusters. These are threaded and mount on the shock body to allow adjustment of the spring pressure.Blue-anodized aluminum upper spring retainers for GTX shocks come equipped with...

This is a pair of Traxxas X-Maxx GTX Shock 1.055 Rate Springs. These come in packages of two springs.SpecificationsLength: 6.2" (158mm)Inner Diameter: 1.13" (28.8mm)

This is a Traxxas X-Maxx Hard-Anodized PFTE-Coated GTX Shock Body. Upgrade to these for long-lasting, ultra-smooth damping performance. The rest of your stock X-Maxx shock components can be transferred right over to this version.

This is a Traxxas X-Maxx and XRT Hard-Anodized PFTE-Coated Aluminum GTX Shock Cap and Spacer Set. This includes all four shock caps. Set of four PTFE-coated aluminum shock caps add strength and style to GTX shocks. Shock caps come with pivot balls...

This is a Traxxas X-Maxx and XRT Blue Aluminum GTX Shock Cap and Spacer Set. This includes all four shock caps. Set of four blue-anodized aluminum shock caps add strength and style to GTX shocks. Shock caps come with pivot balls installed and include...

This is a pair of Traxxas X-Maxx Red GTX Aluminum Shocks Fully-Assembled without Springs. Features Aluminum bodies, anodized red in color Fully-assembled, springs not included Includes: Two GTX ShocksBottle of 30wt Silicone Shock Oil

This is a set of Traxxas X-Maxx Blue Aluminum Hex Wheel Hubs (4). These are a great upgrade from the stock plastic hex hubs.Includes: Four aluminum Hex Hubs Accessory Part ForX-MaxxXRT