These are the Traxxas TUBES Green-Anodized 7075-T6 Aluminum 73mm Camber Links.  The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks.  An alumium adjustment wrench...

These are the Traxxas TUBES Green-Anodized 7075-T6 Aluminum 83mm Camber Links.  The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks.  An alumium adjustment wrench...

This is the Traxxas Velineon 3500 VXL Brushless Motor Endbell Cover.  This is the standard replacement for the 1/10 VXL brushless motor.  If your original is lost or damaged, replace it to help protect the motor and wiring from damage. Stock...

This is the Traxxas Metal Gear Set for 2085 & 2085X Servos found in the Traxxas X-Maxx trucks. These are stock replacement gears in the 2085X, but can also be used to upgrade a standard 2085 servo to metal gears. Accessory part for these...

This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4).  These are used as wheel nuts and lock nuts on many Traxxas models. Accessory part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.01/16 E-Revo VXL1/16 E-Revo1/16...

This is the RPM Body Saver Set for Traxxas Rustler 4x4 trucks.  These are compatible with the stock bodies on both the Rustler 4x4 Brushed and Rustler 4x4 VXL Brushless trucks, as well as all Traxxas 6717 and 6718-series bodies RPM engineers...

This is the JConcepts Startec Street Eliminator Front and Rear Drag Racing Wheel Set for Traxxas 2WD Slash and Bandit vehicles.  The front wheels are a 2.2" buggy wheel, and the rear are 2.2x3.0" short course style wheels.  These feature 12mm...

These are the GPM Racing Black Aluminum Lower Suspension Arms (front or rear) for Traxxas X-Maxx trucks. Each pack includes one pair of arms, which can be used on the front or rear of the truck. Made of 6061-T6 aluminum with an anodized finish, these are...

This is the GPM Racing Mock Chevy LS3 V8 Engine with Cooling Fan with Silver Heads for use in the Traxxas TRX-4.  With a built-in temperature sensor, the high-speed fan turns on as the motor heats up, and shuts off if it is running cooler.  Use...

This is the GPM Racing Mock Chevy LS3 V8 Engine with Cooling Fan with Red Heads for use in the Traxxas TRX-4.  With a built-in temperature sensor, the high-speed fan turns on as the motor heats up, and shuts off if it is running cooler.  Use...

This is the GPM Racing Black Air Intake for use with the GPM V8 6.2L LS3 Mock Engine with the Traxxas TRX-4. It includes stainless steel clamps for ultra-realistic looks! The item is supplied black, but can be painted to suit your build. The second...

This is the GPM Racing Black Dual Air Intake for use with the GPM V8 6.2L LS3 Mock Engine for the Traxxas TRX-4. It includes stainless steel clamps for ultra-realistic looks! The item is supplied black, but can be painted to suit your build.  The...

This is the Gen3 RC Complete 19-Piece Rubber Sealed Ball Bearing Kit for Traxxas 4-Tec 2.0 XL-5 & VXL vehicles.  These can be used on the 4-Tec 2.0 Mustang, Ford GT, and the XL-5 and VXL chassis sets.Features Super durable black rubber seals...

This is the Gen3 RC Complete 40-Piece Rubber Sealed Ball Bearing Kit for Traxxas TRX-4 Crawlers. This fits all TRX-4 models.After a bunch of mud, water, and grime finds its way into your off-roader's bearings, these are a must to restore the performance...

These are the GPM Racing Green Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...

These are the GPM Racing Black Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...

These are the GPM Racing Red Aluminum Front Suspension Arms for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Nitro Slash trucks. Made of 6061-T6 aluminum and finished with anodizing, these look awesome and help beef up your truck. Hinge...

These are the GPM Racing Black Aluminum Front Suspension Arms for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Nitro Slash trucks. Made of 6061-T6 aluminum and finished with anodizing, these look awesome and help beef up your truck. Hinge...

These are the GPM Racing Blue Aluminum Front Suspension Arms for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Nitro Slash trucks. Made of 6061-T6 aluminum and finished with anodizing, these look awesome and help beef up your truck. Hinge...

These are the GPM Racing Green Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. These are made of 6061-T6 aluminum and anodized to finish them off. They are durable and look great!These are...

These are the GPM Racing Gunmetal Aluminum Front Suspension Arms for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Nitro Slash trucks.These are a direct fit upgrade for stock Traxxas part 3631 suspension arms.Accessory Part ForTraxxas 1/10...

These are the GPM Racing Blue Aluminum Front Suspension Arms for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Nitro Slash trucks.These are a direct fit upgrade for stock Traxxas part 3631 suspension arms.Accessory Part ForTraxxas 1/10...

This is the Futaba R2008SB 8-Channel 2.4GHz S.Bus S-FHSS Receiver for use with the Futaba 8J 2.4GHz Computer Radio System.Features: For aircraft models Dual Antenna Diversity High voltage operation (4.8 - 7.4V) Frequency hopping Spread Spectrum...

This is the Futaba R3008SB 2.4GHz T-FHSS S.Bus2 8/32 Channel Telemetry ReceiverFeatures Bi-directional communication with a T-FHSS Air-2.4GHz Futaba transmitter using the S.BUS2 port Standard PWM output ports and S.BUS output ports One year limited...

This is the Futaba R2006GS 2.4GHz SFHSS 6-Channel Receiver.Features High-voltage (4.8 - 7.4V) capability eliminates the need for a regulator when using a 2S 7.4V LiPo pack as a power source Normal and High-Speed Modes: Normal mode frame rate is...

This is the Futaba R304SB TFHSS 4-Channel Telemetry Receiver for 4PLS, 4PX, and 4GRS radio systemsFeatures For use with the Futaba 4PLS, 4PX, and 4GRS 2.4GHz T-FHSS radios One year limited warranty through Futaba USA beginning at date of...

These are the GPM Racing Green Aluminum Front Suspension Arms for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Nitro Slash trucks. These are a direct fit upgrade for stock Traxxas part 3631 suspension arms.Accessory Part ForTraxxas 1/10...

These are the GPM Racing Orange Aluminum Front Suspension Arms for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum and anodized for a great looking finish, these are tough and help make your truck stand out. Hinge pins...

These are the GPM Racing Black Aluminum Front Suspension Arms for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum and anodized for a great looking finish, these are tough and help make your truck stand out. Hinge pins...

These are the GPM Racing Blue Aluminum Front Suspension Arms for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum and anodized for a great looking finish, these are tough and help make your truck stand out. Hinge pins and...

These are the GPM Racing Black Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and look awesome!These fit in place of...

These are the GPM Racing Blue Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and look awesome!These fit in place of...

These are the GPM Racing Gunmetal Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. These are made of 6061-T6 aluminum and anodized to finish them off. They are durable and look great!These...

These are the GPM Racing Gunmetal Aluminum Steering Blocks for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, Bandit, and Nitro Slash vehicles. Made from 6061-T6 aluminum and anodized with a color finish, these are durable and look great.These...

These are the GPM Racing Black Aluminum Steering Blocks for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, Bandit, and Nitro Slash vehicles. Made from 6061-T6 aluminum and anodized with a color finish, these are durable and look great.These are...

These are the GPM Racing Red Aluminum Caster Blocks for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and others vehicles listed below. Machined from 6061-T6 aluminum, these are a great way to add strength, tighten up handling, and dress up...

These are the GPM Racing Gunmetal Aluminum Caster Blocks for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and others vehicles listed below. Machined from 6061-T6 aluminum, these are a great way to add strength, tighten up handling, and dress...

These are the GPM Racing Black Aluminum Caster Blocks for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and others vehicles listed below. Machined from 6061-T6 aluminum, these are a great way to add strength, tighten up handling, and dress up...

This is the Spektrum DSMX Remote Receiver with 24" Extension.Key Features Repositionable and Replaceable Antenna - The antenna is easy to reposition to exit the case from the top or side Case design offers better strain relief on antenna lead ...

This is the Traxxas LaTrax Camber & Toe Links for Teton Pre-Runner SSTSet of fixed camber links (4) and toe links (2)Replacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton