This is the Team Integy Silver Aluminum Heavy-Duty Wheelie Bar for the Traxxas Revo 2.5 and 3.3 trucks.  This looks awesome, and it helps prevent your high-performance Revo truck from flipping over backwards onto its lid.  This prevents...

This is the Team Integy Silver Aluminum Engine Mount for the Traxxas Revo 2.5, 3.3, Slayer, and Slayer Pro trucks. This mount attaches engine to the chassis. FEATURESAluminum construction, silver in colorDirect fit hop-up requires no...

This is an E-Flite Main Frame Set for the Blade CX helicopter.

This is a pair of 5.4 rate (pink) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small pink square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the...

This is the 2.6 rate Spring Set for the Traxxas GTR Shocks used on the Revo. FEATURES:Spring Steel ConstructionRed Outer Nylon CoatingYellow 2.6 tension rating INCLUDES:Two Red 2.6 Springs for the Traxxas GTR Shocks used on the...

This is a set of two Traxxas Talon Tires with Gemini 3.8" Chrome Wheels.  These wheels and tires are a direct replacement for the Revo and T-Maxx 3.3.  They feature soft compound treaded rubber and a low profile design...

This is a Traxxas Progressive 3 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5319 and TRA5319X pushrods.  If you need the pushrods too, search our store for the listed part numbers.

This is a Traxxas Long Travel Rocker Arm Set for the Revo 2.5, 3.3, E-Revo, Summit, and Slayer trucks. These fit TRA5318 and TRA5318X pushrods. If you need the pushrods too, search our store for the listed part numbers.

This is a package of Traxxas Small Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  These are used on the steering linkages of the Revo. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:Six Rod EndsSix Pivot...

This is a Traxxas Revo 2.5 and 3.3 Steering Servo Mount Set.  This includes two sets of servo mounts.

The Tamiya RS-540 sport tuned motor is an economical high performance motor for on- and off-road vehicles.  It will work in many Tamiya and other vehicles (check instruction manual for applicability).  This comes with 2" wire leads with bullet...

This is the Scalextric BMW E30 M3 - Bathurst 1000 1992 - Longhurst & Cecotto 1/32 Slot Car - OPEN ITEM The slot car came loose in the case and the screw hold down has damaged the bottom of the chassis. The car has never been run and or used. The car...

This is the Traxxas TRX-4 Land Rover Defender Black Body The TRX-4 Land Rover Defender body comes fully painted and trimmed out of the bag with pre-drilled body holes. Includes: Decals. Fits: 324 mm wheelbase. **Body accessories and ExoCage sold...

This is the Traxxas TRX-4 Sport Tan Clipless Body Is it time to replace your clipless TRX-4 Sport body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Bodies come trimmed and...

This is the Traxxas TRX-4 Sport Red Clipless Body Is it time to replace your clipless TRX-4 Sport body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. Bodies come trimmed and...

This is the Innovative Hobby Ultracal Chrome Billet Diamond Plate, Micro Accessories and Grid Decals Ultracal DecalsSlot car / scale model Chrome Billet Diamond Plate, Micro Accessories, and Grid for 1:24, 1:32, and 1:43 scale from Innovative Hobby...

This is the Innovative Hobby Ultracal Body Chrome & Trim Detailing Ultracal DecalsSlot car / scale model body chrome and trim detailing from Innovative Hobby Supply is a new type of chrome application that has an amazing chrome shine, and really...

This is the Traxxas Mini XRT Roof Skid with LED Lights For #10715 Bodies Replacement Mini XRT roof skid with cooling vent and LED lights for TRA10785X LED light kit **Fits TRA10715-series Bodies Only. **TRA10712-series Bodies Require TRA10794 Conversion...

This is the Traxxas Mini XRT Body Reinforcement Set For #10715 Bodies Replacement body reinforcements for 10715-series Mini XRT bodies. Does not fit 10712-series bodies.

This is the Traxxas Mini XRT Front and Rear Clipless Body Mount Latches Latch, body mount, front & rear (for clipless body mounting) Attaches to TRA10712-series Bodies  

This is the Traxxas Mini XRT Body Reinforcement Set Replacement body reinforcements for TRA10712-series Mini XRT bodies. Does not fit TRA10715-series Bodies.

This is the Traxxas GT-Maxx Springs (4.003-Rate) (2) GT-Maxx rear shock springs allow you to compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (4.003 rate) (1 pair)

This is the Traxxas GT-Maxx Springs (2.462-Rate) (2) GT-Maxx front shock springs allow you to compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (2.462 rate) (1 pair)

This is the Traxxas GT-Maxx Springs (3.097-Rate) (2) GT-Maxx rear shock springs allow you to compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (3.097 rate) (1 pair)

This is the Scalextric 1/32 Radius 3 Curve Inner Borders 22.5° - OPEN ITEM This is an open box item. The factory packaging has been broken/opened. The track pieces have not been used and are otherwise in new condition.  The track pieces will be...

This is the GPM TRX-4m Ford Bronco Silver Middle Trim Panel Plate of Engine Cover Add detail to the middle section of the engine hood. IncludesMiddle Trim Panel of Engine Cover (1 set/2 pieces) - 2pcsSelf-tapping Screw 1.2 x 3mm - 26pcs3M Adhesive Tape -...

This is the GPM TRX-4m Ford Bronco Black Middle Trim Panel Plate of Engine Cover Add detail to the middle section of the engine hood. IncludesMiddle Trim Panel of Engine Cover (1 set/2 pieces) - 2pcsSelf-tapping Screw 1.2 x 3mm - 26pcs3M Adhesive Tape -...

This is the Pro-Line Protoform Crosshair Magnetic Body Mounting Kit Have you ever painted up a killer race body, only to botch the mounting job by aligning it off-center, crooked, or too far forward or back on your chassis? We've got a tool for you! The...

This is the Pro-Line Lid Skid Body Protectors Are you tired of spending hours prepping and painting your brand-new body and then scratching it and damaging it on your very first run? Pro-Line has the solution for you! Introducing the Lid Skid Body...

This is the Traxxas Blue Aluminum 1/16 Motor Plate When upgrading your 1/16 scale vehicle to Velineon brushless power, you will need to change the standard motor plate and mount. Use the 7090 motor plate and 7060 motor mount with the Velineon 380...

This is the Traxxas 13-Tooth Rear Differential Pinion Gear Use this 13-tooth rear differential pinion gear when installing the shorter 10857 or 10855X center driveshafts along with the optional 10758 slipper clutch or 10760-series center differential in...

This is the Traxxas Aluminum Center Driveshaft This aluminum driveshaft is shorter than the standard driveshaft to accommodate the optional 10758 slipper clutch or 10760-series center differential. When using the aluminum driveshaft, you must also use...

This is the Traxxas Extreme Heavy-Duty Steel CV Driveshaft Rebuild Kit Rebuild your Traxxas extreme-duty steel CV driveshafts with this kit. Each kit contains the pins and hardware to rebuild one driveshaft. Fits: TRA9051X and TRA9052X

This is the Robinson Racing Extra Hard Steel 25-Tooth Pinion with 1 Mod Pitch and 5mm Bore.FeaturesExtra hardened steel construction for durabilityPrecision madeFor use in extreme conditionsIncludesOne 25 tooth pinion gearOne 4x4mm set...

This is the Traxxas Assembled Differential w/ 12-Tooth Ring Gear The replacement differential comes completely assembled and ready to install. Fits: Front or Rear Replacement Part ForMini Maxx

This is the RPM Traxxas X-Maxx Front Upper Bumper Mount The RPM Front Upper Bumper Mount for the Traxxas X-Maxx is designed for serious impact protection. It's a stout, ultra strong alternative to the small beam supports offered with the stock mount...

This is the RPM Traxxas X-Maxx Rear Upper Bumper Mount The RPM Rear Upper Bumper Mount for the Traxxas X-Maxx is designed for serious impact protection. It's a stout, ultra strong alternative to the small beam supports offered with the stock mount. Their...

This is the Spektrum S44 Micro 4 port AC/DC 1S LiPo Charger Micro 4-port AC/DC 1S LiPo ChargerThe Spektrum Micro 4 Smart charger is a 4-port tool for the RC pilot who wants the ultimate in 1S LiPo battery charging. Featuring Spektrum Smart Charging...

This is the Innovative Hobby 1/64 scale Realistic Display Parking Lot (Straight Yellow Lines) Parking LotThe "Giant Diecast Display Mat" is made with High Def "Photo Real" graphics on a smooth soft touch PVC Plastic PROFLEX Each parking lot is...

This is the Innovative Hobby 1/64 scale Giant Municipal Parking Lot and Staging Area (Angled Yellow Lines) Parking LotThe "Giant Municipal Parking Lot" is made with High Def "Photo Real" graphics on a smooth soft touch PVC Plastic PROFLEX Each parking...