These are the Hot Racing Aluminum Precision Trim Tab Adjusters for Traxxas Spartan, Spartan SR and DCB M41 boats.FEATURES:- CNC machined aluminum construction- Anodized blue for durability, corrosion resistance, and great looks- Adjusts stock trim tab...

This is the Hot Racing Aluminum Double-Clamping Servo Horn for use with 25-Spline standard-shaft servos from Futaba, Traxxas, and Savox.FEATURES:Double lock clamp to give precise fit to lock on to the servo spline.CNC 6061 aluminum construction, anodized...

This is the Hot Racing 26-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

This is a Traxxas X-Maxx and XRT Red Aluminum GTX Shock Cap and Spacer Set. This includes all four shock caps. Set of four red-anodized aluminum shock caps add strength and style to GTX shocks. Shock caps come with pivot balls installed and include...

This is a set of Traxxas X-Maxx and XRT Red Aluminum Hex Wheel Hubs (4). These are a great upgrade from the stock plastic hex hubs. Upgrade your stock 24 mm plastic wheel hubs with the ruggedness and good looks of anodized aluminum. Sold as a set of four...

This is the Traxxas X-Maxx 6S Differential Ring Gear. This can be used in the front or rear differential.Features Hardened steel construction Fits front or rear differential Includes: Ring Gear

This is a set of four Traxxas 17mm Splined Serrated Blue Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas X-Maxx and XRT Front and Rear Tie Bar Mount SetFeatures One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and rear bulkhead assemblies in place Includes: Front and Rear...

This is the Traxxas Suspension pin set, complete (front & rear) / hardware. Complete front and rear suspension pin set with hardware Replacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Rally1/18 LaTrax Rally VR461/18 LaTrax Teton

This is the Traxxas Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks). The 1/10 scale GTR shock rebuild kit includes the parts needed to refresh two GTR shocks. Inludes:...

This is the Traxxas Wing, 1/16 E-Revo (Exo-carbon finish)/ decal sheet.Wing, 1/16 E-Revo (Exo-carbon finish)/ decal sheet Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless

This is the Traxxas Cover, gear/ motor wire hold-down clip. Replacement gear cover with motor wire hold-down clip Replacement Part For BIGFOOT 4X4 Brushless Officially Licensed ReplicaFord F-150 Raptor R 4X4Hoss 4X4 VXLJato 4X4 BrushlessJato 4X4 VXLSlash...

This is the Traxxas Cover, center driveshaft (clear). This is Traxxas part number 6741Part Number: 6741 / TRA6741FitsStampede 4x4 VXLStampede 4x4 XL-5TellurideMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or...

This is the Traxxas LED lens, blue (4). This is Traxxas part number 6652Part Number: 6652 / TRA6652FitsAliasMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas Lower chassis, low CG (grey). This is Traxxas part number 5831GPart Number: 5831G / TRA5831GFitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please check your vehicle manual...

This is the Traxxas 1/10 Summit Front Chrome Bumper, Lightbar, and Roof Lightbar.Fits1/10 Summit

This is a set of Traxxas 1/10 Summit Left and Right Rear Bulkhead Halves.Fits1/10 Summit

This is a set of Traxxas 1/10 Summit Fender Flairs, Retainers, and Screws.IncludesTwo Front Fender FlairsTwo Rear Fender FlairsTwo Front Fender Flair RetainersTwo Rear Fender Flair RetainersTwenty Two 2.6x6mm Cap Screws Fits1/10 Summit

This is the Traxxas Jato 3.3 Battery Box and Rear Bumper. This battery box includes mounting bosses to install the wheelie bar.IncludesBattery box with coverFour 2.5X10mm Socket Head Cap ScrewsFitsJato 2.5Jato 3.3

This is a pair of Traxxas Shock Dust Boots for Jato and XO-1 shocks. These help protect your shock shafts to keep them in great condition and operating smoothly.Includes:Two Blue rubber Shock BootsTwo black Plastic Shock Caps. FitsJato 2.5Jato 3.3XO-1

This is the Traxxas OptiDrive Electronic Shift Module for Revo 3.3, T-Maxx 2.5R, and T-Maxx 3.3 (with reverse) trucks.FitsRevo 3.3T-Maxx 2.5RT-Maxx 3.3

These are the Traxxas 17mm Splined Green Aluminum Wheel Hubs, Nuts, & Screw Pins for the 1/10 E-Revo, E-Maxx, Summit, T-Maxx, and Revo 3.3 trucks. These allow you to run wheels with a 17mm hex size.Features:Aluminum construction, green anodized in...

This is a set of six Traxxas 4mm Grub / Set Screws with Threadlock. Set of six 4 mm set screws (grub screws) with threadlock Replacement Part ForE-Revo VXL BrushlessJatoNitro SlashRevoSlayer Pro 4X4SummitT-MaxxTRX 2.5RTRX 3.3

This is a set of four Traxxas 3x10mm Flat-Head Hex Drive Machine Screws. Set of four 3x10 mm flat-head machine screws with hex drive headsReplacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayDrag SlashFactory Five...

These are Traxxas 2.5x5mm Button-Head Hex Machine Screws. Each package contains six screws. Replacement part forBandit VXLFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Rustler VXLSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

These are the Traxxas XX-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shocks shafts. These XX-long hardened steel shafts have a super tough titanium nitride coating with a micro-polished finish for smoother...

These are the Traxxas 3x18mm Roundhead Machine Screws. Each package contains six screws.FitsE-MaxxE-Maxx BrushlessNitro Slash

This is a pack of Traxxas 3x30mm Cap Hex Head Machine Screws. Each package includes six screws.

This is a set of Traxxas Threaded Rods (20mm, 25mm, & 44mm), and a 12mm Set Screw.Includes20mm Threaded Rod25mm Threaded Rod44mm Threaded Rod12mm Set Screw Replacement Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 Raptor...

This is a pair of Traxxas Tracer 2.2" Black Chrome Front Wheels for the Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pins.FEATURES:Black Chrome 5-spoke designFits standard 2.2" truck tiresINCLUDES: Two front 2...

This is a pair of Traxxas Front White Springs. These fit the front long Ultra Shocks (3760A) on many Traxxas vehicles.Fits:Bandit VXLBandit XL-5Nitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler XL-5Slash 2WD VXLSlash 2WD XL-5

These are the Traxxas Hardened Steel Titanium-Nitride Coated Shock Shafts. These are an excellent upgrade for many Traxxas vehicles.Includes: Two shaftsSpecificationsDiameter: 3mm (0.118")Length: 47 mm (1.85")Thread: 3mm (0.118") Accessory Part ForHoss...

This is a pair of Traxxas GTR Long Shocks with Hard-Anodized Aluminum Shock Bodies and Titanium-Nitride Coated Shafts. These are a great upgrade for Slash 4x4 and Stampede 4x4 trucks. 1/10 scale long GTR shocks represent the peak of suspension technology...

This is the RPM Black Front Shock Tower for the Traxxas Nitro Slash, Nitro Rustler, and Nitro Sport trucks.RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great...

These are the RPM Green Shock Shaft Guards for the Traxxas 1/10 Slash 2WD, Slash 4x4, Stampede, Rustler, Bandit, and 1/10 Rally vehicles, as well as Durango DEX210, DEX410, and DEST210 vehicles. These do not fit vehicles using GTR shocks, so they will...

This is the RPM Chrome Rear Bumper for the Traxxas 1/10 Slash 4x4 short course trucks.The 4x4 version of the Slash is another awesome creation from the minds at Traxxas but with a little help from RPM, we’ve made it even better! Our new rear bumper is...

This is a pair of Traxxas GTR Shock Springs (Long .892 Blue) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

This is a pair of Traxxas GTR Shock Springs (XX-Long .884 Pink) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR...

This the LaTrax Alias Quadcopter Orange Rotor Blade Set. It includes two rotor blades and two screws. Features: Plastic construction Flexible to withstand crashes Includes: Two Rotor Blades Two 1.6x5mm Button Head Cap Screws

This is the Traxxas Telemetry Expander Mount 6556 for the XO-1, E-Revo*, Summit*, T-Maxx, E-Maxx, Revo 3.3, and Slayer Pro trucks. This part makes it possible to mount the #6550 Telemetry Expander Module on these vehicles.*NOTE: The E-Revo and Summit...