This is the Traxxas Spur gear, 60-tooth.60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your...

This is the Traxxas Gear, 14-T pinion / set screw. 14-tooth pinion gear. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions...

This is full set of four Traxxas 1/16 GTR Hard-Anodized Aluminum Adjustable Shocks with TiN Shafts and PTFE-coated Bodies.  Shock oil is included.  These are the ultimate shock upgrade for 1/16 E-Revo, 1/16 Summit, and 1/16 Slash 4x4 trucks...

This is the Traxxas Input shaft (cush drive)/ pin. This is Traxxas part number 6466Part Number: 6466 / TRA6466FitsXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas XO-1 Tall Battery Hold-Down Retainers. This is Traxxas part number 6427XPart Number: 6427X / TRA6427XFitsFunny CarXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas XO-1 Tall Battery Hold-Down. This is Traxxas part number 6426XPart Number: 6426X / TRA6426XFitsXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas Body mount posts (2)/ body post pivot (2)/ screw pins, 2.5x18mm (2). This is Traxxas part number 6416Part Number: 6416 / TRA6416Fits1/10 RallyXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment,...

This is the Traxxas BFGoodrich Mud-TerrainT/A KM2 tires with Chrome Green Beadlock Wheels. Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome SCT wheels with green beadlock-style trim. Fits: 12 mm Hex, 2WD...

This is the Traxxas Springs, front (white) (progressive rate) (2). This is Traxxas part number 5857Part Number: 5857 / TRA5857FitsNitro SlashSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please...

This is the Traxxas Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip.Battery hold down and hold down retainer with battery post, foam spacer, and angled body clip Replacement Part ForDrag Slash 1967 Chevrolet C10...

This is the Traxxas Nerf bars, chassis (black). This is Traxxas part number 5823Part Number: 5823 / TRA5823FitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD XL-5More detail coming soon! Please check your vehicle manual to confirm vehicle fitment,...

This is a set of four Traxxas Red Body Clip Retainers. These body pin retainers are perfect for keeping your clips from going missing when prepping your boat at the lake.FitsDCB M41Spartan

This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod endsSpecificationsLength: 31.5mm (1.24")Width at ball joint: 11mm (0...

This is the Traxxas Blue Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum body with oversized spring collar for ...

This is the Traxxas 20-Tooth Idler Gear and Shaft for the E-Maxx, E-Maxx Brushless, 1/10 E-Revo, 1/10 E-Revo Brushless, and 1/10 Summit trucks.IncludesOne 20 Tooth Idler GearOne 5x18mm Idler Gear ShaftSpecificationsOutside Diameter: .86" (22mm)Inside...

This is the Traxxas Black Rear Springs for use on the XX-Long Ultra Shocks used on vehicles like the Slash 2WD, Rustler, Stampede 2WD, Stampede 4x4, and others.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro...

This is the Traxxas Green Wheelie Bar Mount with Hardware for Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.IncludesOne wheelie bar mountHardwareInstructions Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacRustler VXLRustler...

This is a set of Traxxas 3x15mm Flat-Head Hex Drive Machine Screws. Each package includes six screws.Includes: Six 3 x 15mm Flathead Hex Machine Screws Replacement Part ForBandit VXLDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLMaxxRustler...

These are the Traxxas 3x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Monster Jam Trucks1/10 SummitBandit VXLBandit XL-5CraniacFunny CarRevo 3.3Rustler XL-5SkullySlayerSlayer...

This is a pair of Traxxas Bandit Alias 2.2" Rear Tires with Foam Inserts. These are a soft-compound tire, for use with 2.2" wheels on the Traxxas Bandit XL-5 and VXL buggies.

This is a tube of Traxxas Marine Grease (30cc) for use on RC boats like the Traxxas Spartan. This is a must-have accessory to keep the flexshaft of your boat in good condition and performance at its peak! Use marine grease liberally on your propeller...

This is the RC4WD Wired Winch Control Unit offered to allow operation function from your radio and receiver. This will allow you to control a winch with your remotes third channel. This is recommended for use with the RC4WD Warn 1/10 9.5cti Winch...

These are the RPM Black Revolver 2.2/3.0 Front Wheels for the Traxxas Slash 2WD Electric Short Course trucks with Spline Drives. These feature splined drives instead of hexes for incredible strength. Spline adapters are included.The most popular RPM...

This is the RPM Green Axle Carriers for the Traxxas 1/16 E-Revo, 1/16 Slash, and 1/16 Summit. This fits brushed and VXL brushless versions.There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of...

This is a pair of Traxxas GTR Shock Springs (XX-Long 1.004 Blue) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR...

This is a pair of Traxxas GTR Shock Springs (Long .623 Orange) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

This is the Traxxas Center Harness and Wire Clip for the LED Lights used on the Summit 1/10 truckFeatures:JST ConnectorsIncludes:One Center HarnessOne Wire ClipThree Zip Ties

This is the optional Clear Body for the Traxxas Summit VXLFeaturesTrimmed and ready to paintIncludesOne Clear Body for the Traxxas 1/16 Summit VXLRequiresPolycarbonate safe spray or brush-on paintGrille and decalsSpecificationsLength: 11.4" (291mm)Width:...

This is the Chassis for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionGrey in colorSpecificationsLength: 245mm (9.6")Width: 107mm (4.2")Height: 40mm (1.6")

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

These are the Traxxas All-Star Chrome Wheels with Talon Tires Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with foam inserts and pre-glued to tough 2.8″ All-Star 5-spoke chrome wheels. The...

These are the 4x15mm Round Head Machine Screws from Traxxas.FeaturesSteel construction Silver in colorIncludesSix 4x15mm Round Head Screws SpecificationsLength: 15mm (0.59")Width: 4mm (0.16")

These are the optional Traxxas Differential Output Yokes for the E-Maxx, T-Maxx .15, 2.5, and 3.3 trucks. FEATURES: Features thicker plastic for long life and durability These diff yokes are more rigid than the stock yokes Black in color INCLUDES:Two...

This is the Traxxas Spartan Stuffing Tube with Nylon Liner. Replacement stuffing tube assembled with liner Features: Brass and nylon construction Includes: One Assembled Stuffing Tube Specifications:Length: 10.6" (270mm)Outside Diameter of Stuffing Tube:...

This is a pair of Traxxas Aluminum Bellcrank Posts for the T-Maxx and E-Maxx trucks. These bellcrank posts hold the steering bellcranks to the chassis. The link connects the steering bellcrank to the servo saver. Features: Stock aluminum...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1 Piston1 Sleeve (liner)

These are Traxxas Steering Bellcranks and Draglinks for the Traxxas Rustler, Stampede, and Bandit. Left and right steering bellcranks with drag link Features: White Plastic Construction Replacement Part ForBandit VXLBanditFord F-150 RaptorNitro...

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...

This is the RPM True-Track Rear A-Arm Conversion in Black for all versions of the Traxxas Revo 2.5, 3.3, E-Revo, and E-Revo Brushless. This setup is lighter, stronger, and eliminates the bump steer of the rear end! The RPM True-Track Rear A-arm...