This is the GPM Racing Gunmetal Aluminum Front and Rear Sway Bar Set with Stainless Steel Links for Traxxas Unlimited Desert Racer trucks. With the arms made of 6061-T6 aluminum and the sway bar turnbuckle links made of 304 stainless steel, this setup...

These are the GPM Racing Gunmetal Aluminum Front Lower Suspension Arms for Traxxas Unlimited Desert Racer trucks. Made of 6061-T6 aluminum, these arms are incredibly durable and add to the UDR's ultra-realistic appearance. These come with a...

This is the GPM Racing Orange Aluminum Steering Bellcrank and Servo Saver Set for Traxxas Unlimited Desert Racer trucks. Made of 6061-T6 aluminum, this assembly is durable and rock solid. The anodized finish makes the part look awesome installed on the...

This is the GPM Racing Red Aluminum Thickened Front Bulkhead Tie Bar for Traxxas Unlimited Desert Racer trucks. This is made of 6061-T6 aluminum with an anodized color finish. These look fantastic and help dress up the UDR even more. Stainless steel...

These are the GPM Racing Gunmetal Aluminum Front Steering Toe Links for Traxxas X-Maxx trucks. Made of 6061-T6 aluminum, these are much more durable than stock. They are anodized for a fantastic look. Perfect for bashers and show trucks!These are...

This is the GPM Racing Black Aluminum Rear Bumper Mount for Traxxas TRX-4 scale trail trucks and rock crawlers. Made of 6061-T6 aluminum with an anodized finish, these are durable and look great.This upgrade fits in place of the rear mount in Traxxas...

This is the GPM Racing Green Stainless Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with the main...

These are the GPM Racing Orange Aluminum Front Shocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum and with a monster 4mm shock shaft, these shocks are built to last. They include three full spring sets (1...

These are the GPM Racing Black Aluminum Rear Stub Axle Carriers for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, Telluride, and others (see below). Made of 6061-T6 aluminum and anodized for a spectacular finish, these are a great way...

This is the GPM Racing Orange Aluminum Motor Mount for use in Traxxas Rustler 4x4 and Slash 4x4 low-CG chassis trucks. This will also fit the Traxxas 1/10 Rally cars. Made of 6061-T6 aluminum, this reduces flex and looks great. Stainless steel...

This is the GPM Racing Black Aluminum Complete Turnbuckle Tie Rod and Camber Link Set for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance.This set replaces all of the...

This is the GPM Racing Silver Aluminum Rear Skid Plate for the Traxxas 1/10 E-Revo 2.0 VXL Brushless trucks. Made of 6061-T6 aluminum and finished in anodized coloring, these are super durable and help make your truck stand out! Stainless steel...

This is the GPM Racing Complete Stainless Steel Adjustable Suspension Push Rod and Steering Tie Rod Link Set for the Traxxas E-Revo 2.0 VXL Brushless trucks. The set includes all four suspension push rods and all four tie rods.This set replaces Traxxas...

This is the GPM Racing Black 6061-T6 Aluminum 90T Progressive-2 Front Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x16-2pcsStainless Steel Round Head...

This is a set of four Traxxas TRX-4 Black Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels. Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4...

This is a set of four Traxxas TRX-4 Satin Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4...

These are the Traxxas TRX-4 Rear Heavy Duty Chromoly Axles. These are for use with the TRA8065 machined rear portal input drive gears.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 SportTRX-4 Tactical

These are the Traxxas TRX-4 Front Heavy Duty Chromoly Left and Right Axle Shafts. These can only be used with the TRA8064 machined portal drive input gear.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 SportTRX-4...

This is the Hot Racing Heavy-Duty Blue Aluminum Motor Mount with Over-Sized Bearings for the Traxxas Slash 4x4 Low-CG chassis trucks. This fits 1/10 Slash 4x4 Platinum, Ultimate, OBA trucks, Rally VXL, as well as 4x4 trucks with the low-CG conversion...

This is the Traxxas E-Revo 2 Heavy-Duty Differential Carrier, Gaskets and Spacers. This includes the diff carrier, 2 X-ring gaskets, ring gear gasket, 4 spacers, and 12.2x18x0.5 washer.Stock Replacement OnE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Planetary Gears (4).Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Rigid Edition Body Decal Set.Stock Replacement OnUnlimited Desert Racer (UDR)

This is a set of four Traxxas Green Aluminum 5mm Flanged Serrated Nylon Locking Nuts Lightweight and great looking, these 5 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking...

These are the Traxxas TRX-4 Inner Fenders, Rock Light Covers, Battery Plate and 3x8 Screws (4). This is the stock set found on the TRX-4 Ford Bronco. Front and rear inner fenders for the TRX-4 with rock light covers (8), battery plate, and 3x8 mm screws...

This is a pair of Traxxas TRX-4 White Stripe 0.30 Rate GTS Shock Springs (natural finish).Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Tactical

This is the Traxxas 4-Tec 2.0 Ford GT Blue Pre-Painted Body with Decals. This body is even pre-cut, making for quick final installation!Note: Tail lights, exhaust tips, & mounting hardware (Traxxas part #8314) are not includedFits4-Tec 2.0

These are the RPM Red Rear Suspension A-Arms for Traxxas Slash 2WD XL-5 and VXL electric trucks.RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash 2wd - They are not multi-platform A-arms like the stock versions.Our first...

These are the RPM Traxxas Slash 2WD Black LCG Nerf Bars for use on Slash 2WD trucks running the low-CG chassis. The chassis layout of the low center of gravity chassis (LCG) Slash 2wd is different than the original high center of gravity chassis (HCG),...

This is the Traxxas 4-Tec 2.0 Rear Bumper and Rear Body Mount Set. This is used on both the Ford GT and Mustang GT versions.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Front Upper and Lower Bumper Set. This is used in both the Ford GT and Mustang GT version.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Sealed Receiver Box, Cover, Servo Mount and Hardware. This fits both Ford GT and Mustang GT versions.IncludesSealed receiver boxSteering servo mountReceiver coverAccess plugFoam padsSilicone grease2.5x10 Cap Screws...

This is the Traxxas 4-Tec 2.0 Front and Rear Body Mount Set, for use with #8311 series Ford GT bodies.Fits4-Tec 2.0

These are the Traxxas TRX-4 Crawler Left and Right Front Inner Portal Drive Housings and 2.5x4mm Screws (6).FitsTRX-4

This is the Hot Racing Aluminum Hard Anodized Black GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16 Grave Digger, and 1/16 Mustang. These will also work with...

This is the Hot Racing Aluminum 6mm Offset 17mm Hex Hubs for the Traxxas 1/10 Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +12mm per side.FEATURES:- Black anodized CNC machined aluminum hex adapter- Blue...

This is a pair of Traxxas X-Maxx GTX Assembled 110mm Steel Shock Shafts with rod ends and hollow balls.FeaturesSteel construction with chrome finishComposite plastic rod ends and pressed-in ball linksIncludes2 Shock Shafts with Rod Ends...

This is the Traxxas Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). Replacement GTR shock retainer Includes: upper and lower spring retainers (2), upper caps...

This is the Traxxas Primary Shaft, 1st Speed Hub, and One-Way Bearing for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.IncludesOne Primary ShaftOne One-Way BearingOne Snap RingOne spacerFitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Black Chrome Front and Rear Bumper Set for the Revo 3.3, 1/10 E-Revo, and 1/10 E-Revo Brushless Trucks.Fits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo 3.3

This is the Traxxas Waterproof Sealed Receiver Box with Hardware for vehicles like the E-Maxx Brushless, Slash 4x4, and Blast boats.FitsBlastE-MaxxE-Maxx BrushlessSlash 4x4Slash 4x4 PlatinumSlash 4x4 Ultimate