This is the E-Flite 150mAh 1-Cell 3.7V 25C Li-Po Battery. It is used in many airplanes and helicopters, such as the E-Flite UMX Ultra-Micro series airplanes, Parkzone and Hobbyzone airplanes, and the Blade Nano QX Quad, mCX, and mSR Helicopters...

This is a Traxxas Rod End Set for the optional GTR shocks on the Revo. Features: Plastic construction Black in color Includes: Six Rod Ends Specifications:Length: 18.35mm (0.72")Width at ball joint: 10.35mm (0.40") Comments: If Pivot Balls are...

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne adhesive foam pad Requires: The remainder of the EZ...

This is a set of Force Upper Main Blades for the MH-35 and FHX combat helicopters.

This is a set of Force Lower Main Blades for the MH-35 and FHX combat helicopters.

This is a pair of Assembled and Glued Tires and Wheels for the Traxxas Summit. FEATURES Canyon AT tires with angular lugs Geode chrome plated plastic wheels with 17mm hex INCLUDESTwo Tires and Wheels for the Traxxas Summit REQUIRESSidewall...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, +20% Rate, Blue (2). Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without compromising big-hit capability Durable powdercoated...

This is the Rear Plastic Skidplate for the T-Maxx 3.3. FEATURES Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in color INCLUDESSkidplate and stainless steel plate REQUIRESInstalling on chassis with four 3x12mm...

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R. FEATURES Constructed of plastic these posts and mount attach the body to the chassis INCLUDESTwo Front Body Mount Posts Rear Body Mount and...

This is a replacement set of skid plates for the Traxxas Stampede. Black front and rear skid plates for Traxxas 2WD Stampede models. FEATURES Made of black molded nylon For the Traxxas Stampede SPECSLength of front plate: 5 5/8"Thickness of front...

This is the Dynamite Startup Tool Set for Traxxas Nitro and Electric Vehicles. Features Engineered specifically for Traxxas vehicle owners Contains most every tool needed in order to maintain a Traxxas vehicle Conveniently packaged in a durable...

This is the Integy Silver Aluminum Steering Bellcrank Set for the Traxxas Rustler, Slash 2WD, and Bandit FEATURES Aluminum construction, Silver in color Four 6x12mm ball bearings for super smooth operation INCLUDESOne set of steering...

This is a set of Team Integy Silver Aluminum Rear Lower Suspension Arms for use on the Traxxas Stampede and Rustler VXL and XL-5 Vehicles. FEATURES Aluminum construction Silver in color INCLUDESOne left and one right lower rear...

This is the Robinson Racing Extra Hard 16-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...

This is the optional Blue Traxxas Resonator Dyno-Tuned Performance Pipe for the Traxxas Jato, Nitro Rustler and Nitro 4-Tec with TRX Racing Engines. FEATURES:The Traxxas Resonator aluminum tuned pipe is specifically engineered to fit right in the...

This is the Receiver Box for the T-Maxx 3.3. FEATURES:Holds receiver and Optidrive Shift Module in placeTwo piece, gray in color, constructed of hardened plastic INCLUDES:Receiver Box and Body Clip REQUIRES:Fastening to chassis, installing components and...

These are the Traxxas Tubes Lightweight Red Aluminum Turnbuckles for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks.FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket...

This is an optional Wheelie Bar Mount for the Traxxas Electric Stampede, Rustler and Bandit. FEATURES:Constructed of hardened plastic, black in colorInstalls at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES:Assembled optional...

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...

This is a package of Aluminum Pushrod Spacers for the Traxxas Revo. These are installed on the Progessive suspension system. FEATURES:Red anodized aluminum construction INCLUDES:Eight 4x6x3mm spacers REQUIRES:Nothing.  These are direct fit parts.

This is a Traxxas Jato 2.5 and 3.3 Shim Set.  This includes four silver metal hollow balls and four 3mm silver washers.  These are for adjusting the roll center of the truck.

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned Performance Pipe for the Revo 2.5 and 3.3 monster trucks.  This gives the Revo nearly 20% more power on the bottom-end, where it is needed most when accelerating hard.  This...

This is the Traxxas Center Differential Kit for the Revo 3.3. This also includes the forward-only conversion kit as part of the setup.Features Direct drop-in for the Revo 3.3, standard chassis Revos require the Accessory Rear Output Shaft...

This is a Traxxas T-Maxx Slide Carb Linkage Set, including the throttle link, brake link, and hardware. This works on T-Maxx 2.5 and 3.3 trucks with a slide carb.IncludesOne long linkage wire (160mm)One medium linkage wire (100mm)One short linkage wire...

This is a pair of Traxxas Jato 2.5 and 3.3 Throttle Return Springs.  You don't want to run a truck without this on it.

This is an Integy 1.5mm Replacement Tip for the Team Integy Ti-Nitride Hex Wrench Set.  This is an inexpensive way to get your tools back in perfect condition again. FEATURES Hex wrench tips have a high degree of tolerance to lock screws...

This is replacement Traxxas Fuel Tank Pull Ring, Cap, and Shutoff Clamp for the Revo 2.5 and 3.3 trucks.   Fuel tank cap Kit with pull ring, tank cap, and engine shut-off clamp

This is a Traxxas Heavy Duty Servo Saver Spring for the Revo 2.5 and 3.3.  This servo saver spring should be used when using metal geared servos.

This is a Traxxas Revo Transmission Skid Plate and Roll Hoop Set for the Traxxas Revo 2.5 and 3.3 trucks.  If you crack or break these, you should always fix them.  Without fixing them, you can have big expenses down the road.

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is a Traxxas Lower Chassis Brace Set for the Traxxas T-Maxx .15, 2.5, S-Maxx, Stadium Maxx, and E-Maxx (model 3906).  These are stock replacements. FEATURES:Replaces damaged chassis braces.Constructed of black plastic...

This is an RPM Black Rear Upper and Lower Suspension A-Arm Set for the Traxxas Revo 2.5 and 3.3 trucks.  This includes one rear upper and one rear lower arm.  These will work on either side of the truck.  If you would like to upgrade both...

This is an Integy Red Aluminum Rear Skid Plate for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and all other Maxx series trucks.  It will fit all versions of the T-Maxx and E-Maxx.  As you can see in the picture,...

This is the Traxxas TRX-4 Wide Inner Fenders (Front and Rear) Wide inner front and rear fenders for clipless TRX-4 bodies. Includes: Rock light covers (8), Battery plate, and 3x8 screws (4)

This is the Traxxas Orange LED Whip Light w/ Flex-Tech Mount Orange whip light with Flex-Tech spring-loaded mount. Includes: 3x12 screws (2). Fits: Left or Right Side. Sold Individually. Requires: TRA6588X accessory power supply.

This is the Traxxas Green LED Whip Light w/ Flex-Tech Mount Green whip light with Flex-Tech spring-loaded mount. Includes: 3x12 screws (2). Fits: Left or Right Side. Sold Individually. Requires: TRA6588X accessory power supply.

This is the Traxxas Blue LED Whip Light w/ Flex-Tech Mount Blue whip light with Flex-Tech spring-loaded mount. Includes: 3x12 screws (2). Fits: Left or Right Side. Sold Individually. Requires: TRA6588X accessory power supply.

This is the Traxxas Red LED Whip Light w/ Flex-Tech Mount Red whip light with Flex-Tech spring-loaded mount. Includes: 3x12 screws (2). Fits: Left or Right Side. Sold Individually. Requires: TRA6588X accessory power supply.

This is the GPM Stainless Steel Skid Kit Center Chassis Guard Center skid is a precision formed stainless steel plate designed to reinforce the Traxxas Mini Maxx chassis. At 2mm thickness the integrated guard improves impact resistance and reduces the...

This is the GPM Stainless Steel Side Chassis Skid Plate 2mm Stainless Steel side chassis skid plate is produced to strengthen the lower edge of the Traxxas Mini Maxx chassis. The plate delivers consistent impact and deformation resistance while limiting...