These are the Traxxas Forward and Reverse Primary Gears for Revo 3.3, T-Maxx 3.3 (with reverse), and Slayer trucks.IncludesOne Plastic Forward gearOne Steel Reverse gearOne Steel retaining clipOne copper gear washerOne gear pinOne instruction sheet ...

These are the Traxxas Aluminum Rocker Arm Posts (4) for Revo 3.3, 1/10 E-Revo, and Slayer trucks. Upgrade to these to save weight over the stock steel rocker posts.Includes: Four aluminum rocker arm postsFits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo...

This is the Traxxas Chrome Rear Bumper and Hardware for the Revo 3.3, 1/10 E-Revo, and 1/10 Summit trucks.IncludesOne rear bumperOne bumper mount(2) 4X10mm button head screws(2) 3X26mm button head screwsFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is the Traxxas Front and Rear Splined Center Half Shaft Set with Metal U-Joints for the Traxxas T-Maxx 3.3 trucks.FeaturesConstructed of hardened composite material with steel U-jointsCenter front and center rear driveshaft assembliesIncludesTwo...

This is a package of six Traxxas 4x10mm Button-Head Hex Machine Screws.Replacement part forE-Revo VXL BrushlessFord Fiesta ST RallyHoss 4X4 VXLMaxxRevoRustler 4X4 VXLSlash 4X4 UltimateSlayer Pro 4X4SummitUnlimited Desert Racer

This is the Traxxas Blue Aluminum 39mm Camber Link Turnbuckle assembled with rod ends and hollow balls. Search our store for part 3741A for complete camber link set.Fits:1/10 Monster Jam TrucksBigfootCraniacNitro SlashRustler VXLRustler XL-5SkullySlash...

This is the Traxxas Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease. This is for use on with the 3628 waterproof receiver box. Refresh your 3628 sealed receiver box with this seal kit. Includes new O-ring, foam seal, and silicone grease...

This is the Traxxas Servo Case for 2055 servo. This is Traxxas part number 2052.

This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESOne front bulkhead REQUIRESInstallation on chassis Replacement part forHoss 4X4 VXLSlash 4X4 VXLSlash 4X4Stampede 4X4 VXL

These are the Traxxas 2.8" Chrome Rear All-Star Wheels for electric Rustler and Stampede 2WD trucks.Fits1/10 Monster Jam TrucksCraniacMonster JamRustler VXLRustler XL-5SkullySon-Uva-DiggerStampede VXL 2WDStampede XL-5 2WD

These are the RPM Black Revolver 2.2/3.0 Wheels for the front/rear of Traxxas 1/10 Slash 4x4, and rear of Slash 2WD Short Course trucks. These feature splined drives instead of hexes for incredible strength. Spline adapters are included.These could also...

This is the RPM Blue Wide Front Bumper for the Traxxas electric Rustler, electric Stampede 2WD, Bandit, Nitro Rustler, and Nitro Stampede trucks. At over six inches wide, this offers the ultimate in protection for your ride!Give your favorite Traxxas...

These are the RPM Green Front Upper & Lower Suspension A-Arms for Traxxas 1/16 E-Revo and 1/16 Grave Digger trucks.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What...

This is a pair of Traxxas GTR Shock Springs (Long .653 Green) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

This is the Traxxas Center Differential Housing for the Slash 4x4 and 1/10 Rally vehicles equipped with a center differential. It's a direct replacement for the Slash 4x4 Platinum, and also works on Slash 4x4 and Rally vehicles running the center diff...

This is the Traxxas Complete Differential Assembly for the 1/16 scale E-Revo, Summit, Slash, Rally, and other Traxxas 1/16 vehicles.Includes: One complete differential assembly

This is a set of Traxxas Body Mounts for the Front or Rear of the Slash 4x4 or Stampede 4x4 Truck. Body mount includes body mount posts (2) and body post extensions (2). Fits: Front or Rear. Replacement Part ForSlash 4X4 UltimateSlash 4X4 VXLSlash...

This is a replacement Black Wing with Decals for the Traxxas 1/16 E-Revo VXL Truck.FeaturesNylon constructionBlack in colorIncludes:One WingOne Decal SetSpecificationsLength: 118mm (4.6")Width: 43mm (1...

This is the Team Integy Super Brushless Motor Heatsink with cooling fan for use on the Traxxas 1/16 E-Revo and Slash VXL. This heatsink snaps onto the motor can.FEATURESAluminum construction silver...

This is the Traxxas Rear Bumper and Mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck. Features: Nylon construction Black in color Includes: One Rear Bumper and bumper mount

This is a set of Traxxas Axle Pins.These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. Features: Axle pins are steel Includes: Four 2.5x12mm axle pins Replacement part for these modelsRevoSlayer...

This is the optional Variable Damping Kit for GTR Shocks found on the Traxxas Revo 3.3 RTR and the Traxxas E-Revo RTR. FEATURES Nylon construction Enhances tuning ability of suspension by controlling compression and rebound rate of...

This is a set of RPM Blue Nerf Bars for the Traxxas Slash 2WD and Slash 4x4 standard chassis trucks. This will not fit trucks with a low-CG chassis (does not fit Slash Ultimate).Nerf bars play an extremely important function in the overall durability of...

This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...

These are the Servo Mounts for the T-Maxx FEATURES:Machined Light-Weight Aluminum construction, anodized blue INCLUDES:Aluminum Servo Mounts (left and right)4 3x10 Buttonhead Cap Screws4 3x8 Buttonhead Cap Screws2 3x6 Buttonhead Cap Screws8 Metal...

This is the 19-Tooth Pinion Gear (48-Pitch) 3 mm Bore 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...

This is the optional Single Motor Plate for the Traxxas E-Maxx 16.8V RTR - TRAC92**. FEATURES:Aluminum construction, blue in colorDesigned for a clean install of a single brushless motor system in the E-Maxx 16.8V RTR (requires gear cover number...

This is the Brake Disc for the Traxxas Nitro Jato Stadium Truck. FEATURES:Composite constructionGrey in color INCLUDES:One Composite Brake Disc REQUIRES:Assembly onto Vehicle

This is a set of two (2) Traxxas 4mm x 7mm x 2.5mm Blue Rubber Shielded Ball Bearings.  These are factory replacements.  These fit several Traxxas models. Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal...

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...

This is the Pro-Line '72 Chevy C-10 Long Bed Truck Body for use with the Traxxas Revo 3.3, LST, and MGT trucks.  The body is supplied clear. Features: Made of durabable .060" (1.52mm) thick lexan plastic Perfect fit and porportions for Revo,...

This is the Hitec HS-65HB Mighty Micro Feather Servo with the Universal Connector.  Because this has the universal connector, it will work with JR, Hitec, Futaba, and Airtronics Z radio systems.  This is great for micro helicopters, park...

This is replacement Traxxas Rear Upper and Lower Suspension Arm Set for the Revo 2.5 and 3.3 trucks.  This set will work for the left or right side.  If you need to replace both sides, purchase a quantity of "2"...

This is a set of replacement Traxxas Front Right Upper and Lower Suspension Arm Set  for the Revo 2.5 and 3.3 trucks.  If you need the left side as well, search our store for TRA5332.  It is a good idea to have these on...

This is a Traxxas Revo 2.5 and 3.3 Steel Suspension Hinge Pin Set for the front or rear of the truck.  There are enough pins included to replace the hinge pins in the front or rear of the truck.  To replace all of...

This is a Traxxas Revo 2.5 and 3.3 Steel Pushrod Set (2 rods) with rod ends for use with Progressive 3 Rockers (part TRA5359).  If you would like to replace the front and rear pushrods, purchase a quantity of "2" packs of these rods. Pair of...

This is a Traxxas Front and Rear Shock Mount Set for the Revo 2.5, 3.3, and Slayer trucks.  Included is one front shock mount, one rear shock mount, four chassis wire clips, four 3x32mm caphead machine screws, and four 3x6mm buttonhead...

This is the Viper Scale Racing Viper V Gold .010" Pro Series Pickup Springs (5 pr) Gold springs typically are a tad stiffer than the non plated springs of the same wire size. We treat the gold springs as an in-between tension. Which for example a .010...