This is the Traxxas Orange Aluminum Chassis Brace Kit for Rustler 4x4 & Slash 4x4 Low-CG Chassis Designed for the ExtremeThe heavy-duty chassis brace fits Slash 4X4 models equipped with the low-CG chassis and all Rustler 4X4 models. Made from thick...

This is the Traxxas Rustler 4x4 Battery Hold-Downs (3) w/Hardware (fits 6723R chassis with 162mm long battery compartment). The extended battery hold-down set fits the 6723R chassis with the 162 mm battery compartment. The set includes battery...

This is the Traxxas Rustler 4x4 Chassis w/162mm Long Battery Compartment (use with 7430R front bulkhead & 6726X battery hold-down). Chassis with extended 162 mm long battery compartment accommodates flat-style battery packs. For use...

This is the Traxxas Rustler 4x4 Body Reinforcement Set for #6717 Bodies. The Rustler 4X4 body reinforcement sets provide added protection for your Rustler 4x4 during extreme driving. These high-strength composite reinforcements help spread impact forces...

This is the Traxxas Regulated 3-Amp 3V Accessory Power Supply w/Power Tap Connector. The accessory power supply provides a regulated 3-volt power output for stable, flicker-free LED performance. Includes: power tap connector, 3x10 mm screws (2), and 2...

This is the Traxxas 1/10 Summit Complete 2-Speed Transmission. This is a complete replacement 2-speed transmission with slipper clutch, and spur gear. The Pro-Built 2-speed transmission arrives ready-to-install and precisely assembled to Traxxas’...

This is the Traxxas 13-Tooth 0.8M 32-Pitch Pinion Gear w/5mm Bore, Includes Set Screw. 13-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing...

This is the Traxxas 11-Tooth 0.8M 32-Pitch Pinion Gear w/5mm Bore, Includes Set Screw. 11-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing...

This is the Traxxas Revo 3.3 Complete Transmission.  This is a complete replacement 2-speed transmission with brake, slipper clutch, and spur gear.

This is the Traxxas 20x32x7mm Black Rubber Sealed Ball Bearings (2). Pair of 20x32x7 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas 8x16x5mm Black Rubber Sealed Ball Bearings (2). Pair of 8x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas 12x21x5mm Black Rubber Sealed Ball Bearings (2). Pair of 12x21x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas 17x23x4mm Black Rubber Sealed Ball Bearings (2). Pair of 17x23x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas T-Maxx 3.3 Complete Transmission.  This is the complete replacement 2-speed, forward only transmission, including brake, slipper clutch, and spur gear. The Pro-Built 2-speed transmission arrives ready-to-install and precisely...

This is the Traxxas ESC Mounting Plate (for installation of XL-5/VXL into Bandit or Rustler). Speed control mounting plate. Replacement part forBandit VXLBanditRustler VXLRustler

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...

This is the Traxxas ESC/Receiver Box Mounting Plate for Installation of XL-5/VXL & Waterproof Receiver Box on Stampede 2WD. ESC mounting plate for 2WD Stampede models.   Replacement part forBIGFOOT No. 1 Officially Licensed ReplicaStampede...

This is the Traxxas Velineon 540XL Brushless 2400Kv 70mm Motor (Assembled with 6.5mm Gold-Plated Bullet Connectors) (Not for use in Marine Models) The Velineon 540XL brushless motor delivers massive torque with brushless efficiency. Motor comes equipped...

This is the Traxxas Heat Sink for 3351R and 3461 Motors. The aluminum heat sink fits Velineon 3500 and 540XL brushless motors when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan...

This is the Traxxas Cooling Fan Kit for 3351R and 3461 Motors (requires #3458 heat sink to mount). Lower your Velineon brushless motor’s temperatures with this cooling fan and shroud. The fan shroud screws onto the 3458 heat sink (sold separately)...

This is the Traxxas Complete Differential for the electric 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This is a great option for a quick and easy diff replacement. Compatible With Bandit VXLBandit XL-5CraniacRustler VXL 2WDRustler XL-5...

This is the GPM Racing Gunmetal Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

This is the GPM Racing Green Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

This is the Traxxas X-Maxx Rock N Roll Painted Body Assembled with Tailgate Protector and all Body Supports and Mounts Pre-Installed on the body.  This wild paint scheme is a great way to refresh your X-Maxx in minutes.  Pull it out of the...

This is the Gen3 RC 6061-T6 Orange Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...

This is the Lectron Pro Dual Port 100W LiPo, LiFe, LiHV, NiMH, and NiCd Charger for use with AC or DC power input. With an output of 50W per channel, this charger is an economical way for most hobbyists to get a couple packs charged quickly. This...

This is the GPM Racing Heavy Duty Steel Front CVD Driveshaft Set with Stub Axles for Traxxas Unlimited Desert Racer trucks. These beefed up shafts are 6.5mm thick at the center versus 4.5mm stock, and HD steel stub axles for extreme durability.This is an...

This is the GPM Racing Red Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance. Stainless steel mounting hardware is included.These are an...

This is the Traxxas TRX-4 Expedition Rack and Mounting Hardware for use with the TRX-4 Sport body.

This is a pair of Traxxas Unlimited Desert Racer 139mm GTR 1.250 Rate Blue Stripe Progressive Shock Springs.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 12-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...

This is a pair of Traxxas Blue Rear Springs for use on XXL Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD Unassembled KitSlash VXLSlashStampede 4X4 VXLStampede...

This is the Hot Racing Hardened Steel 48-Pitch 1/8" Bore Pinion Gear Set. This set includes a 24-tooth, 26-tooth, 28-tooth, and 30-tooth pinion gear.This set of gears is great for Traxxas Rustler XL-5, VXL, Stampede 2WD, Slash 2WD, HPI Savage XS, and...

This is the Hot Racing Aluminum Dual Water Pick-up Rudder Blade for the Traxxas DCB M41 Catamaran Boat. Add this to your boat for improved cooling options.FEATURES:- CNC machined billet aluminum construction- Dual water pickup for additional cooling-...

This is the Traxxas Cush Drive Transmission Input Shaft.Replacement part forX-Maxx XRT

This is the Traxxas X-Maxx ProGraphix Body with Decals. The body comes with graphics pre-printed, and allows you to spray one final color for a professional finish, even for beginners!FeaturesTrimmed with printed graphics applied (requires final color ...

This is the Traxxas X-Maxx Body with Masks & Decals (clear, requires painting). Set your X-Maxx apart from others with a custom paint scheme using this body!FeaturesMolded from clear polycarbonate plasticAllows X-Maxx drivers to create their own custom...

This is the Traxxas XO-1 Wing (Exocarbon) with Wing Mounts (2) and Washers (2) The XO-1 Exo-Carbon wing adds a glossy, high-tech carbon-fiber look to your supercar. The innovative Exo-Carbon finish forms a tough skin over the standard composite wing...

This is the Traxxas XO-1 Wing Includes Wing Mounts (2)Washers (2)Accessory Part ForXO-1