These are the Traxxas X-Maxx and XRT Suspension Pin Retainers. This includes four pin retainers.Features Molded composite plastic construction Installs with inner suspension pins on upper suspension arms to hold pins in place Includes: Four Suspension...

This is the Traxxas X-Maxx Lower Left Suspension Arm. This arm can be used on the front or rear of the truck.Features Molded composite plastic construction Fits lower left front or left rear suspension Fastens to lower section of caster block and...

This is the Traxxas X-Maxx Lower Right Suspension Arm. This arm can be used on the front or rear of the truck.Features Molded composite plastic construction Fits lower right front or right rear suspension Fastens to lower section of caster block and...

This is the Traxxas Receiver Battery Wiring Harness with On/Off Switch and Charge Jack for the Revo and Slayer nitro trucks. This can be used with other nitro vehicles using rechargeable receiver batteries as well.

This is a pair of RC4WD Mud Slinger 2 XL 1.9" Scale RC Rock Crawler Tires with Foam Inserts. These are made with X2 SS soft/sticky compound rubber for excellent off-road traction.FEATURES: Advanced X2 SS compound (super soft & sticky)INCLUDES: Two Mud...

This is the RPM Tail Light Set for RPM Traxxas Slash 2WD, Slash 4x4, and Associated SC10 2WD Bumpers. These are designed for use with the RPM bumpers listed below. They will not work on stock bumpers.Our bumper and roof light sets for the Traxxas Slash...

This is the RPM Black Rear Heavy-Duty A-Arm Set for the Traxxas Bandit XL-5 and VXL buggies.. RPM Rear A-arms for the Traxxas Bandit are finally here to strengthen the rear end of these already tough 1/10th scale buggies. RPM rear Bandit A-arms...

This is the RPM Black Axle Carriers for the Traxxas 1/16 E-Revo, 1/16 Slash, and 1/16 Summit. This fits brushed and VXL brushless versions.There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of...

This is a Traxxas Latrax Complete Motor Set for the Alias Quadcopter. Complete set of Alias motors includes clockwise (2) and counter-clockwise (2) motors Features: Red connectors on the clockwise motors Black connectors on the counter-clockwise...

This is the Team Integy Steel Roll Cage for the Traxxas 1/16 scale E-Revo and E-Revo VXL trucks. FEATURES Constructed of welded steel for maximum durabilityMatte black finish INCLUDESSteel Roll Cage with Mounting Hardware

These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (.12") Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is the Integy Blue Aluminum Wheelie Bar for the Traxxas Rustler, Bandit, & Slash 2WD. This will fit the electric XL-5 and VXL 2WD versions of these vehicles. FEATURES Blue aluminum construction One inch hard rubber wheels INCLUDESOne Blue...

This is the Traxxas Bigfoot #1 Clear Body (Requires #3747 Body Support for Clipless Mounting) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix paint makes it easy to get...

These are the Hot Racing 108mm Rear Suspension Limit Straps for the Traxxas Unlimited Desert Racer (UDR). Hot Racing scale functional suspension limit straps limit suspension travel for the Traxxas UDR. Limit straps are used to take stress off shocks...

These are the GPM Racing Red Aluminum Brake Disks with +3mm Offset Hex for Traxxas Unlimited Desert Racer trucks. These feature a silver disk surface for ultra-realistic looks. Made of 6061-T6 aluminum and anodized with a color finish, these look...

This is the GPM Racing Blue Stainless Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with the main...

This is the Futaba 3PRKA 2.4GHz transmitter with the R203GF receiver. The Futaba 3PRKA is an outstanding value in basic 2.4GHz control, whether you're looking at it as an inexpensive start-up system or an economical upgrade for your RTR. This system...

These are the Pro-Line Interco Bogger 1.9" G8 Rock Terrain Tires with Foam Inserts. These massive 5.4" tall x 1.91" wide tires are perfect for guys looking to do some Mud Bogging with their rigs or for recreating a beloved full size truck in perfect...

This is the Traxxas Unlimited Desert Racer 6061-T6 Aluminum Center Rear Driveshaft with Two 3mm Screw Pins.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Bigfoot #1 Officially-Licensed Replacement Body with window masks and decal sheet. The body is supplied clear as shown, ready for your choice of paint color.The chrome grill and body accessories are sold separately, part numbers...

This is the Traxxas 4 AA Battery Holder for Receivers in Nitro vehicles like the Jato, Nitro Rustler, T-Maxx, and others. Jato 4 AA battery holder with Futaba-style connector. No On/Off switch.Includes: One 4 cell AA Battery Holder w/Receiver Connector...

This is the Traxxas Gear, 11-T pinion (32-p) (mach. steel)/ set screw. 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can...

This is the Traxxas Differential Gear Set with diff output gears, spider gears, spider gear shaft, and diff carrier support. This fits 1/10 E-Revo, Revo 3.3, Summit, E-Maxx, T-Maxx, and Slayer trucks.IncludesTwo Output GearsTwo Spider GearsSpider Gear...

This is a set of ten Traxxas PTFE-coated 6x8x0.5mm washers (10).Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitNitro SlashRevo 3.3SlayerSlayer ProS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is a pack of Traxxas 4x12mm Countersunk Machine Screws (100-degree). Each package includes six screws.Fits:1/10 Monster Jam TrucksBandit XL-5CraniacRustler XL-5SkullyStampede XL-5 2WD

This is an assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. Includes: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock C-clips and 3 body clips.

These are RPM Camber Links for the Traxxas Electric Rustler and Electric Stampede 2WD vehicles. RPM’s heavy-duty camber links will completely eliminate broken camber links on your Rustler or Stampede 2WD! RPM guarantees it! These camber links are...

This is the 25-tooth Pinion Gear (48-pitch) with Set Screw 25-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is a pair of Traxxas 2.8" Mounted Alias Rear Tires on All Star chrome wheels. These are perfect for the rear of the Traxxas Rustler XL-5 and VXL vehicles. FEATURES:2.8" All Star chrome wheelsRibbed pattern tires INCLUDES:Two 2.8" mounted tires,...

This is the Battery Expansion Kit for the Traxxas Rustler and Stampede 2WD, and Monster Jam trucks. It will fit both the XL-5 brushed and VXL brushless models. The package includes hardware to raise the electronic speed control mount and battery posts...

This is an RPM Black Upper and Lower Suspension A-Arm set for the Traxxas T-Maxx 2.5, 2.5R, 3.3, as well as the E-Maxx trucks.  These will also fit other trucks that came with the WideMaxx suspensions such as the SportMaxx...

This is the Team Integy 53-Tooth Steel Spur Gear for the Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 trucks.  This is MUCH stronger than a plastic spur gear.  The Integy spur gears feature color-coded rings to allow easy identification...

This is the Savox SW-0267MG Micro Waterproof Standard Digital Servo 0.135 / 83.3oz @ 6V The SW-0267MG is a budget friendly, waterproof, high torque, digital servo in a slightly taller case than most standard sizes. The wire exits vertically from the...

This is a pair of GPM Racing Red Aluminum Spare Tire Locking Nuts for the Traxxas Unlimited Desert Racer (UDR) trucks. The replace the stock locknut for a far more realistic appearance. They are made of 6061-T6 aluminum and anodized for a fantastic...

This is the GPM Racing Black Aluminum Front/Rear Gearbox Skid Plate for Traxxas TRX-4 scale trail trucks and rock crawlers. Made of lightweight 6061-T6 aluminum with an anodized finish, these are durable and look great. These can be mounted on the...

This is the GPM Racing Complete Stainless Steel Heavy-Duty Tie Rod and Suspension Link Set for Traxxas Rustler 4x4, Slash 4x4 low-CG trucks such as the Ultimate & Platinum, and 1/10 Rally vehicles. This set comes with front camber links, steering links,...

This is the GPM Racing Orange Aluminum Transmission & Spur Gear Cover for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a replacement for Traxxas part 3792.Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas...

This is the Traxxas Rustler 4x4 Black Wing with 3x8mm Flathead Capscrews (3).Stock Replacement OnRustler 4x4 BrushedRustler 4x4 VXL

This is a full set of four Traxxas 1.9" Response Tires Pre-Mounted on Split Spoke Black Chrome Wheels for the Traxxas 4-Tec 2.0 cars. Foam inserts are pre-installed as well. The set includes two front wheel/tires, and two extra-wide wheel/tires for the...

This is the Traxxas 16-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...