This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is the Pro-Line 1978 Chevy C-10 Race Truck Clear Body for 1/10 Short Course Trucks like the Traxxas Slash 2WD & 4x4.The body is supplied clear, but is painted in the image to better show the design. Truck is not included.Pro-Line now has the...

This is the GPM Racing Blue Aluminum Adjustable Rear Stub Axle Stabilizer and Tie Rod Set for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance. Stainless steel...

This is the Hot Racing Blue Aluminum Servo Saver for 23-25 Spline Servos. 23, 24, and 25 spline adapters are included, for use with servos from Futaba, Savox, Traxxas, Tactic, Hitec, JR, Spektrum, Sanwa, and KO servos.FEATURES:- CNC 6061-T6 aluminum...

This is the Hot Racing Pro Connector Soldering Jig. This tool is ideal for soldering and all types RC connectors. The jig quickly and securely clamps, holds, and releases these connectors for your soldering tasks.Jig clamp holds the most RC connectors,...

These are the GPM Racing Black Aluminum Brake Disks with +3mm Offset Hex for Traxxas Unlimited Desert Racer trucks. These feature a silver disk surface for ultra-realistic looks. Made of 6061-T6 aluminum and anodized with a color finish, these look...

These are the RPM Blue Front Bearing Carriers / Steering Blocks for Traxxas Slash 2WD, Nitro Slash, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, Skully, Craniac, and Bigfoot trucks. These replace Traxxas 3736 steering blocks, and require using...

This is the X-Maxx 17-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 17-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model...

This is Z-Poxy Finishing Resin from Pacer. Specially formulated to have excellent bonding characteristics with fiberglass, wood and foam, Z-Poxy finishing resin is a must-have accessory for many workshops. It has a working time of 20-30 minutes,...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20 PTFE-coated 5x8x0.5 mm...

These are the Traxxas Unlimited Desert Racer BFGoodrich Baja KR3 Tires and Foam Inserts (2). Replica BFGoodrich KR3 Tires duplicate the 40" treads used on desert racing trucks for the Unlimited Desert Racer. Designed to fit 8471Method Racing Wheels. Sold...

This is the Hot Racing Power Up Slipper Eliminator for Traxxas Slash 2WD & 4x4, Stampede 2WD & 4x4, Rustler, Bandit, 1/10 Rally VXL, and Jato 3.3. This will work on the XL-5 brushed and VXL brushless versions of the electric trucks.FEATURES:- Eliminates...

This is the Traxxas 11-Tooth Front HD Differential Pinion Gear. This must be used with the #7792 35-tooth diff ring gear. FitsX-MaxxXRT

This is the Traxxas Aluminum Heat Sink for the Traxxas Velineon VXL 380 Brushless Motor in 1/16 scale VXL models. This will fit the brushless 1/16 E-Revo VXL, Summit VXL, Slash VXL, Rally VXL, Ford Mustang Boss 302, and any other 1/16 VXL brushless...

This is the Aluminum Wheelie Bar Axle for the Traxxas Drag Slash. FEATURES:Charcoal Gray in color INCLUDES:(1) Wheelie Bar Axle (3x12 BCS)(2) Threadlock Hardware

This is the optional Assembled Wheelie Bar/Wheelie Bar Mount for the Traxxas Drag Slash. FEATURES:Black Chrome in color INCLUDES:One Assembled Wheelie Bar/Wheelie Bar Mount REQUIRES:Installation on the Traxxas Drag Slash 

This is a pair of Traxxas E-Revo 2 Talon EXT 3.8 Tires and Foam Inserts. This includes two tires and two foam inserts.Stock Replacement OnE-Revo 2.0

This is the Traxxas X-Maxx Replacement Front Bumper.FeaturesOne-piece molded composite plastic constructionIncludes: Front BumperSpecificationsLength: 8.7" (222mm)Height: 3.4" (87mm) measured at grille guard

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet...

This is the Replacement 72 Spur Gear for the Traxxas Nitro Rustler and Nitro T-Maxx Trucks. FEATURES:Black plastic, slipper clutch style spur gear. INCLUDES:One 72 tooth spur gear REQUIRES:The other parts of that make up the slipper clutch are:#TRA1994 -...

This is the Hot Racing CNC Pro Polished Brass Propeller with Stainless Steel Bullet Prop Nut and Drive Dog for use with Traxxas Spartan and M41 boats. Upgrade to a metal propeller on your boat for improved performance and durability.FEATURES:- Cast brass...

This is the Hot Racing CNC Pro Polished Brass Propeller with Bullet Prop Nut and Drive Dog for use with Traxxas Spartan and M41 boats. Upgrade to a metal propeller on your boat for improved performance and durability.FEATURES:- CNC machined billet Brass...

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. Set of six 3x12 mm shoulder screws (shock attachment screws) with hex-drive heads. FEATURES Black steel construction INCLUDESSix steel shoulder screws SPECSLength: 12mmDiameter:...

These are the Traxxas Paddle Tires Pre-Mounted on 3.8" Black Wheels. These come fully-assembled, glued, with foam inserts installed. The wheels have a 17mm splined hex. Whether ripping across the sand dunes, mud, or a fresh layer of snow, a set of...

This is the GPM Racing Green Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft...

This is the GPM Racing Complete Spring Steel Adjustable Tie Rod and Camber Link Set for Traxxas Slash 2WD electric trucks. This set will work with all electric 1/10 Slash 2WD trucks. Included are two steering toe links, four camber links, a steering...

This is the Hot Racing Blue Aluminum Servo Horn for Traxxas X-Maxx 6S and 8S trucks. This replaces the Traxxas 7747 / TRA7747 factory servo horn.FEATURES:- CNC machined 6061 aluminum, anodized blue- Replaceable lock nut to help prevent loosening of...

These are the Traxxas Response Pro Tires and White Dished Wheels with 17mm Splined Hexes. The tires are mounted and pre-glued, making these a bolt-on part to get you back on the track right away!FeaturesSoft rubber compound design tires are pre-glued to...

This is the Traxxas 2-Channel Wireless-Ready TQi 2.4 GHz Transmitter Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 2-channel (transmitter only)

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Traxxas Transmitter TQi Traxxas Link Enabled 2.4GHz High Output 4-Channel (Transmitter Only) The 4-channel TQi transmitter combines a full complement of tuning features with the long-range convenience of 2.4GHz technology. Automatic model...

This is the Traxxas Transmitter TQi Traxxas Link enabled 2.4GHz high output 2-channel (Transmitter Only) The 2-channel TQi transmitter combines a full complement of tuning features with the long-range convenience of 2.4 GHz technology. Automatic model...

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to manage, so the focus is on having fun. Race multiple...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to manage, so the focus is on having fun. Race multiple...

This is the Common Sense RC LiPo Safe Charging & Storage Bag for up to 8S Batteries. The Lipo Safe (9" x 12") is the right size to fit everything from small 3.7V LiPo batteries up to even large 29.6V (8S) Lipos.All Common Sense Lipo Safe bags are made...

This is the Traxxas Rustler 4x4 Front and Rear Body Mount Set with 3x12mm Capscrews (4), 3x12mm shoulder screws (2), 3x10mm flat-head machine screws (8), and a 3x12mm buttonhead capscrew.Stock Replacement OnRustler 4x4 BrushedRustler 4x4 VXL

These are the Traxxas E-Revo 2 Talon EXT Tires Mounted on Green Wheels with 17mm Splined Hexes. Each package includes two tires with foam inserts, pre-mounted on green wheels. All-terrain Talon EXT tires provide superior off-road traction and performance...

This is the Common Sense RC Magnum XL LiPo Safe Charging & Storage Bag for storing multiple 3S lipos. The Magnum XL Lipo Safe (9.5" x 7" x 2.25") is designed for transporting your batteries safely and conveniently. It features both a heavy-duty...

This is the Spektrum NX8+ 8 Channel DSMX Transmitter Only NX8+Spektrum is proud to introduce the latest leap forward in Spektrum RC technology — the NX+ Series of aircraft transmitters. These transmitters are currently equipped with the greatest...

This is the Spektrum Soldering Jig While soldering might not be every hobbyist's favorite task, Spektrum developed the Spektrum Soldering Jig to make your life easier. This jig features an adjustable and movable alligator clip to hold wire exactly where...