These are the Traxxas 3x12mm Roundhead Self-Tapping Screws. Each package includes six screws.FitsBandit XL-5Rustler XL-5

This is a pair of Traxxas Bandit Front White Dish Wheels. These feature a slot in the hub to slide over the axle pin on the Bandit XL-5 and VXL buggies. They are also dyeable to create a custom color for your buggy!FEATURES:For the front of Traxxas...

These are the Traxxas Alias Ribbed Front Tires Pre-Mounted on Black Chrome Tracer 2.2" Wheels for the Traxxas Bandit XL-5 and VXL buggies. These are medium-compound tires. The wheels have a slot in hub that slides over the pin in the axle...

This is a pair of Traxxas 94mm Turnbuckles for the original narrow-wheelbase T-Maxx trucks. This is Traxxas part number 2338. Please confirm this part number with your vehicle's manual before purchase.FEATURES:Replaces damaged or worn...

This is a pair of Traxxas GTR XX-Long Shocks with Hard-Anodized Aluminum Shock Bodies and Titanium-Nitride Coated Shafts. These are a great upgrade for Slash 4x4 and Stampede 4x4 trucks. 1/10 scale XX-long GTR shocks represent the peak of suspension...

This is a set of DuBro Standard-Size Nylon RC Airplane Hinges. Each package includes 15 hinges. These feature nylon construction and a steel hinge pin for excellent strength and durability. The hinges have six holes in each side for maximum holding...

This is a pair of RPM Black Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede. This can also be used on the front...

This is the RPM Rear Bumper Mount for the Traxxas 1/10 Summit trucks. RPM bumper mounts for the Traxxas Summit are designed to absorb serious impacts while transferring minimal impact energy into the more fragile components of the truck.RPM engineers...

This is the RPM Chrome Front Bumper and Gray Skid Plate Set for the Traxxas Slash 2WD and Nitro Slash short course trucks. This setup is almost a full ounce lighter than stock!Our two-piece front bumper for the Traxxas Slash 2WD & Nitro Slash is simple,...

These are the RPM Blue Extended Body Mounts for use with RPM Shock Towers on the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless. These are designed for use only with the RPM shock towers.With the release of our shock tower and body mounts for...

This is a pair of Traxxas GTR Shock Springs (XX-Long .762 Green) for use on the 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated...

This is the Traxxas Telemetry Expander Mount 6555 for the Slash 4x4, Stampede 4x4, 1/10 Rally, and Jato vehicles. This part makes it possible to mount the #6550 Telemetry Expander Module on these vehicles.Fits1/10 RallyJato 3.3Slash 4x4 (low-CG)Slash...

This is a Team Integy Aluminum Motor Heatsink with Cooling Fan (Orange) for the Traxxas Slash 2WD, Stampede 2WD, Rustler and Bandit vehicles. This will only fit XL-5 versions.Heat is the enemy, especially when it comes to electric motors. Keep your...

This is the JConcepts Illuzion Chassis Over-Tray for use on the Traxxas 1/10 Slash 2WD trucks. This helps prevent dirt from building up on the chassis and adding unwanted weight. This is for use on trucks with the standard chassis only, not the low-CG...

This is the Motor Mount for the Traxxas Slash 4x4. FEATURES Hardened plastic constructionBlack in color INCLUDESOne motor mount assembled with a 3x6mm flat head machine screwOne 3mm locknut REQUIRESFastening to chassis and installing motor components...

This is the Tekin Pro4 4600kV Brushless Short Course 4x4 Motor with a 5mm Shaft.  Tekin's Pro4 Short Course 4X4 Brushless Motors set a new standard for 4WD short course performance with mind-blowing torque and smooth power. With specifically...

This is a Traxxas Front Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic constructionBlack in colorINCLUDES: One rear shock towerREQUIRES: Installation on chassisSPECS:Length: 71mm (2.80")Width: 49mm (1.93")

This is a package of DuBro Steel Hex Nuts, 4-40 Features 4 per package zinc plated

These are DuBro Socket Head Cap Screws, 2-56 x 1/2 Features Packages of 4 Black Oxide plated

This is the Traxxas replacement Steering Bellcrank Set for the E-Maxx model 3905. This will also work as an upgrade for the Nitro Maxx Series and the E-Maxx model 3906. Features: Composite nylon construction Black in color Replaces a worn or...

This is Team Associated Black Grease. Black Grease 4cc Features: Black in color Comes in a plastic recloseable cylinder shaped container Specs: Contains approximatly 1/2 oz. of grease Comments: This grease is for the thrust balls ONLY (NOT...

This is the Spektrum Air Telemetry Flight Pack Voltage Sensor: Servo FeaturesTransmits Flight Pack or Receiver Pack voltage to the transmitterPrewired to accept Spektrum Z-ConnectorsTM1000 and a Telemetry Capable Transmitter required

These are the replacement FWD/REV Output Gears for the Traxxas Nitro Revo Monster Truck. FEATURES Nylon Construction Black and White in Color INCLUDESOne Nylon FWD Output GearOne Nylon REV Output GearOne White Nylon Drive Dog...

These are the 39mm Turnbuckle Camber Links for the Traxxas Stampede and Rustler VXL. FEATURES Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDESTwo front 39mm (69mm center to center) turnbuckles and...

These are the Traxxas 49mm Turnbuckle Camber Links for the Bandit, Rustler VXL and Stampede VXL. Replace your non-adjustable camber links with these 49 mm (82 mm center to center) metal turnbuckles for trackside camber adjustment. Comes assembled...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, -20% Rate, Orange (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively stiffer rate to absorb hard landings...

This is the Transmission Skid Plate for the Traxxas E-Maxx. FEATURES Gray nylon construction INCLUDESOne nylon transmission skid plate REQUIRESInstallation on the E-Maxx SPECSLength: 4.60" (117mm)Width: 2.40" (61mm)

This is the Integy Silver Aluminum Wheelie Bar for the Traxxas Rustler, Bandit, & Slash 2WD. This will fit the electric XL-5 and VXL 2WD versions of these vehicles.FEATURES Silver aluminum construction One inch hard rubber...

This is the Left and Right Front Bulkheads for the T-Maxx 3.3. FEATURES:Fastens to front skidplate and holds front diff in placeGray in color, constructed of hardened plastic INCLUDES:Left and Right Front Bulkheads for the T-Maxx 3.3 REQUIRES:Fastening...

This is the E-Flite EC3 Battery Connector, Female (2) EC3 Battery Connectors are ideal power output connectors for electric applications. EC3 Battery connectors are available to match up with the EC3 Device connectors. Features:Capable of 60 continuous...

This is the Brake Cam for the Traxxas Nitro Jato Stadium Truck. FEATURES:Aluminum constructionSilver in color INCLUDES:One Metal Brake Cam REQUIRES:Assembly onto Vehicle

This is a pair of Traxxas Assembled GTR Composite Shocks for the Jato 2.5 and 3.3 trucks.  Springs for these are available separately. FEATURES:Factory assembled for front installation on the Jato (1.4mm piston), for rear use, the installed pistons...

This is a High Performance Steel Driveshaft Upgrade Kit for the Traxxas Jato 2.5 and 3.3 trucks.  These will help get more power to the ground than the power-robbing stock driveshafts.  This is one of the first upgrades you should make to...

This is a Set of Red Aluminum Turnbuckles for the Traxxas Jato 2.5 and 3.3.  As with all genuine Traxxas parts, you get a high quality product that looks great and performs well. FEATURES:Anodized aluminum construction, red in colorBlack nylon ball...

These are the Front Left and Right Suspension Arms for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Left Front Suspension ArmOne Right Front Suspension Arm REQUIRES:Assembly onto Vehicle

This is the Traxxas Left & Right Chassis Dirt Guards for the Jato Left & right chassis dirt guards Replacement Part ForJato

This is a Traxxas Jato 2.5 and 3.3 Blue 6061 T-6 Aluminum 3mm Chassis.  This is a stock replacement. The 3 mm Jato chassis is made from 6061-T6 aluminum and anodized blue. Includes adhesive foam pad. Replacement Part ForJato

This is the Traxxas GTR Springs (1.2-Rate Silver Stripe) (2) GTR shock springs use high-quality spring steel with a durable white powder-coated finish. GTR springs are offered in different rates to tune your suspension performance or compensate for...

This is a set of two (2) Traxxas Jato 2.5 and 3.3 Front GTR Shock Springs with the 1.1 Green Rating.

This is a set of two (2) Traxxas Jato 2.5 and 3.3 Rear GTR Shock Springs with the 1.0 Tan Weight Rating.