XRT

This is the Traxxas Rear Red LED Light Bar & White Reverse Light w/Light Bar Mount. Replacement rear LED light bar for the 8990 and 7885 LED light kits. FeaturesHigh VoltageRear Red (24 Red LEDs)White Reverse Light (24 White LEDs)100mm...

This is the Traxxas Insert, threaded steel (replacement inserts for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X) (includes (1) left and (1) right threaded insert) Replacement threaded steel inserts for TUBES turnbuckles. Includes 1 left and 1...

This is the Traxxas Battery Hold-Down Mounts (Left and Right) Includes(2) Left Hold-Down Mounts(2) Right Hold-Down Mounts(4) 4x15 mm Screws

This is the Traxxas Rebuild kit for the Velineon 1200XL Brushless Motor. Includes Front and Rear Plastic Endbells6x17x6 mm Bearings (2)7x6x12 mm Spacer 6x8x3 Washer (1)6x8x1 Washer (1)Button-head Machine Screws (6) Replacement Part...

This is the Traxxas LiPo cell voltage checker/balancer. This voltage checker and balancer requires the #2938X adapter if you are using it with Traxxas iD batteries.Use the LiPo battery checker to view individual LiPo cell voltages and overall...

These are the Traxxas X-Maxx Green Aluminum Wheel Hex Hubs. This is a full set of four.Accessory Part ForX-MaxxXRT

This is a Traxxas X-Maxx and XRT Red Aluminum GTX Shock Cap and Spacer Set. This includes all four shock caps. Set of four red-anodized aluminum shock caps add strength and style to GTX shocks. Shock caps come with pivot balls installed and include...

This is a set of Traxxas X-Maxx and XRT Red Aluminum Hex Wheel Hubs (4). These are a great upgrade from the stock plastic hex hubs. Upgrade your stock 24 mm plastic wheel hubs with the ruggedness and good looks of anodized aluminum. Sold as a set of four...

This is a set of four Traxxas 17mm Splined Serrated Blue Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas X-Maxx and XRT Front and Rear Tie Bar Mount SetFeatures One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and rear bulkhead assemblies in place Includes: Front and Rear...

This is a set of four Traxxas 3x10mm Flat-Head Hex Drive Machine Screws. Set of four 3x10 mm flat-head machine screws with hex drive headsReplacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayDrag SlashFactory Five...

This is the Traxxas Servo Gear Set For 2085R Servos Gear set (for 2085R, 2085RL servo)

This is the Traxxas 4mm Heavy-Duty Threadlock Set Screws Set of six 4 mm set screws (grub screws) with heavy-duty threadlock Replacement Part ForXRT Accessory Part ForX-Maxx

This is the Traxxas Steering Servo Horn and Linkage With Pivot Balls Steering servo horn and 48 mm steering linkage with pre-assembled with pivot balls Replacement Part ForXRT

This is the Traxxas Hold-Down Battery Compartment Pair of snap-lock battery hold-downs with spacers and foam pads

This is the Traxxas Stub Axle (Orange-Anodized) (1)  Add a touch of style to your X-Maxx or XRT with these brightly-anodized aluminum stub axles.    For use with 8s-spec heavy duty driveshaft (#7750X) only.Replacement Part For These...

This is the Traxxas Gear, 26-T (1.0 Metric Pitch) w/ Set Screw26-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can...

This is the Traxxas Telemetry Expander Data Link Wire, used to connect the #6550X Telemetry Expander 2.0 to the #3485 VXL-6s or #3496 VXL-8s electronic speed control. Use this data link cable to connect the 6550X telemetry expander 2.0 to the VXL-4s,...

This is the Traxxas 12-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 12-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-tune the performance...

This is a pair of Traxxas X-Maxx and XRT 4x85mm Hardened Steel Suspension Hinge PinsFeatures Steel construction Fastens lower rear suspension arms to chassis IncludesTwo 4x85mm Suspension PinsSpecificationsDiameter: 0.16" (4mm)Length: 3.3"...

This is the Traxxas X-Maxx Receiver Box Seal Kit, including o-ring, seals, and silicone grease.FeaturesReplaces damaged or missing receiver box seal and cushionsSilicone grease helps to seal receiver box to chassisIncludesTwo Foam Receiver...

These are the Traxxas 4x25mm Button-Head Hex Drive Machine Screws (6). 4x25 mm button-head machine screws with hex drive heads. Set of sixIncludes: Six 4x25mm Button Head Machine Screws Replacement part for these modelsMaxxSledgeUnlimited Desert...

These are the Traxxas 4x15mm Button-Head Hex Drive Machine Screws (6). These are used on the X-Maxx trucks.Includes: Six 4x15mm Button Head Machine Screws Replacement part for these modelsX-MaxxXRT

This is a pack of Traxxas 4x15mm Countersunk Head Head Machine Screws. Each package includes six screws.Replacement part for these modelsBIGFOOT No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Traxxas Replacement Servo Gear Set for the 2085 Steering Servo IncludesOutput GearTop, center, and bottom reduction gearUpper and lower ball bearingsParts list Replacement part for these modelsX-MaxxXRT

This is the Traxxas Steel Motor Shaft Spacer and E-Clip Steel motor shaft spacer and E-clip for Velineon 1200XL motor Replacement Part ForX-MaxxX-Maxx UltimateXRTXRT Ultimate

This is the Traxxas Replacement Gear Covers (3)    Replacement Part ForXRT  

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker...

This is the Traxxas Communication link, telemetry expander The communication link connects your Traxxas 6533 TSM receiver to the optional Telemetry Expander Module 2.0. Accessory Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLChevrolet...

This is the Traxxas Basic Tool set Basic tool set includes 1.5 mm, 2.0 mm, and 2.5 mm hex wrenches, 4-way wrench, 8 mm & 4 mm combo wrench, and U-joint wrench. Includes 1.5mm Hex Wrench2.0mm Hex Wrench2.5mm Hex Wrench4-Way Wrench8mm & 4mm...

This is the Traxxas Premium Speed Bit Handle (Rubber Overmold) The premium speed bit handle holds bits securely with an overmolded rubber grip to provide excellent comfort and more wrenching torque.

This is the Traxxas Speed Bit Handle Medium (One Piece) The medium speed bit handle holds bits securely with excellent hand comfort and more wrenching torque.

This is the Traxxas Spinning Carousel Rack Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.

This is the Traxxas Expander Box Seal Kit Refresh your Telemetry Expander Module with this seal kit. Includes o-ring, seals, and silicone grease

This is the Traxxas LED Lights (High-Voltage) Extension Harness Replacement harness extension for the #7885 X-Maxx / XRT LED light kit. Accessory part for these modelsX-MaxxXRT

This is the Traxxas Front and Rear Driveshaft Bushings Front and rear driveshaft bushings Replacement Part ForXRT

This is the Traxxas Medium GTX (Natural Finish) Shock Springs (4.101 rate pink stripe) (2) Medium-length GTX shock springs are offered in different rates to tune your XRT suspension performance or compensate for lighter or heavier vehicle configurations...

This is the Traxxas Medium GTX (Natural Finish) Shock Springs (2.599 rate white stripe) (2) Medium-length GTX shock springs are offered in different rates to tune your XRT suspension performance or compensate for lighter or heavier vehicle configurations...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix, TRX engines and www.Traxxas.com logos. Perfect for adding...

This is the Traxxas 14-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 14-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model...