Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
TRA3631R
Traxxas Red HD Front Suspension Arms for 2WD Slash Rustler Stampede
This is the Traxxas Red HD Front Suspension Arms for 2WD Slash Rustler Stampede. Heavy-duty suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite material. Traxxas designed this composite specifically for...$10 -
TRA1675
Traxxas Self-Lubricating 5x11x4mm Bushings (14)
These are the Traxxas Self-Lubricating 5x11x4mm Bushings (14). These are Traxxas part 1675.FeaturesMade of metalIncludes: 14 bushingsSpecifications: 5x11x4mmComments: These bushings would work on any vehicle using 5x11x4mm bushings. Fits1/10 Monster...$5 -
TRA6550X
Traxxas Telemetry Expander 2.0
This is the Traxxas Telemetry Expander 2.0. Compatible with TQi transmitters and vehicles equipped with a 6533 TSM receiver, the Telemetry Expander 2.0 is a the best option for advanced data communication. Expanded InnovationTraxxas telemetry...$3995 -
TRA5556
Aluminum Slipper Pressure Plate & Hub: Jato
This is a Traxxas Jato 2.5 and 3.3 Aluminum Slipper Pressure Plate and Hub.$8 -
GPM-CRA028-BK
GPM Black Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
GPM-SLA2W030-B
GPM Blue Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash
This is the GPM Racing Blue Aluminum Rear Shock Tower for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting hardware...$2190 -
GPM-CRA332F-GS
GPM Gunmetal Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Gunmetal Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
GPM-CRA038GC-OR
GPM Orange Aluminum Transmission Cover for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Transmission & Spur Gear Cover for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a replacement for Traxxas part 3792.Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas...$1999 -
RRP8714
Robinson Hard Steel 14T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 14-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
TRA3767X
Traxxas Red Aluminum Ultra Shock Cap Set
This is the Traxxas aluminum (Red Anodized Shock Caps Shock caps, aluminum (Red-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps...$14 -
TRA8716X
Traxxas Speed Bit 3-Pc Ball End Hex Drivers 2.0mm 2.5mm 3.0mm, 1/4" Drive
This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive. This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits. The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...$3295 -
GPM-CRA030-R
GPM Red Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
RPM70592
RPM Body Skid Rails
This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3" (76.2mm) of open...$899 -
TKR1951X
Tekno M6 Driveshafts and Hub Carriers: Slash 2WD, Nitro Rustler, Nitro Stampede & (Rear) Stampede 2WD
These are the Tekno M6 Driveshafts and Hub Carriers for Traxxas Slash 2WD XL-5 & VXL, Nitro Rustler, Nitro Stampede and Stampede 2WD (Rear) trucks. This set will give your truck the ultimate in performance and durability. Features: Custom 6mm...$3999 -
TRA3646
Traxxas 3x15mm Flat-Head Hex Drive Machine Screws (6)
This is a set of Traxxas 3x15mm Flat-Head Hex Drive Machine Screws. Each package includes six screws.Includes: Six 3 x 15mm Flathead Hex Machine Screws Replacement Part ForBandit VXLDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLMaxxRustler...$250 -
TRA8361
Traxxas 4-Tec 2.0 Black Shock Caps with Hollow Balls (4)
These are the Traxxas Black Shock Caps with Hollow Balls (4). These come stock on the Ultra Shocks on the 4-Tec 2.0 vehicles like the Ford GT and Mustang GT, but will also work with other vehicles using Ultra Shocks.Replacement Part For4-Tec 2.0 AWD...$5 -
TRA3631X
Traxxas Black HD Front Suspension Arms for 2WD Slash Rustler Stampede
This is the Traxxas Black HD Front Suspension Arms for 2WD Slash Rustler Stampede. Heavy-duty front suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite material. Traxxas designed this composite...$10 -
TRA3631A
Traxxas Blue HD Front Suspension Arms for 2WD Slash Rustler Stampede
This is the Traxxas Blue HD Front Suspension Arms for 2WD Slash Rustler Stampede. Heavy-duty suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite material. Traxxas designed this composite specifically for...$10 -
TRA3694
Traxxas LED Light Kit Complete w/ Front & Rear Bumpers: Stampede 2WD
This is the Complete LED Light Set for the Traxxas Stampede. Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Stampede, the kit includes 4 brilliant white forward-facing LEDs and two...$3995 -
TRA3678P
Traxxas Pink Wheelie Bar for Stampede 2WD, Slash, Rustler, Bandit
This is the Traxxas Pink Wheelie Bar for Stampede 2WD, Slash 2WD, Rustler, and Bandit vehicles. This will work on XL-5 brushed and VXL brushless versions.Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacRustler VXLRustler XL-5SkullySlash 2WDSlash...$15 -
TRA4976
Traxxas Wheelie Bar Wheels & Axles: T-Maxx 3.3
These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel INCLUDES:Four wheels and two axles REQUIRES:Installing on wheelie bar SPECS:Thickness: 0.39" (10mm)Diameter: 1.02" (26.1mm)$4 -
G3R-T1001-ORANGE
Gen3 RC Orange Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Orange Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$5399 -
GPM-RUS019-B
GPM Blue Aluminum Caster Blocks for 2WD Stampede Rustler Slash
These are the GPM Racing Blue Aluminum Caster Blocks for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and others vehicles listed below. Machined from 6061-T6 aluminum, these are a great way to add strength, tighten up handling, and dress up...$1399 -
GPM-SLA057-B
GPM Blue Rear Turnbuckle Camber Link for 4x4 Slash Rustler Stampede
These are the GPM Racing Blue Aluminum & Steel Rear Turnbuckle Camber Link for Traxxas brushless 1/10 Slash 2WD 4x4, Rustler 2WD & 4x4, Stampede 2WD & 4x4 and Nitro Slash vehicles. These feature aluminum rod ends with a durable steel turnbuckle for...$1990 -
RRP8722
Robinson Extra Hard 5mm Bore 22T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 22-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA1747T
Traxxas Aluminum (4mm) Flanged and Serrated Nuts (Orange-Anodized) (4)
These are the Traxxas Flanged and Serrated Nuts, Aluminum (4mm) (Orange-Anodized) (4)Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking...$750 -
GPM-SLA2W028-B
GPM Blue Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
GPM-CRA055-B
GPM Blue Aluminum Front Suspension Arms for 2WD Slash Rustler Stampede
These are the GPM Racing Blue Aluminum Front Suspension Arms for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Nitro Slash trucks.These are a direct fit upgrade for stock Traxxas part 3631 suspension arms.Accessory Part ForTraxxas 1/10...$1999 -
GPM-CRA030-G
GPM Green Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Green Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
GPM-CRA021-R
GPM Red Aluminum Steering Blocks for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Red Aluminum Steering Blocks for the Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Slash trucks.This is a direct replacement for Traxxas part 3736 steering blocks.Accessory Part ForTraxxas 1/10...$1399 -
HRASTE90MR128
Hot Racing Front Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Front Multi-Rate Springs (3 Pairs) for Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will work on the XL-5 brushed and VXL brushless trucks.FEATURES:Spring Steel ConstructionMulti-Rate Springs, Dual-Rate (DRS) allow...$988 -
TRA2760
Traxxas Blue Aluminum Shock Caps (2) for 4760 & 4761 Shocks
These are the Traxxas 2760 Blue Aluminum Shock Caps. Each package includes two shock caps. These are for use with Traxxas 4760 and 4761 aluminum shocks.Fits these vehicles when running Traxxas 4760 and 4761 shocks:1/10 Monster Jam Trucks1/10...$7 -
TRA2270
Traxxas High-Torque Digital Metal Gear 2270 Servo
This is the Traxxas High-Torque Digital Metal Gear 2270 Servo High-Torque Digital Metal Gear ServoThe waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 236 oz-in of torque on tap and full metal gears, the 2270 servo...$5995 -
TRA3649
Traxxas Stampede Hawaiian Painted Body
This is the Traxxas Stampede Hawaiian Painted Body. This comes pre-painted, trimmed, and ready for installation! These are a direct fit for Stampede XL-5 2WD, 4x4, and Stampede VXL 2WD and 4x4 trucks. Throw a shiny new body on your truck to bring back...$3995 -
TRA3643R
Traxxas TUBES Red 7075-T6 Aluminum 83mm Camber Links
These are the Traxxas TUBES Red-Anodized 7075-T6 Aluminum 83mm Camber Links. The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for strength and good looks. An alumium adjustment wrench...$3495 -
RRP8717
Robinson Extra Hard 5mm Bore 17T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 17-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
RRP8719
Robinson Extra Hard 5mm Bore 19T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 19-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA2381X
Traxxas 2381X Main Diff with Steel Ring Gear & Hardware
This is the Traxxas 2381X Main Diff with Steel Ring Gear, Side Cover Plate, and Screws.Fits:1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacRustler VXLRustler XL-5SkullySlash 2WD XL-5Slash 2WD VXLStampede VXL 2WDStampede XL-5 2WD$6 -
TRA5525R
Traxxas 5525R Heavy Duty Rod Ends (8)
This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod endsSpecificationsLength: 31.5mm (1.24")Width at ball...$4 -
TRA2336
Traxxas 78mm Turnbuckles (2)
This is a pair of Traxxas 78mm Turnbuckles.These can be used on:1/10 Monster Jam TrucksCraniacNitro SportRustler XL-5SkullyStampede XL-5 2WD$2