Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
TRA1726ATraxxas Black Antenna Tube w/Cap & Wire Retainer
This is the Traxxas Black Antenna Tube with Cap and Wire Retainer. These are compatible with nearly all Traxxas cars, trucks and boats. The sleek black design looks great as well.$2 -
GPM-SLA055-ORGPM Orange Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Orange Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
GPM-CRA030-ORGPM Orange Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
TRA3758TTraxxas Blue Front Springs (2) for Long Ultra Shocks
These are the Traxxas Blue Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis. Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaHoss 4X4...$5 -
HRACSG1831Hot Racing 31-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...$788 -
RRP8716Robinson Extra Hard 5mm Bore 16T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 16-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA3677Traxxas Wheelie Bar Mount: Stampede, Rustler, Bandit, Slash
This is an optional Wheelie Bar Mount for the Traxxas Electric Stampede, Rustler and Bandit. FEATURES:Constructed of hardened plastic, black in colorInstalls at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES:Assembled optional...$4 -
TRA2742XTraxxas Rod Ends & Hollow Balls (6)
This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...$4 -
TRA5529Shim Set (4): Jato
This is a Traxxas Jato 2.5 and 3.3 Shim Set. This includes four silver metal hollow balls and four 3mm silver washers. These are for adjusting the roll center of the truck.$350 -
PRO633500Pro-Line Replacement 6x30 to 12mm Narrow & Wide Hex Adapters
This is a pair of Pro-Line Replacement 6x30 to 12mm Narrow & Wide Hex Adapters. Do you need replacement plastic 6x30 to 12mm Hex Adapters for your Raid 6x30 Removable Hex Wheels? You came to the right place! This pack contains a pair of Narrow 12mm...$899 -
PRO1019010Pro-Line Hyrax 2.8" Tires on Raid Removable Hex Wheels
This is a pair of pre-mounted Pro-Line Hyrax 2.8" Tires on Raid Removable Hex Wheels. Pro-Line is very excited to announce the Hyrax 2.8" tire pre-mounted to the Raid Black 6x30 Removable Hex wheel! We take the guesswork out of your glue job by doing the...$4799 -
GPM-SLA2W055-GGPM Green Aluminum Front Suspension Arms fits 2WD Stampede Rustler Slash
These are the GPM Racing Green Aluminum Front Suspension Arms for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum and anodized for a great looking finish, these are tough and help make your truck stand out. Hinge pins...$2690 -
GPM-RUS030-RGPM Red Aluminum Rear Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, and Bandit vehicles. These are machined from 6061-T6 aluminum and anodized with a beautiful finish. Mounting hardware is also included.This...$1699 -
G3R-T1001-REDGen3 RC Red Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Red Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$49.99 $2499 -
TRA2567Traxxas 3x23mm Roundhead Machine Screws (6)
These are the Traxxas 3x23mm Roundhead Machine Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacSkullyStampede XL-5 2WD$150 -
TRA2558Traxxas 3x6mm Roundhead Machine Screws (6)
These are the Traxxas 3x6mm Roundhead Machine Screws. Each package includes six screws.Fits:1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashNitro VeeSkullyStampede XL-5 2WD$150 -
RPM80915RPM Blue Motor Protector for Slash 2WD, Rustler, Stampede 2WD, Bandit
This is the RPM Blue Motor Protector for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. This is designed to be used in place of the bumper or wheelie bar. See Tech Notes at bottom for more information.Many Traxxas electric vehicles...$499 -
TRA2554Traxxas Engine Backplate Screws (6): TRX 2.5, 2.5R, 3.3
These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black steel cap head screws Specifications:Length: 5mmDiameter:...$250 -
TRA3660RTraxxas Bigfoot No. 1 Body Conversion Kit For Clipless Mounting
This is the Traxxas Bigfoot No. 1 Body Conversion Kit For Clipless Mounting - Includes front & rear body mounts, latch, hardware The clipless body conversion kit includes all the body mounts, latches, and hardware required to convert your standard...$15 -
TRA3661XTraxxas Blue-X Bigfoot No. 1 Body
This is the Traxxas Bigfoot Body No. 1 (Painted, Decals Applied) (Blue-X) Traxxas replacement BIGFOOT No. 1 bodies come fully painted with pre-installed body accessories. They’re ready to mount right out of the bag with no trimming or reaming...$7995 -
G3R-T1001-BLUEGen3 RC Blue Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Blue Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$49.99 $2499 -
GPM-CRA028-ORGPM Orange Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas...$999 -
TRA3758Traxxas Black Front Springs (2) for Long Ultra Shocks
These are the Traxxas Black Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaHoss 4X4...$2 -
INTT7983RIntegy Red Aluminum Gear Box for Traxxas Stampede, Rustler, Bandit, Slash
This is the Integy Red Aluminum Gear Box Housing for the Traxxas Stampede 2WD, Rustler, Slash 2WD and Bandit. This will fit XL-5 versions.Note: Not compatible with Traxxas wheelie bar or motor guard assemblyFEATURES Red in Color Made of Aluminum Very...$2699 -
HRATE1006SLHot Racing Blue Aluminum 12mm Clamping Wheel Hexes for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Blue Aluminum 12mm Clamping Wheel Hexes for the front and rear of Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will fit XL-5 brushed and VXL brushless versions.FEATURES:- CNC machined aluminum, anodized blue-...$1688 -
TRA5525RTraxxas 5525R Heavy Duty Rod Ends (8)
This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod endsSpecificationsLength: 31.5mm (1.24")Width at ball joint: 11mm (0...$4 -
TRA3757Traxxas Black Rear Springs (2) for XXL Ultra Shocks
This is the Traxxas Black Rear Springs for use on the XX-Long Ultra Shocks used on vehicles like the Slash 2WD, Rustler, Stampede 2WD, Stampede 4x4, and others.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro...$2 -
TRA3677ATraxxas Green Wheelie Bar Mount for Slash 2WD Rustler Stampede 2WD Bandit
This is the Traxxas Green Wheelie Bar Mount with Hardware for Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.IncludesOne wheelie bar mountHardwareInstructions Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacRustler VXLRustler...$4 -
TRA3646Traxxas 3x15mm Flat-Head Hex Drive Machine Screws (6)
This is a set of Traxxas 3x15mm Flat-Head Hex Drive Machine Screws. Each package includes six screws.Includes: Six 3 x 15mm Flathead Hex Machine Screws Replacement Part ForBandit VXLDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLMaxxRustler...$250 -
TRA2587Traxxas 3x10mm Cap-Head Hex Machine Screws (6)
These are the Traxxas 3x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Monster Jam Trucks1/10 SummitBandit VXLBandit XL-5CraniacFunny CarRevo 3.3Rustler XL-5SkullySlayerSlayer...$250 -
TRA3668Traxxas Rear All-Star Chrome Wheels w/ Talon Tires (2): Stampede, Bigfoot
These are the Traxxas All-Star Chrome Wheels with Talon Tires Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with foam inserts and pre-glued to tough 2.8″ All-Star 5-spoke chrome wheels. The...$2595 -
TRA2573Traxxas 4x15mm Roundhead Machine Screws (6)
These are the 4x15mm Round Head Machine Screws from Traxxas.FeaturesSteel construction Silver in colorIncludesSix 4x15mm Round Head Screws SpecificationsLength: 15mm (0.59")Width: 4mm (0.16")$150 -
GPM-SLA102R/KITA-SGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Silver)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Silver)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-RGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Red)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Red)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-ORGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Orange)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Orange)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-GSGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Gray Silver)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Gray Silver)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-GGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Green)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Green)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-BKGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Black)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Black)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-BGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Blue)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Blue)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-CRA038GC-BKGPM Black Aluminum Transmission Cover for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Transmission & Spur Gear Cover for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a replacement for Traxxas part 3792.Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas...$1999