Slayer Pro 4x4

This is the Fuel Tank Rebuilt Kit for the REVO from Traxxas. FEATURES:Rubber, slicone, plastic, & nylon construction INCLUDES:Mounting post (1)Grommets (2)Tank gaurd (1)Mounting clips (2)O-ring for cap (1)Pull ring for cap (1)Mounting screws (4)

This is the Clutch Bell with Washer and E-Clip for the Traxxas Revo. FEATURES:Metal constructionFive cooling holes on the face of bell (bellow the teeth) INCLUDES:One clutch bellTwo teflon washerTwo e-clip REQUIRES:This clutch bell uses 5X11 bearings...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system. SPECS:Length: 6mm (0.24")

This is the Traxxas Front, Mid-Front, and Rear Skid Plate set for the Revo 3.3, 1/10 E-Revo, and Slayer trucks.IncludesFront, mid-front, and rear skid plates(8) 3X10mm button head screws(1) 3X30mm button head screwsFits1/10 E-Revo Brushed1/10 E-Revo...

This is the Traxxas Front Bulkhead for the Revo and Slayer. Features: Black plastic construction Rocker shafts preinstalled Includes:Front bulkhead halves(2) rocker shafts(4) 4X14mm button head screws

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included are one piston, one...

This is the Traxxas Universal Glow Plug Wrench Glow plug wrench (Universal wrench) Accessory Part ForJato 3.3Nitro RustlerNitro SlashRevo 3.3 Slayer Pro 4x4T-Maxx 3.3T-Maxx Classis

This is the Replacement EZ-Start 2 Housing Set with Hardware and Motor Bushing. Includes(5) 3x12 mm screws (1) 3x20 mm screwMotor Bushing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

This is the GPM Racing Orange Aluminum Rear Body Post Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized...

This is a set of six Traxxas 4mm Grub / Set Screws with Threadlock. Set of six 4 mm set screws (grub screws) with threadlock Replacement Part ForE-Revo VXL BrushlessJatoNitro SlashRevoSlayer Pro 4X4SummitT-MaxxTRX 2.5RTRX 3.3

This is the Traxxas Telemetry Expander Mount 6556 for the XO-1, E-Revo*, Summit*, T-Maxx, E-Maxx, Revo 3.3, and Slayer Pro trucks. This part makes it possible to mount the #6550 Telemetry Expander Module on these vehicles.*NOTE: The E-Revo and Summit...

These are the Traxxas Steel Rocker Arm Posts for the Revo and Slayer vehicles. Features: Black steel construction Includes: Two Rocker Arm Posts Specifications:Length: 1.3" (32.8mm)Diameter: 0.20" (5mm) unthreaded portion, 0.23" (5.9mm) threaded portion

These are the Center Half Shafts for the Traxxas Revo 3.3. FEATURES:Constructed of hardened plasticFor front and rear driveshafts INCLUDES:Two external splined shaftsTwo internal splined shafts REQUIRES:Installing between yokes on each drive shaft...

This is the 2.6 rate Spring Set for the Traxxas GTR Shocks used on the Revo. FEATURES:Spring Steel ConstructionRed Outer Nylon CoatingYellow 2.6 tension rating INCLUDES:Two Red 2.6 Springs for the Traxxas GTR Shocks used on the...

This is a Traxxas Progressive 3 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5319 and TRA5319X pushrods.  If you need the pushrods too, search our store for the listed part numbers.

This is a package of Traxxas Small Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  These are used on the steering linkages of the Revo. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:Six Rod EndsSix Pivot...

This is a Traxxas Revo 2.5 and 3.3 Steering Servo Mount Set.  This includes two sets of servo mounts.

This is the GPM Racing Orange Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

This is the GPM Racing Black Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

These are the Traxxas Transmission Gearbox Halves for Revo 3.3 and Slayer trucks. This includes the rubber access plug.IncludesFront and rear gearbox halvesRubber access plugFitsRevo 3.3SlayerSlayer Pro

This is the Traxxas Primary Clutch Assembly with Pins for Revo 3.3, T-Maxx 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Throttle Servo Mount with Mounting Screws for the Revo 3.3, Slayer, and Slayer Pro trucks.Fits:Revo 3.3SlayerSlayer Pro

This is the Traxxas Aluminum Exhaust Header for the Revo and Slayer. Features: Aluminum construction Silver in color Fluted on tuned pipe end for better silicone coupler connection Heatsink engine mounting flange Specifications:Length: 59mm (2...

This is the Replacement Complete Gear Set for the EZ Start 2 System. The EZ Start 2 system is used on the Traxxas T-Maxx 2.5. FEATURES:White plastic gears INCLUDES:Eight different gearsOne metal 4mm sleeveOne 5x12.5mm shaft REQUIRES:The remainder of the...

This is a set of six Traxxas 4x4 Blue Aluminum Button-Head Screws for the Jato 2.5 and 3.3 trucks.

This is a Green Tension Shock Spring Set for the Revo GTR Shocks. These springs are installed on the shock bodies. FEATURES:Red in colorTan band on spring indicates 4.1 tension rating INCLUDES:Two 4.1 rear shock springs REQUIRES:Nothing.  These are...

This is a Traxxas 40mm Vented Steel Brake Disc for the Revo 2.5 and 3.3 trucks.  All items are brand new in the factory package, with the full manufacturer warranty.

This is the Traxxas Fuel Filler Bottle (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and O-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are...

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker...

This is the Traxxas Communication link, telemetry expander The communication link connects your Traxxas 6533 TSM receiver to the optional Telemetry Expander Module 2.0. Accessory Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLChevrolet...

This is the Traxxas Premium Speed Bit Handle (Rubber Overmold) The premium speed bit handle holds bits securely with an overmolded rubber grip to provide excellent comfort and more wrenching torque.

This is the Traxxas Spinning Carousel Rack Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.

This is the Traxxas Expander Box Seal Kit Refresh your Telemetry Expander Module with this seal kit. Includes o-ring, seals, and silicone grease

This is the Traxxas RC Car/Truck Carrier Backpack Features Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Zippered Front Pockets for Tools and Parts Four-Compartment Battery Organizers Thick Padded Sidewalls Large Side...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...

This is the Traxxas Shoulder Strap for the #9917 Duffle Bag Add additional carrying support with the strap for your RC Car/Truck Duffle Bag Features Heavy Duty Shoulder Strap for Fuffel Bag with Metal Latches Padded Sleeve For Added Comfort Adjustable...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix, TRX engines and www.Traxxas.com logos. Perfect for adding...

This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3" (76.2mm) of open...

This is the GPM Racing Black Aluminum Rear Body Post Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized...