Slayer Pro 4x4

This is a pair of Traxxas Axle Carriers for Revo 3.3, E-Revo, E-Maxx, T-Maxx, Summit, Slayer. These are for use with 6x13mm ball bearings, or use the included bearing adapters to run 6x12mm ball bearings.Includes:One Left Axle CarrierOne Right Axle...

This is the optional Differential Spool for the Traxxas Revo, TRAC71**. FEATURES:Constructed of steelInstalls in diff housing on either front or rear wheels INCLUDES:One Differential Spool for the Traxxas Revo with instruction sheet REQUIRES:Differential...

This is the replacement Fuel Tank Cap O-Rings for the Traxxas Revo model. FEATURES:Rubber construction, orange in color INCLUDES:Two rubber o-rings REQUIRES:Installing onto the fuel tank cap SPECS:Inside diameter: 18mmOutside diameter: 22mm

This is a Traxxas Front and Rear Body Mount Set for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, and Slayer trucks.  Included are the front and rear body mounts, front and rear body posts, and screws.

This is the GPM Racing Green Aluminum Front Body Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish...

This is the GPM Racing Blue 6061-T6 Aluminum 90T Progressive-2 Front Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x16-2pcsStainless Steel Round Head...

This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro, and T-Maxx 3.3.

This is a package of six Traxxas 4x6mm Button-Head Hex Machine Screws with ThreadlockFits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

These are the Traxxas Blue Aluminum 17mm Splined Wheel Hubs and Nuts for vehicles such as the T-Maxx 3.3, Revo 3.3, E-Revo Brushless, E-Maxx Brushless, Summit, Slayer Pro, and others.Newly designed 17mm racing hubs and wheel nuts incorporate new...

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5 engine REQUIRES:Installing in air filter boot on...

These are Traxxas 3x30mm Button Head Screws (6). Features: Steel construction Black in color Button head design Includes: Six 3x30mm button head screws Specifications:Length: 1-3/16" (30mm)Diameter: 1/8" (3mm)

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

This is a Two-Speed Close Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 40T 2nd speed gearOne 13T/16T input gearOne screw pin REQUIRES:Installation...

This is a pair of Traxxas 5x10x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2- Bearings Specs5x10x4mm

This is a pack of Traxxas Black 90-Degree Angled Body Mounting Clips (10 clips).  The angled design helps make it easier to remove and install them from the body posts. These can be used as clips on numerous vehicles for the body and other places...

This is the Hot Racing Aluminum Rear Body Post Mount for the Traxxas 1/10 E-Revo, E-Revo 2.0, Revo 3.3, Slayer Pro, and 1/10 Summit trucks.This is an upgrade to the rear mount in Traxxas part 5314.Features- CNC Machined 6061 aluminum construction-...

This is the Hot Racing Aluminum Front Body Post Mount for Traxxas 1/10 E-Revo, E-Revo 2.0, Revo 3.3, Slayer Pro, and 1/10 Summit trucks.This upgrade fits in place of the front body mount in Traxxas part 5314FeaturesCNC Machined 6061 aluminum...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

These are the Traxxas 90-Degree Body Clips. These are a smaller size, typically used to hold down receiver covers, battery hold-downs, bodies on smaller trucks, etc.FeaturesMetal ConstructionSilver in ColorBent for Easy RemovalIncludesTen Bent Silver...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...

This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas. FEATURES:Constructed of steel with serrated flange area for sure gripNylon insert INCLUDES:Eight 5mm Flanged Nylon Locking Nuts REQUIRES:8mm nut drivers SPECS:Hex Size: 8mmInner Diameter:...

This is a package of Traxxas Large Rod Ends for the Rear Toe Link for the Revo 2.5 and 3.3.  These can be broken easily if you run your truck on anything but smooth ground.  It is a good idea to have spares on hand.

These are Traxxas Body Clips for the Traxxas Vehicles.  It is always good to have extra body clips around to keep your body securely fastened.  These fit all of the .15, 2.5, and 3.3 versions of these trucks, as well as many other vehicles...

These are the Traxxas Sway Bar Mounts and Wires for 1/10 E-Revo, Revo 3.3 and Slayer Pro trucks.IncludesOne Thick Front Sway Bar (black in color)One Thin Front Sway Bar (silver in color)One Thick Rear Sway Bar (black in color)One Thin Rear Sway Bar...

This is the Traxxas Right-Side Electronics Box with Cover, Rubber Charge Jack Plug, Foam Padding and Adhesive. This fits Revo 3.3 and Slayer trucks.FitsRevo 3.3SlayerSlayer Pro

This is the GPM Racing Green Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

These are the Traxxas Forward and Reverse Primary Gears for Revo 3.3, T-Maxx 3.3 (with reverse), and Slayer trucks.IncludesOne Plastic Forward gearOne Steel Reverse gearOne Steel retaining clipOne copper gear washerOne gear pinOne instruction sheet ...

These are the Traxxas Aluminum Rocker Arm Posts (4) for Revo 3.3, 1/10 E-Revo, and Slayer trucks. Upgrade to these to save weight over the stock steel rocker posts.Includes: Four aluminum rocker arm postsFits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo...

This is a package of six Traxxas 4x10mm Button-Head Hex Machine Screws.Replacement part forE-Revo VXL BrushlessFord Fiesta ST RallyHoss 4X4 VXLMaxxRevoRustler 4X4 VXLSlash 4X4 UltimateSlayer Pro 4X4SummitUnlimited Desert Racer

This is a set of Traxxas Axle Pins.These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. Features: Axle pins are steel Includes: Four 2.5x12mm axle pins Replacement part for these modelsRevoSlayer...

This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...

This is a Traxxas Revo 2.5 and 3.3 Steel Suspension Hinge Pin Set for the front or rear of the truck.  There are enough pins included to replace the hinge pins in the front or rear of the truck.  To replace all of...

This is the GPM Racing Blue Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

This is the GPM Racing Black 6061-T6 Aluminum 90T Progressive-2 Rear Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x14-4pcsLock Nut 3mm-4pcsAlloy...

This is the Traxxas 43-Tooth 1st Speed Gear for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.Includes: One 43T 1st Speed GearFitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Revo and Slayer Receiver and Battery Box with cover, foam pad, adhesive, rubber charge jack plug, 4x8mm screw, and two 4x12mm screws. This set contains both boxes to accommodate either AA battery holder or a 5-cell receiver flat pack...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...